How do you install a timing belt on a Daewoo Lanos?
How do you install a timing belt on a Daewoo Lanos?
Remove the power steering bolts and the timing belt covers. Temporarily install the crankshaft bolt and turn the engine clockwise until the mark on the crankshaft pulley, which is a triangle stamped into the crank sprocket, is aligned with the corresponding triangular mark on the block.
How many miles does Daewoo Matiz timing belt work?
THE CAR HAS RUN 57000 KMS WITH ORIGINAL TIMING BELT STILL INTACT. IT GIVES ME THE MILEAGE OF 15 TO 18 KMPL IN CITY WITH AC & 21 TO 24 KMPL WITH AC ON HIGHWAYS, FREEWAYS. Loading…
Where to place the belt on a Daewoo water pump?
Keep all the belt tension on the right side away from the tensioner. Loosen the bolts in the water pump and rotate the water pump counterclockwise to apply tension to the belt. Watch the tensioner, which is above the water pump, and apply tension with the water pump until the pointer on the tensioner lines up with the notch above it.
Can a timing belt be replaced at the wrong tension?
Unfortunately it is not uncommon for the replacement belt to be installed at the incorrect tension because although the technician may have gone through the right procedure, they have undertaken the process on a hot engine.
How do you install a timing belt on a Daewoo water pump?
Tighten the water-pump bolts. Install the timing-belt covers and the bolts in the power-steering pump and tighten. Remove the crankshaft bolt and install the crank pulley and the bolt, then torque the crankshaft pulley bolt to 70 foot pounds of torque. Install all components in reverse order of removal.
How do you set the cam timing on a 2001 Daewoo Matiz?
I would replace BOTH the timing belt and the drive belt at the same time, since both are very inexpensive, even from the Ford dealer. Line up both timing marks on both the cam and crank sprockets in the 12 o’clock position. The marks are very easy to see, once you remove the timing belt cover.
Is it safe to replace timing belt on Daewoo Lanos?
This engine has been identified as an interference engine, whereas in the event of a failure of the timing belt the likelihood of major engine damage would be extremely high. For this reason it is not recommended to surpass the mileage for replacement.
Unfortunately it is not uncommon for the replacement belt to be installed at the incorrect tension because although the technician may have gone through the right procedure, they have undertaken the process on a hot engine.
Remove the power steering bolts and the timing belt covers. Temporarily install the crankshaft bolt and turn the engine clockwise until the mark on the crankshaft pulley, which is a triangle stamped into the crank sprocket, is aligned with the corresponding triangular mark on the block.
Keep all the belt tension on the right side away from the tensioner. Loosen the bolts in the water pump and rotate the water pump counterclockwise to apply tension to the belt. Watch the tensioner, which is above the water pump, and apply tension with the water pump until the pointer on the tensioner lines up with the notch above it.
Who is the owner of Daewoo Lanos auto service?
He has owned an auto service facility since 1982 and has over 45 years of technical experience as a master ASE tech. Bowman has a business degree from Pennsylvania State University and was an officer in the U.S. Army (aircraft maintenance officer, pilot, six Air Medal awards, two tours Vietnam). How to Change the Timing Belt on a 1999
