Easy tips

How do you get a computer code on a PT Cruiser?

How do you get a computer code on a PT Cruiser?

In addition, as with all vehicles sold in the United States, the system is OBDC3 compatible, so that a standard diagnostic device can be plugged into a standard jack to get computer codes. When some problems are found, the computer lights up the “engine light;” others are ignored until a mechanic asks for them.

How to get the fuel injection code on a Chrysler PT Cruiser?

All Chrysler vehicles with fuel injection have had some form of “error checking.” In many older vehicles, a person could easily turn the key back and forth a few times to get a two-digit code . With the PT Cruiser, a longer code seems to be used.

Why is my knock sensor on my PT Cruiser wrong?

Knock sensor (#1) signal is wrong. Knock sensor (#2) signal is wrong. A coil is drawing too much current. A required change in air/fuel mixture was not detected during diagnostic test. An problem was detected in the EGR solenoid control circuit.

How often should you change spark plugs on a PT Cruiser?

Bad spark plugs will cause poor engine performance and fuel mileage and need to be changed out. On the PT Cruiser, you should change your spark plugs every 30,000 miles (100,000 if you use platinum spark plugs).

Where do I find the code on my PT Cruiser?

To get the codes, move the key from Run to Off to Run to Off to Run within five seconds. It does not always work the first time. (Run is JUST before Start). The code will show up in the odometer – thank your lucky stars for this, since the codes used to get blinked on the engine light.

All Chrysler vehicles with fuel injection have had some form of “error checking.” In many older vehicles, a person could easily turn the key back and forth a few times to get a two-digit code . With the PT Cruiser, a longer code seems to be used.

Where can I find the misfire code for spark plugs?

Diagnostics > By Trouble Code > P0300 P0301 P0302 P0303… People ask me about misfire codes after they’ve replaced all the spark plug wires, coil, and plugs and they still have the code.

How much is the PT Cruiser engine control module?

10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Just because your vehicle has a retro style appeal, doesn’t mean that it’s not equipped with some of the latest technology to improve its fuel economy and performance. Keep up your vehicle’s performance with a new Chrysler PT Cruiser engine control module from AutoZone.

What happens to the engine light on a Chrysler PT Cruiser?

The “engine light” stays on when a serious emissions or engine problem is found, until the code is erased. Chrysler vehicles have a “limp in” mode which reverts to a pre-programmed “guessing map” for timing, fuel delivery, etc. when a critical sensor fails.

In addition, as with all vehicles sold in the United States, the system is OBDC3 compatible, so that a standard diagnostic device can be plugged into a standard jack to get computer codes. When some problems are found, the computer lights up the “engine light;” others are ignored until a mechanic asks for them.

10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Just because your vehicle has a retro style appeal, doesn’t mean that it’s not equipped with some of the latest technology to improve its fuel economy and performance. Keep up your vehicle’s performance with a new Chrysler PT Cruiser engine control module from AutoZone.

The “engine light” stays on when a serious emissions or engine problem is found, until the code is erased. Chrysler vehicles have a “limp in” mode which reverts to a pre-programmed “guessing map” for timing, fuel delivery, etc. when a critical sensor fails.

What happens if there is no computer code on my PT Cruiser?

Alan Borgolotto noted that “if you do it too quickly it doesnt work (got to wait to see the odometer light up” and that if you have no codes, the odometer will say “done.”

Knock sensor (#1) signal is wrong. Knock sensor (#2) signal is wrong. A coil is drawing too much current. A required change in air/fuel mixture was not detected during diagnostic test. An problem was detected in the EGR solenoid control circuit.

What does p0740 mean on a powertrain computer?

P0740 Diagnostic Theory for Shops and Technicians. When the code P0740 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is seeing greater than a 200 RPM difference between the rotational speed of the Torque Converter and the Transmission Input Shaft.

P0740 Diagnostic Theory for Shops and Technicians. When the code P0740 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is seeing greater than a 200 RPM difference between the rotational speed of the Torque Converter and the Transmission Input Shaft.

What’s the color code for the Chrysler PT Cruiser?

Brilliant Black Pearl – color code: null, Cool Vanilla – color code: null, Black – color code: null are just some of the paint color codes that we offer in jars, pens, spray cans and more. Get your Chrysler PT Cruiser looking its best by selecting one of the touch up paint color options above.

Why is my PT Cruiser running rough?

While there are a variety of reasons your Chrysler PT Cruiser has a rough idle, the most common 3 are a vacuum leak, an issue with the spark plugs, or a problem with the ignition coil. 34%.

How do you reset check engine light on PT Cruiser?

Check the gas cap on your PT Cruiser to ensure it is tightened properly. Shack the cap lid and listen for a rattle, if one is present, replace it. Remove the cap and screw back on, allowing the cap to click only once. Reset the engine light manually by first opening the hood. Pull the release latch found underneath the the steering wheel co.

What is a Chrysler PT Cruiser?

The Chrysler PT Cruiser is a “retro”-styled station wagon built by Chrysler, a marque of DaimlerChrysler. It was introduced for 2001 and has become Chrysler’s entry-level vehicle (replacing the Plymouth Neon after the demise of the Plymouth marque), slotting below the Sebring in the lineup. It was designed as…

Where can I find the VIN code for a Chrysler PT Cruiser?

The odometer will go through 1111111 through 999999, then display the car’s serial number and some other, irrelevant information, then show the error codes starting with P. Note that this method may not work. It’s easier but not necessarily better. You can also get the codes using an OBDC III scan tool.

What happens when the timing belt fails on a Chrysler PT Cruiser?

Some engines are called interference engines and the pistons will bend the valves when a timing belt fails. 26 people found this helpful. Yep. tenspeed is right on. The piston will come up on a compression or an exhaust stroke and hit a valve that is not supposed to be open.

Author Image
Ruth Doyle