How do you change the ignition switch on a 1987 Chevy pickup?
How do you change the ignition switch on a 1987 Chevy pickup?
Unplug the wiring harness connected to your pickup’s ignition switch. Remove the two bolts holding the switch in place on the steering column with a socket wrench. Lift the ignition switch vertically away from the steering column, and discard it. Install a new ignition switch in your 1987 Chevrolet pickup by reversing the removal process entirely.
Where is the ignition key on a Chevy truck?
Since most Chevy trucks now use a transponder key, a special ignition cylinder has to be made for your truck. Remove the screws on the underside of the steering column cover. Pull the cover down. Push the punch pin up into the access hole under the ignition cylinder. Pry the ignition lock out of the steering column with a flat tip screwdriver.
What does the ignition cylinder do on a Chevy truck?
The ignition cylinder on a Chevy Truck allows the ignition switch to activate and send an electrical signal to the starter motor. The motor then starts the engine. However, when the ignition cylinder jams, you won’t be able to start your truck.
How do you remove an ignition switch from a truck?
The switch is square and has a large wiring harness connected to its back. Unplug the wiring harness connected to your pickup’s ignition switch. Remove the two bolts holding the switch in place on the steering column with a socket wrench. Lift the ignition switch vertically away from the steering column, and discard it.
How do you remove an ignition switch from a 1987 Chevy?
Remove the two bolts holding the switch in place on the steering column with a socket wrench. Lift the ignition switch vertically away from the steering column, and discard it. Install a new ignition switch in your 1987 Chevrolet pickup by reversing the removal process entirely.
What happens when the ignition switch fails on a 1987 pickup?
When you turn the key forward in your 1987 Pickup, the ignition switch tags the starter relay, which then tags your starter motor. When the ignition switch fails, it will tag neither the relay nor the starter, resulting with your engine not starting.
Where is the ignition pick up on a car?
The electronic ignition pickup is located in your ignition distributor. The ignition coil delivers voltage by triggering a spark to each cylinder as the ignition rotor spins inside the distributor cap. Like most electronic components, the ignition pick up can show symptoms of failure by misfiring intermittently, or it can fail all at once.
Can a damaged ignition switch stop a car from starting?
A damaged or defective ignition switch in your Chevrolet pickup will prevent the engine from starting. The ignition switch essentially plays a game of three-way tag. When you turn the key forward in your 1987 Pickup, the ignition switch tags the starter relay, which then tags your starter motor.
