How do you change the fuel pump in a Ford Ranger?

Lifting the bed is the easy way to change the pump: there is one caveat. If the tank is dirty you need to drop the tank and clean it out the old fashioned way. 1. Remove the fuel pressure relay and depressurize the system 2. Remove tailgate 6. TEAM LIFT bed off 7. Remove fuel pump fittings 8. Replace pump

How do you separate fuel lines in a Ford Ranger?

Slide the tool back to unseat the garter spring on the fitting, and pull back on the fuel line to separate them. This type of removal tool snaps over the line. Slide the tool back to unseat the garter spring on the fitting, and pull back on the fuel line to separate them. Be sure to check the O-rings for damage; replace them if necessary.

How do you change a bad fuel pump?

I lift the bed and change out the fuel pump that tested bad in a previous video. Lifting the bed is the easy way to change the pump: there is one caveat. If the tank is dirty you need to drop the tank and clean it out the old fashioned way. 1. Remove the fuel pressure relay and depressurize the system 2. Remove tailgate 6. TEAM LIFT bed off 7.

How to remove those pesky Ford fuel lines?

The quick disconnect lines for Ford (and some Chrysler) models can be difficult to get off. This guide will show you how to remove and reattach fuel lines. Please be careful when working with any kind of fuel system, wear gloves/safety goggles and keep sparks away! Loading…

How to remove fuel line fittings without fancy tools?

How To Remove Ford Fuel Line Fittings Without Fancy Tools! Quick Disconnect DIY – YouTube

How do you remove a fuel pump ring?

There will also be vertical tabs used to remove the ring. Tap the vertical tabs counterclockwise, using the screwdriver and hammer, to unlock the ring. Lift the fuel pump out of the fuel tank and discard the rubber O-ring that is located under the top of the fuel pump.

Can you change O2 sensor on Ford Ranger?

NEVER Change Another O2 Sensor Until You WATCH THIS! An error occurred while retrieving sharing information. Please try again later. Who Makes The Best Fuel Filters?

Can a fuel pump be replaced in a Ford Ranger?

How to replace a Ford Ranger fuel pump. This is how to diagnose, remove, and install a fuel pump in a Ford Ranger, Explorer, or Mazda B3000. You also need to replace your fuel filter when you replace the fuel pump in your truck. READ MORE FOR FUEL PUMPS & TOOL LINKS: Make sure that you purchase the highest quality fuel pump that you can afford!

NEVER Change Another O2 Sensor Until You WATCH THIS! An error occurred while retrieving sharing information. Please try again later. Who Makes The Best Fuel Filters?

How do you disconnect a fuel line in a Ford Ranger?

If the tool is not on hand, go onto step 2. Align the slot on the push connector disconnect tool with either tab on the retaining clip. Pull the line from the connector. 2) If the special clip tool is not available, use a pair of narrow 6-inch slip-jaw pliers with a jaw width of 0.2 in (5mm) or less.

How do you replace a fuel pump relay?

Remove the original fuel pump relay from the fifth slow from the right. Remove the replacement relay from the third slot from the right and insert it into original position in the fifth slot. Bring the original fuel pump relay to an auto part store and buy a replacement.

What happens if you break the fuel pump relay?

A broken fuel pump relay causes a malfunctioning pump, starving the engine of fuel. The engine may stutter, stall or not start at all. Luckily, you can test the fuel pump relay in a 1994 Ford Ranger without buying any additional parts, relays or special tools.

Can you replace the gas tank on a Ford Ranger?

Your Ford Ranger is ready for any situation, provided it has the gas it needs to get going. When your tank springs a leak or begins to muddy your gas with rust and sediment, AutoZone is ready with a replacement Ford Ranger fuel tank to get your truck back in the game.

What kind of gas does a Ford Ranger use?

When your tank springs a leak or begins to muddy your gas with rust and sediment, AutoZone is ready with a replacement Ford Ranger fuel tank to get your truck back in the game. Clean, unadulterated gasoline is what your engine needs to run its best.

Where is the fuel filter on a Ford Ranger?

In most cases, the fuel filter is located under the driver’s door along the frame rail. The line running to the filter from the fuel tank is the inlet line. Take the inlet line off by squeezing the quick connect fittings and pulling the line off the filter.

Why does my Ford Ranger have no spark?

Fuel pump turns on at KOEO but does not turn off after 1-2 seconds like normal. Appears to have no spark or injector pulse. The Check Engine light does NOT come on at any point when trying to start. SPARK: Looked for spark with inline spark test light and also old fashioned method – plug in wire held against good ground.

Where is the crank sensor on a Ford Ranger?

Pins 21 & 22 at the PCM connector go to the crank sensor. With the multimeter set to AC voltage I verified that the crank sensor produced an ac voltage signal between .4 and 2.0 volts when the engine was being cranked (per other threads).

Do you need a fuel pump for a Ford Ranger?

Driving a compact pick-up like your Ford Ranger provides you with multiple advantages, including the drivability of a car with the convenience of a truck bed. A sudden dip in performance and fuel economy is a sign you have problems with the fuel pump. Fortunately, purchasing a replacement Ford Ranger fuel pump is easy when you rely on AutoZone.

Can a faulty fuel pump leave you stranded?

Although a faulty fuel pump is eventually going to leave you stranded, early symptoms often include shuddering and jolting when you hit the gas. Don’t procrastinate on the repair job if you notice these tell-tale signs.

What kind of Camper can a Ford Ranger tow?

However, the all-new 2020 Ford Ranger can tow a lot of different campers. The all-new 2020 Ford Ranger can tow many different campers, including small fifth wheelers, medium fifth wheels, pop-up trailers, teardrop trailers, travel trailers, and airstreams.

What’s the difference between a Ranger and a super cab?

In its third iteration, the Ranger received only a mild visual update, with outer design being similar to the old version. Notable modifications were lower the hood line, redesigned fenders, and grille similar to the F-150 of that time. The biggest change was the Super Cab variant, which was the first truck in this segment to use rear-hinged doors.

Is the Ford Ranger a short bed truck?

When it comes to a truck with a short bed, there is no surprise as to why most people would think of the all-new 2020 Ford Ranger. The all-new 2020 Ford Ranger stands out amongst its competitors because of its durable frame and notable powertrain.

Where are the fuel pumps on a Ford Ranger?

Car & Truck Parts Air Intake & Fuel Delivery Fuel Pumps Fuel Pumps for Ford Ranger Skip to page navigation Filter Fuel Pumps for Ford Ranger Side Refine Panel Shop by Category Air Intake & Fuel Delivery Fuel Pumps Air Cleaner Assemblies Air Intake Systems Carburetors Carburetor Parts Chokes Fuel Inject.

What’s the name of the new Ford Ranger?

The 2020 Ford Ranger comes in three different models: the all-new 2020 Ford Ranger XL, the all-new 2020 Ford Ranger XLT, and lastly, the all-new 2020 Ford Ranger LARIAT. Please keep in mind that each model has different specifications and amenities.

When did the Ford Ranger Super Cab come out?

There were some upgrades to the Ford Ranger transmission in 1985 with the five-speed manual becoming the standard feature on trucks. Ford did not introduce major changes in the Ford Ranger design until 1986. During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style.

What are the parts for a 2000 Ford Ranger?

Front Replacement Control Arm Kit – for 2000 Ford Ranger 2.5L 153Cu. In. l4 GAS SOHC Naturally Aspirated – XL Standard Cab Pickup 2-Door 2.5L 153Cu. In. l4 GAS SOHC Naturally Aspirated Loading Reviews… Quality: Value Line – High quality automotive part with the highest cost savings. Loading Reviews…

Where to get a fuel pump replacement for a Ford Ranger?

Order a fuel pump replacement for Ford Ranger at AutoZone to prevent significant losses in overall vehicle performance and MPG. Trust our friendly and knowledgeable staff to provide advice on purchasing and installing Ranger fuel pumps that are perfect for your make and model.

How do you change the fuel line on a Ford Ranger?

After that,spray a little WD-40 into the line.Using a fuel line release tool,push the line towards the filter and push the release tool into the line.This will allow the tool to push the clip open.while holding tool tight,pull the fuel line back,it should slide off.Use a larger screw driver to pop the filter out of its bracket.

Where is the fuel tank plug on a Ford Ranger?

The gas tank will have a plug on the bottom of it. Locate and remove the straps holding the fuel tank, There should be two straps holding it up. You will remove four bolts. Lower the tank to the ground.

How do you remove a fuel pump from a tank?

Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise. Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips. Here is a typical fuel pump removed from the fuel tank.

Can you test the fuel pump on a Ford Explorer?

Thankfully, Ford has made it super easy to test the fuel pump on your 4.0L Explorer (4.0L Ranger, 4.0L Aerostar or 4.0L Mountaineer) and in this article I’ll show you how to do it. Contents of this tutorial: Symptoms Of A Bad Fuel Pump. FUEL PUMP TEST 1: Using Starting Fluid. FUEL PUMP TEST 2: Fuel Pressure Test With Gauge.

How do you change the fuel pump in a Ford Ranger?