How do you bypass the theft system on a 2003 Ford Ranger?

How do you bypass the theft system on a 2003 Ford Ranger?

The first thing You will need to do is put the key in the ignition cylinder and rotate it to run without starting the engine. After that rotate the key back to the off position. Do this eight times in a row and stop on the run position. Allow the security light on the dash to blink and then turn off.

How to relearn Ford Pats control function module?

Enter “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key to OFF and then RUN. 2 keys required. Cycle key 1 to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.

How do you program a Ford Pats key?

First step, place an unprogrammed key in the ignition. We got that in there so let’s hit continue. Operation is successful. Okay, now we’ll just going to cycle through and go to a different key to program in.

How to relearn Ford Pats code erase procedure?

Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. 2 keys required. Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.

How to relearn Pats ignition key code program?

Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.”

How to program new Pats key for Ford manually?

3.Remove the existing key and, within TEN seconds, insert a second working key and turn it to ON (RUN) and the back OFF. Ignition must be in ON for at least ONE second, but no more than TEN seconds.

How to run Ford Pats relearn procedure module?

Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.” Disconnect Tool and leave key in RUN for 20 seconds. 1 key required. Cycle key 1 to RUN, then OFF. Cycle new key to RUN. 2 keys required. Cycle key 1 to RUN, then OFF. Cycle key 2 to RUN, then OFF. Cycle new key to RUN. Cycle a key in ignition to RUN.

Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. 2 keys required. Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.

Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.”