How do you adjust shocks on Rancho rs9000xl?
How do you adjust shocks on Rancho rs9000xl?
Rancho RS9000, RS9000X or RS9000XL shocks have a small ride-adjustment knob fitted to their base. You simply turn the knob with your fingers. No special tools are needed, and you don’t need to remove the shock from the vehicle in order to make the adjustments. Usually it takes 60 seconds to go around and adjust all four units.
How do you install a Rancho electric shock?
Rancho Shock Installation Instructions. Pull out the old shock and then set the new shock in place. Insert the upper shock bolt into the bracket and shock bushing. Tighten the nut on the bolt by hand. Adjust the level of the shock to align the lower bolt hole. Insert the shock bolt into the hole and then hand tighten the nut on the bolt.
Is there a warranty on Rancho shock absorbers?
Rancho® only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho® shock absorbers will result in reduced handling and braking ability and voids warranty. Product specifications subject to change without notice. 248 Specifications
Can You soften the shocks on a Rancho?
With the Rancho adjustable shocks fitted, you can dial the units firmer to compensate to a reasonable degree. Or, if the vehicle’s springs are notably stiff, you can soften the shocks in a lot of circumstances, for a much more comfortable ride. (4) A combination of all the above.
Rancho RS9000, RS9000X or RS9000XL shocks have a small ride-adjustment knob fitted to their base. You simply turn the knob with your fingers. No special tools are needed, and you don’t need to remove the shock from the vehicle in order to make the adjustments. Usually it takes 60 seconds to go around and adjust all four units.
Rancho Shock Installation Instructions. Pull out the old shock and then set the new shock in place. Insert the upper shock bolt into the bracket and shock bushing. Tighten the nut on the bolt by hand. Adjust the level of the shock to align the lower bolt hole. Insert the shock bolt into the hole and then hand tighten the nut on the bolt.
How to install Rancho performance suspension part number?
Download the latest Rancho® Suspension installation info. Please enter the part number you wish to look up.
How big of a bolt do you need for a Rancho shock?
Tighten the upper and lower bolts with the torque wrench. The bolts should be tightened to at least 80 ft- lbs. Repeat steps 3 through 7 for the other shock. You do not need to raise the entire vehicle up off the ground to install a Rancho shock. The shock bolts may be rusty and require a bit of effort to remove.
