How do I stop my rear shock from spinning?
How do I stop my rear shock from spinning?
Step one: Remove the lower bolt that attaches the shock to the axle. From there, let the shock fully extend downward. This will create a cavity/clearance that will allow you to get a small set of vice grips in. This gave enough grip/bite to get the bolt off with minimal spinning of the piston.
How do I stop my shock shaft from spinning?
Regardless you could use some pliers and wrap the shaft with a small strip of mouse pad – this will protect the shaft from gouges and will allow you to keep the shaft from spinning when you tighten the top nut.
How to change rear shocks on Chevy truck?
Keep the floor jack near the lower shock mount and place the stands on position, cradling the axle. Before putting the vehicle’s weight on the stands, secure the stands once again. Step 5: Wear your safety glasses and slide under the truck to start the process of changing rear shocks. Remove the upper shock retaining bolt using the socket.
How do you remove a shock from a suspension?
Use a socket set or a nut splitter to disengage the nut that connects the shock to the suspension, and remove it from the bolt. If there isn’t enough room to operate the splitter, you can apply penetrating solvent.
How do you remove a shock retaining bolt?
Remove the upper shock retaining bolt using the socket. You can also use the threaded rod with a separate tool to stop the rode from spinning. Then, remove the bottom shock bolt and give it a few taps with a hammer. Step 6: When you are doing the whole process, protect the threads or use new hardware.
What’s the best way to replace struts on a car?
Struts can be difficult to replace, so it’s best to let a professional handle that job. 2. Purchase new shock absorbers. If you’re unsure what type of shock absorbers you need, speak to someone at your local auto parts store or an auto mechanic to be sure you buy the right shock absorbers or piston for your vehicle.
What to use to remove nuts from shocks?
Nuts on the shock bolts may be rusted and/or difficult to remove. Use some penetrating oil, such as PB B’laster, and give it some time to work to help loosen them. You can also use a nut splitter to help remove stubborn nuts. Locate the attaching/mounting hardware at the top of the shock.
Keep the floor jack near the lower shock mount and place the stands on position, cradling the axle. Before putting the vehicle’s weight on the stands, secure the stands once again. Step 5: Wear your safety glasses and slide under the truck to start the process of changing rear shocks. Remove the upper shock retaining bolt using the socket.
Use a socket set or a nut splitter to disengage the nut that connects the shock to the suspension, and remove it from the bolt. If there isn’t enough room to operate the splitter, you can apply penetrating solvent.
Remove the upper shock retaining bolt using the socket. You can also use the threaded rod with a separate tool to stop the rode from spinning. Then, remove the bottom shock bolt and give it a few taps with a hammer. Step 6: When you are doing the whole process, protect the threads or use new hardware.
