How do I reset my oil changed screen?
How do I reset my oil changed screen?
Hold the Reset Button and Turn the Key Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How is oil life calculated Ford?
How Ford’s Intelligent Oil-Life Monitor system works. The Ford’s IOLM meter is located on the information display on the dashboard, and will count down from 100% oil life to 0% oil life as you continue to drive the vehicle, at which point the computer will trigger a reminder for you to ‘change engine oil soon.
What oil does a 2005 Ford Explorer use?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
| Torque: | 10 ft/lbs (Oil Drain Plug) |
How to reset the oil change light on Ford Explorer?
Learn how to reset the oil change light on the Ford Explorer using these steps. Using the directional pad on the left side of the steering wheel, select “ Settings “. Select “ Oil Life “. Press and hold the “ OK ” button. Using the directional pad on the left side of the steering wheel, select “ Settings “. Choose “ Vehicle “.
Is it easy to change the oil in an explorer?
Pretty easy to do the oil change today. Oil filter access easy from the engine bay. Only 1871 miles and very dirty as others have mentioned. I wanted to get good full synthetic oil in before winter. Thanks everyone for your help and comments. Pretty easy to do the oil change today. Oil filter access easy from the engine bay.
How do I reset the oil change required message?
Press the “ Oil Change Reset ” button on the overhead Instrument panel for 5 seconds. After a brief countdown, the Oil Life will be reset. I hope this guide has helped you successfully reset the Oil Change Required message on your Ford Explorer.
Where is the oil life monitor on a Ford?
The Ford’s IOLM meter is located on the information display on the dashboard, and will count down from 100% oil life to 0% oil life as you continue to drive the vehicle, at which point the computer will trigger a reminder for you to ‘change engine oil soon.’ Around the 15% oil life threshold,…
How do you reset the oil life monitor?
Learn do this by following the directions below: Step 1: Press and release the ‘SETUP’ button on the steering wheel until you see the oil life indicator on the dashboard information display. Step 2: Press and hold the ‘INFO/RESET’ button on the steering wheel for two seconds and release it. The oil life monitor will be reset to 100%.
Where is the iolm monitor on a Ford?
The Ford’s IOLM meter is located on the information display on the dashboard, and will count down from 100% oil life to 0% oil life as you continue to drive the vehicle, at which point the computer will trigger a reminder for you to ‘change engine oil soon.’
What do I need to know about Ford oil change?
When your vehicle is ready for an oil change, Ford has a standard list of inspection for every servicing: Perform a multi-point inspection of the engine and other parts; perform changes or repairs as necessary Inspect the brake pads, shoes, rotors, drums, brake linings, hoses and parking brake for wear; change or repair as necessary
