How do I access my Thomson router settings?

Setup Internet Connection

Open a web browser (such as Internet Explorer, or Mozilla Firefox).
Type 192.168.
Click on the Thomson Gateway link on the left sidebar menu.
Click on Set Up to open the set-up wizard.
The configuration wizard will pop up.
Under Select a Service, select Routed PPP.

How do I access my modem settings Telstra?

For nbn™/ADSL/Velocity/Cable (with Adapter) modems – enter http://10.0.0.138 or http://telstra.gateway/ For Cable (without Adapter) modems – enter http://192.166.0.1 or http://telstra.gateway/

How do I configure my Telstra modem for NBN?

Plug in and connect your new setup

Connect the coaxial splitter to the cable port.
Screw the Telstra Cable Adaptor into the coaxial splitter.
Plug the nbn Connection Box into a power outlet.
Connect the nbn Connection Box to your Telstra Smart Modem™
Plug your Telstra Smart Modem™ into the power outlet.

How do I log into my Thomson modem?

Thomson Router Login Open your web browser of choice and type IP address of your Thomson router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.

How do I change the channel on my Thomson router?

Find the field named Channel Selection, normally the drop down box will show ‘Automatic’. Click on the down arrow at the end of the drop down box and select Manual. The Channel field will now show a drop down box. Click on the down arrow at the end of the drop down box and select new channel.

How do I get into my modem settings?

Access the modem’s configuration page. Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-Link modem in the address bar: http://192.168.1.1. This should open the login page for your modem’s configuration pages.

How do I change my modem settings?

How to Change Your SSID

Enter your router’s IP address into your favorite web browser.
Log in with the default username and password.
Click on Setup.
Choose Wireless Settings.
Type in your new SSID.
Save the new settings and wait for your router to restart.

How do I configure my NBN modem?

How do I configure a modem?

Make sure your property is NBN ready.
Make sure you’ve signed up for an NBN plan, and that it’s activated.
Make sure all your cables are plugged in right, and are firm in their slots.
Power up your modem, wait five to ten minutes.

How do I reset my Thomson router?

Use a paperclip, pen or pointed object to press into the reset pin hole on the back of the router. Keep the button pressed in for at least 7 seconds. When the power light goes red, release the button and wait until the power light turns green again.

How to check the BigPond modem settings?

Answered BigPond Modem settings…If you ever need to check your ‘BigPond’ ADSL modem internal settings, then the ‘magic’ number you need to type into the address bar is: http://10.0.0.138/ or for cable type in http://192.168.0.1/

How can I set up a Thomson tg782t modem?

You can actually setup the Thomson TG782T modem manually if you don’t have the installation disc. Just make sure you have a computer connected via Ethernet (or wifi) to the Thomson modem and access the modem interface page http://10.0.0.138/ . Go to Internet underneath Broadband Connection and update your account details.

Is the tg587n V3 BigPond modem compatible?

Re: BigPond Modem settings… The TG587n v3 does have the capacity (and ports) to connect to FTP, however the modem requires a specific firmware upgrade to unlock the WAN port (Firmware: 8.4.4.J). This firmware update does not have a direct link, and from what I’ve been advised, the modem will automatically update after a steady connection.

How can I connect my Thomson modem to my computer?

Just make sure you have a computer connected via Ethernet (or wifi) to the Thomson modem and access the modem interface page http://10.0.0.138/ . Go to Internet underneath Broadband Connection and update your account details. Hit connect once you’re done. Hope this helps.

How do I access my Thomson router settings?