How can I tell what rear end ratio I have?

The Axle Ratio is stamped on a Gear Ratio Tag on the axle cover. The stamped numbers on the left or right axle tube can also identify the axle. Chrysler Dodge differential gasket patterns can help you indentiy what rear end you have. 2000 – 2002 Front Axle Model Designation changes.

Where do you find the axle ratio on a Dodge?

How to determine the gear ratio of a Dodge Ram?

I am in the market to by a 14+ Laramie Longhorn but I want to make sure that the truck has 3.92 gears in it. Does RAM include this distinction in their VIN numbers so I can exclude trucks that I see listed that do not have the proper gears that I want? Thanks RAMSESSES likes this. Click the link below and go to “Equipment Listing” on the left.

What kind of rear end does a Dodge have?

The stamped numbers on the left or right axle tube can also identify the axle. Chrysler Dodge differential gasket patterns can help you indentiy what rear end you have. 2000 – 2002 Front Axle Model Designation changes.

Where is the rear axle tag on a Dodge Ram?

Just enter your vin# The tag on the rear axle wears off pretty quick, but sometimes you get lucky. Another place to find it is on the transfer case, if you have a 4×4. It’ll be on the back, underside of the case. Here is a pic of the one from my 2013 before it was totaled.

How do you find out your diff gear ratio?

At 10 wheels spins the masking tape on both the tyre and the driveshaft should land in the same original postion as the starting point. Usually there is a sticker on the diff housing that says what the ratio is but if in doubt, this is the best way to know exactly what gears you have.

How to check your gear ratio without removing the cover?

One way to determine your gear ratio is to check the tag attached to the front differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers would indicate the stock axle ratio.

What’s the axle ratio on a GM transaxle?

GM RPO Codes – Factory Identification Labels and Interpretation RPO Code Description Ratio G11 Transaxle Final Drive 2.56 G44 Axle Rear 3.07 G72 Axle Rear 2.14 G75 Axle Rear 3.62

How to find axle ratio on a Ford Raptor?

F150 Truck Axle Code Guide; 3.15 = 15 or L5: 3.31 = 27 or L3: 3.55 = 19, H9 or L9: 3.73 = 26, B6 or L6: 4.10 = L4

How do I determine my axle gear ratio?

When attempting to find the axle ratio of an unknown gear set-up, it is possible to count the teeth on both the ring and pinion gears and divide the number of teeth on the ring gear by the number of teeth on the pinion gear. The result is the final gear ratio of the axle.

How do you calculate rear end ratio?

Step 1 How to Calculate Your Rear End Ratio. Here is the formula to calculate rear end ratio: =(60*RPM)/(Tire Size*Xmission Final Ratio*Road Speed) Here’s what you need to know: Your Tire size in a number represented as “revolutions per mile”.

How do I identify my rear axle?

Locate the axle identification tag on the rear axle on the differential cover bolt in the 12 o’clock position. The number in the lower left-hand corner is the gear ratio, for example, “3.08.”. If the number has an “L” in it, for example, “3L08,” it is a limited-slip axle. Locate the number immediately to the right of the axle ratio.

How do I find out the axle ratio?

How to Calculate Axle Ratio. In order to calculate axle ratio, you would count the number of teeth on the ring gear as well as the number of teeth on the pinion. Divide the number of teeth on the ring gear by the number of teeth on the pinion in order to determine the axle ratio of a truck.

How can I tell what rear end ratio I have?