How big are the torque bolts on a Ford Mustang?

Ford Engine Bolt Torque Chart Fastener Type Torque Spec Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 8-10 ft-lbs. Harmonic damper bolts 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs.

What should the torque be on an ARP bolt?

If you use after-market performance bolts like ARP’s, you should follow the recommended torque specifications. 40-45 ft-lbs. (45-50 ft-lbs. For Boss 351C) 105 ft-lbs. (125 ft-lbs. For Boss 351C) 40-45 ft-lbs. (53-58 ft-lbs. For 406 and 427) 80-90 ft-lbs. (100-110 ft-lbs. For 1963-67 427)

Where can I find the latest torque specs?

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

What are the torque specs for a Ford engine?

Ford Engine Bolt Torque Chart Fastener Type Torque Spec Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs.

How big of a head do I need for a small block Ford?

Begin with 15 ftlbs, then 20, and then 22 ft-lbs. Check your torque readings on all bolts. Roll the engine over and prepare for oil pan installation. First, clean up gasket mating surfaces with a razor blade as shown.

How to do torque specs on Ford small block rebuild?

You can use the social sharing buttons to the left, or copy and paste the website link: https://www.diyford.com/ford-small-block-rebuild-torque-specs-sequences-alignment/ Please refer to this diagram when aligning ring gaps on your pistons. See page 107 for more details.

Where to place head gaskets on small block Ford?

“FRONT” means FRONT with small block Ford head gaskets. Coolant passages must be positioned at the rear of the block for proper coolant flow. We suggest Fel-Pro Print-O-Seal head gaskets for best results. Cylinder heads are installed next. Make sure the block dowels are installed first.

What are the torque specs on a Ford Big Block?

Ford Big Block (FE Series) Torque Specs Fastener Type Torque Specs Harmonic Damper Bolt 70-90 ft.-lbs. Flywheel/Flexplate Bolts 75-85 ft.-lbs. Pressure Plate Bolts 35 ft.-lbs. Front Cover Bolts 12-15 ft.-lbs.

What should the torque be on a U-bolt?

U-Bolts that have been well lubricated with an anti-seize compound will have a torque range between plated and unplated values. All the above values are general guidelines. The OEM Service Manual on specific models always takes precedence over values shown. Snug U-Bolts in the seqence shown. Tighten completely in the sequence shown. MAX. TORQUE

What are the different types of torque converter bolts?

6.78 3800 II – Torque Converter Cover Bolts Type: Bolt 74 888 100.33 3800 II – A/C Compressor Mounting Bolts – FRONT NUTS Type: 59 708 79.99 3800 II – A/C Compressor Mounting Bolts – LOWER BOLT Type: Bolt 23 276 31.18 3800 II – A/C Compressor Mounting Bolts – REAR BRACKET Type: Bolt 36 432 48.81 3800 II – A/C Compressor Mounting Bolts – UPPER BOLT

What are the torque specifications for a Ford Fiesta?

FORD (IMPORTS) APPLICATION FT-LBS / ( N-m) AXLE SHAFT FLANGE BOLTS 28-32 (38-43) AXLE SPINDLE NUT FIESTA 150-175 (205-235) ALL OTHERS 145 (197) BALL JOINT CLAMP BOLT 36 (49) LOWER CONTROL ARM PIVOT BOLT 30-33 (41-51) STABILIZER BAR BOLT FESTIVA 40-50 (54-68) TRACER 10-13 (14-18) STRUT-TO-KNUCKLE BOLTS

What should head torque be on Ford 3.8?

Loosen the long bolts to between 29 and 37 foot-lbs. of torque and the short bolts to between 7 and 15 foot-lbs. of torque. Then, tighten each bolt an additional 90 degrees. The last two steps–the loosening and then the 90 degree tightening–should both be performed on each bolt before moving to the next bolt.

What are the torque specs for a boss 351C?

If you use after-market performance bolts like ARP’s, you should follow the recommended torque specifications. 351W Torque Spec. 351C, 351M Torque Spec. 40-45 ft-lbs. (45-50 ft-lbs. For Boss 351C) 105 ft-lbs. (125 ft-lbs. For Boss 351C)

What are the torque specs on a Ford Windsor?

Ford Windsor Torque Specs Fastener Type Torque Specs Intake Manifold Bolts 23-25 ft.-lbs. Oil Pump Bolt 23-28 ft.-lbs. Cam Bolts 40-45 ft.-lbs. Cam Thrust Plate Bolts 8-10 ft.-lbs.

How big are the bolts on a Boss 302 Mustang?

Main cap bolts. 60-70 ft-lbs. Outer 2 bolts of main cap bolts. 35-40 ft-lbs.(for 4 bolt main bearing caps only ) Connecting rod bolts. (40-45 ft-lbs. for 289 HP & Boss 302) Cylinder head bolts. 65-72 ft-lbs.

How often can torque to yeild bolts be used?

Those Torque To Yeild Bolts Can Only Be Used Once And Do Not Have The Clamping Force Of A Stud!!! Also To Get More Horse Power You Really Have To Change Cams..

What kind of torque does a 3.8L Mustang have?

I just purchased a 2001 Mustang V6 3.8L used. It seems to be a little sluggish at times. Like on general takeoff. Then getting up to 40 MPH, seems like a struggle. Even shakes a lil bit getting up to 40 MPH…Could that mean a Tune Up is needed?

Those Torque To Yeild Bolts Can Only Be Used Once And Do Not Have The Clamping Force Of A Stud!!! Also To Get More Horse Power You Really Have To Change Cams..

What kind of oil does a Ford Mustang use?

Hay you could also get some under-drive pullys, cold air intake from Ebay from $50-$70. And next time you change your oil use Royal Purple oil and it is proven in the Dyno that when used together with there transmission oil you could get 7-11 HP gains. Hay you could also get some under-drive pullys, cold air intake from Ebay from $50-$70.

What kind of bolts do I need for a 1989 GT?

The numbers with length and location that I’ve provided above were for a 1989 GT with A/C, Power Steering, Stock Alternator, and the Air Pump in place. Bolt only for position #8 is correct for 1989. However bolt and stud combo is correct for 1990. Please support us by disabling AdBlocker on our website.

What are torque specs for small block Chevy?

These specs are for stock-type bolts with light engine oil applied to the threads and the underside of the bolt head. Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use aftermarket performance bolts like ARP’s, you should follow the recommended torque specifications.

How much torque does a Ford 5.4L 330ci have?

21.69 Mod OHC – STEP 5 (REP): Side Bolts Type: Bolt Cylinder Head To Engine Block 30 360 40.67 Modular OHC – 3 Steps: 30FtLbs; +90deg; +90deg Type: Bolt 11 132 14.91 Modular OHC – Oil Drain Plug

What are the camshaft caps torque specs on a Ford Edge?

In this video we will show you the camshaft caps torque specs on Ford with 3.5 ( it may work for the 3.7 v6 engine as well but double check with your manual). The same engine has been used on many Lincoln cars as well. If you need to know the camshaft caps torque specs on the Ford Lincoln Engine 3.5 this is the video for you.

How much torque do I need for aluminum intake manifold?

Then, using the same torque sequence, tighten all 12 bolts to 18 lb-ft for aluminum heads. Repeat multiple times in sequence until all bolts reach proper torque. Note:You will find that the end bolts reach their final torque value sooner than the center bolts. For iron heads, the final torque value is 22-24 lb-ft. Title

What are the torque specs of a Ford 2.0L?

15 180 20 SPI SOHC – Camshaft Position Sensor. Type: 21 252 29 SPI SOHC Oil Drain Plug to Oil Pan. Type: 33 396 45 SPI SOHC – MTX 75 and MTX 285 Manual Transaxle drain plug. Type:

How big are the torque bolts on a Ford Mustang?