Can you replace more than one tire on a 4WD vehicle?
Can you replace more than one tire on a 4WD vehicle?
In some cases, the vehicle manufacturer may specifically advise against replacing less than all four tires. Always check and follow the recommendations in the vehicle owner’s manual. For 4WD and AWD vehicles, even small differences in outside diameter may cause drive-train damage or mechanical malfunction.
Can a mismatched tire cause a differential to fail?
If you use mismatched tires (tires of different size, tread design or tread depth), you may be forcing the differentials to operate at all times. This will lead to excessive heat and unnecessary wear on the differential, and may cause early failure.
Why do I need a differential on my car?
Most differential systems are designed to allow short-term differences in wheel speeds when the vehicle turns a corner or spins a tire. If you use mismatched tires (tires of different size, tread design or tread depth), you may be forcing the differentials to operate at all times.
Do you have to have the same tread pattern on all your tires?
The tread pattern and tire type that your tires have should be similar. That is, whether they’re front or rear tires, you want all your tires to be the same model and have the same or similar tread condition.
How do you change a front wheel axle?
Remove the knuckle assembly from the car and prepare it for the press. Step 6. Set the knuckle assemble on the press and suspend it safely, remove the center hub, starting from the back of the bearing, and only press out the center of the bearing. Step 7. Flip it over and remove the snap ring or retaining ring from the knuckle assembly.
What does it mean when your Ford Explorer wheel is not wiggling?
Jack and Wiggle – With your Explorer on jack stands, you’ll want to look and see if the wheel is wiggling at the bearing. If it is, that’s proof positive that you need a new wheel bearing. If it does not wiggle, that does not automatically mean the wheel bearing is good.
How do you change the bearing on a front wheel?
Using a high speed cut off wheel, make a slice in the center race still pressed on the hub. Use a large chisel to crack the inner race at the slice. Support the bottom of the knuckle assemble and press the new bearing in. Make sure everything is straight and level for easy installation.
How to replace front wheel bearings with MG Midget?
Comprehensive article about MG Midget & Austin-Healey Sprite front wheel bearing replacement, shimming, comparison to MGB bearings and technical drawings.
