Easy tips

Can you install a new radio in a Chevy Express?

Can you install a new radio in a Chevy Express?

Most new models will come equipped with a factory-installed radio. If you’re interested in installing a new after-market radio, the first step is to remove the existing radio. Then you’ll have a spot to install a new radio into, as well as access to all the necessary wiring.

Where is the radio located in a Chevy Van?

Set the parking brake, and turn off the ignition to the van. Pull away the small trim-panel that’s located underneath the steering column. Simply grab the backside of the panel and pull firmly away from the dashboard. Pull around the edges of the instrument trim panel that surrounds the factory radio and instrument panels.

What do I need to replace the factory radio?

Replacing the factory radio requires a dash kit and a wiring harness adapter. Because your vehicle’s warning chime is built into the factory radio, you’ll need to purchase an adapter that retains the factory warning chime and provides a switched 12-volt power source for your new radio.

Where are the speakers on a Chevy Express?

The door speakers are comparitively easy to reach and replace (Crutchfield Research Photo) Your Express or Savana will have speakers in the front doors and, if so equipped from the factory, the rear cargo doors. Some models will also have a couple of speakers housed inside a rear roof trim panel.

How to remove the radio from a Chevy Express van?

When the radio is clear of the dashboard, unplug the connectors on the back and you’ve completed removing the radio. Based in Virginia, Nichole Liandi has been a freelance writer since 2005. Her articles have appeared on various print and online publications.

How do you remove a radio from a car?

Push down on the two white plastic tabs on either side of the factory radio and pull the radio towards you. The radio will slide out from the cavity in the dash. When the radio is clear of the dashboard, unplug the connectors on the back and you’ve completed removing the radio.

How do you unlock the radio on a Chevy?

How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Step 3: Press the AM/FM button. Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.

What kind of radio does an Express Savana use?

The Express/Savana twins have always been available in a variety of configurations and with a variety of options. From a simple, basic cargo van to a posh multi-passenger people mover, the van you needed was just an order sheet away. Factory radio options included the base AM/FM radio and a navigation receiver.

Most new models will come equipped with a factory-installed radio. If you’re interested in installing a new after-market radio, the first step is to remove the existing radio. Then you’ll have a spot to install a new radio into, as well as access to all the necessary wiring.

Set the parking brake, and turn off the ignition to the van. Pull away the small trim-panel that’s located underneath the steering column. Simply grab the backside of the panel and pull firmly away from the dashboard. Pull around the edges of the instrument trim panel that surrounds the factory radio and instrument panels.

Author Image
Ruth Doyle