Can a Triton timing set replace an oil pump?
Can a Triton timing set replace an oil pump?
Learn More. 5.4L Triton timing set, replace oil pump? Discussion in ‘ 3rd Gen – 2007 – 2017 ‘ started by JExpedition07, Oct 2, 2019 . My 5.4 3V is getting the startup rattle.
Can you spin up an oil pump with timing belt on?
With the timing belt on you cannot spin up the oil pump gears. So here is an alternative method suggested to me by RRE. – Oil hand pump (attaches to the opening of the 1qt/5qt/1gal oil bottle).
Do you need to replace the oil pump on a 5.4 3V?
My 5.4 3V is getting the startup rattle. I’m planning on ordering new OEM camphasers, chains, guides, tensioners and cleaning out the oil pan plus pickup. Is there any real need to replace the oem oil pump? I’m not seeing it as very important since my primary oil loss is coming from the leaky tensioner and not the pump.
What should the oil pressure be on a Triton V8?
On the 5.4L 3-valve Triton V8 (and far less often on the 4.6L), the pump just doesn’t last and the resulting failures can be very expensive. In almost every case, oil pressure is fine cold, and is okay hot except at idle. Codes and symptoms often include some or all of the following: P0012/P0022. P0340/P0345.
Learn More. 5.4L Triton timing set, replace oil pump? Discussion in ‘ 3rd Gen – 2007 – 2017 ‘ started by JExpedition07, Oct 2, 2019 . My 5.4 3V is getting the startup rattle.
How to install oil pump on Ford 5.4L 3V?
Solves the low oil pressure on the Ford 5.4L 3V. Installed this pump when doing Phasers and timing chains. Took ten minutes to install this pump once the chains were removed. Replaced all timing components on my 2010 F150 3v 5.4, figured it would be a good idea to drop a new oil pump in while I had the front cover off.
Do you need priming for M360 oil pump?
On start up after new parts had been installed you could hear that the pump did not need priming as the engine did a minor ticking sound for about 1 second and disappeared. However you’re gonna want to leave on for about 5 seconds and let it sit for about a minute. Repeat the process about 5 times and you should no longer have any air trapped.
Is it bad to change your oil pump?
The question is whether the oil pump is bad or not. If it’s bad and you don’t change it, you’re screwed. But it’s probably not bad. I think most people change them on the small chance it is and for added protection of the improved pump and the hope they’ll never, ever have to go in there again.
