Easy tips

Can a Silverado run without the ignition switch?

Can a Silverado run without the ignition switch?

Silverado stayed running without the key in the ignition switch Hopefully someone can help me out here? I have a 2008 silverado crew cab which i am recently having problems with.

What are the symptoms of a bad ignition switch?

Which parts get that power depends on where you turn the switch after you insert the car key. These are the most common problems associated with a faulty ignition switch: Engine dies: This is one of the most common symptoms of a bad ignition switch.

Can you turn off the engine without the ignition?

The ignition in my 98 has been acting weird for some time. I can pull the key from the ignition while the truck is running. If you are not careful, you can turn the engine off without putting the key in the off position. The key will come out in the accessory position and you can turn the ignition with no key and start the truck.

What to do if your ignition cylinder is worn out?

How To Fix It: Fortunately, this is an easy fix. Just turn the wheel back and forth until the ignition cylinder is freed. It’s a fact of life that mechanical things tend to wear out, and the same goes for mechanical keys and key cylinders used in your car’s ignition system.

Silverado stayed running without the key in the ignition switch Hopefully someone can help me out here? I have a 2008 silverado crew cab which i am recently having problems with.

Why does my Silverado keep running without the key?

SILVERADO3 ill take a look i really dont like to mess wit the truck being that that seem to be like an electrical problem dont want to mess anything up more than what already is but doesnt hurt to try thanks ill let you know what i come up with.

Are there any problems with the Chevy 6.0 engine?

If you are a user of Chevrolet 6.0 Vortec Engine, you must have the ideas of common Chevy 6.0 Engine Problems. In any vehicle, the engine is regarded as the most essential component. The Chevy 6.0 engine, similar to any other component, might develop some technical problems – which can make owners look for ways on how to fix them.

What kind of engine is in a Chevy Silverado?

General Motors 6.0L Vortec 6000 or V-8 since the 2010 model year is the gas engine choice to suit heavy-duty applications. This included the GMC Sierra and Chevrolet Silverado.

What kind of engine does a 2003 Silverado have?

Here’s the kicker…..I put the new one in and the truck started right up and we thought it was fixed, my son drove the truck and it ran fine, but when he returned home, it wouldn’t keep running after he would try to start it again, no matter how many times we tried.

Why does my Chevy Silverado lose engine power?

Keep reading to find at least one possible answer to “Why is my Chevy Silverado losing power?” Read More: How Can You Tell If Your Pickup Is Overloaded? If your GM truck occasionally loses the ability to accelerate and warns you of reduced engine power, that could be caused by a faulty throttle body.

Why is the TPS on my Chevy Silverado 1500 not working?

The throttle position sensor (TPS) on the Chevrolet Silverado 1500 is notorious for failure which causes: This issue is related to the throttle position sensor, and can be caused by faulty wiring to the TPS, bad connection at the TPS, or a failed TPS.

How does retained power work on a Silverado?

This feature is called “Retained Power” and opening the door will turn it off. This retained power thing is done with a couple of different methods. The older trucks use relays, the newer trucks are computer controlled.

Can you remove the key from a Silverado truck?

The truck is a 2013, V6, short bed. Thanks for any help! If I hit remote start and remove the key, yes. Just on its own, no.

Why does the engine stay running with the key out?

Switch key to the off position and pull out, radio and stuff stays on as normal until door opens then shuts off. Every once in a while the engine will stay running along with all the other RAP features. It’s not normal. Sounds like you have a faulty ignition switch. I’d get it looked at under warranty…since you have a 2013.

SILVERADO3 ill take a look i really dont like to mess wit the truck being that that seem to be like an electrical problem dont want to mess anything up more than what already is but doesnt hurt to try thanks ill let you know what i come up with.

What happens when you say gas in Chevy Silverado?

When you say “gas” the security system shuts off fuel to the injectors.Turn the key to the “On” position in the Silverado without turning over. Let the vehicle sit for 10 minutes, leaving the key in the “On” position. Some Passlock systems will relearn the codes after this amount of time. Try to start the vehicle.

The truck is a 2013, V6, short bed. Thanks for any help! If I hit remote start and remove the key, yes. Just on its own, no.

How do you reset the PassLock on a 1998 Chevy truck?

Turn your key clockwise to crank the ignition. Wait for your truck to start, which confirms that you have successfully reset the passlock on your ’98 Chevy truck. Based in Chicago, Kenyonda Bradley has been writing for online publications since 2008.

Is there a way to unlock a car door without a key?

On older model cars with a specific style outer handle, like in the screenshot below, you can potentially unlock the door from the outside using nothing but the antenna from your car. Just unscrew the antenna, carefully maneuver it up through the inside of the door handle, and move it around until the lock starts jiggling.

How does the PassLock work on a 1998 Chevy truck?

Most ’98 Chevy trucks came equipped with a General Motors passlock security feature that cuts the fuel supply to the engine if a key that’s incompatible with the system is inserted into the ignition. Once the theft-deterrent security feature has been activated on your ’98 Chevy truck, you will have to reset the passlock to start the engine.

What to do if you can’t get your car keys out?

Try pulling the keys out of the ignition with the wire. If you can get the keys in your hand this way, you`re set. But, if you can only just get the keys out of the ignition, try to move the lock button to unlock after you get them out of the ignition. Well, then it looks like you have no choice but to call OnStar or a locksmith.

What should I do if my Silverado engine dies?

Update as of today: 1) the truck hasn’t started and kept running since last week. It only starts right up, then dies immediately. 2) I got a fuel pressure tester and the pressure is at 53 with key on, and maintains pressure when it starts (then dies).

Author Image
Ruth Doyle