Can a GMC Sierra run without a fuel pump?

Without gas your Sierra will not run at all. With that in mind, most of the symptoms of a bad fuel pump revolve around the vehicle stalling out or not running at all. In modern fuel injected vehicles, the fuel pump sits right in the fuel tank and “pushes” the gasoline to the fuel rail (s).

What was the name of the 1989 GMC Suburban?

R2500 SUBURBAN the USACanada R3500 PICKUP the USACanada S15 JIMMY the USACanada S15 PICKUP the USACanada SAFARI the USACanada TOPKICK the USACanada

How to test the fuel pump on a Chevy Silverado?

All of the following fuel pressure test gauge kits will help test the fuel pump on your Chevrolet Silverado (Suburban, Tahoe) and GMC Sierra (Yukon, Yukon XL): As I mentioned at the beginning, testing the fuel pump simply involves connecting the fuel pressure test gauge to the fuel system.

Where is the fuel pump on a GM Truck?

As you’re already aware, the throttle body fuel injection system on your 1987 to 1995 4.3L, 5.0L, or 5.7L pickup (or SUV) uses a low pressure (12 PSI) electric fuel pump located in the gas tank. And although GM did not include a Schrader valve to which you could connect a fuel pressure gauge, it can be tested with one to find out if the fuel …

How to troubleshoot fuel pump in GM 4.3L?

Once the intake air duct is back on the throttle body, have your assistant, inside the vehicle, crank the engine. 1.) The engine will start momentarily and after a few seconds will die. 2.) The engine will only crank but not start at all. 3.) The engine will start and stay running. OK, let’s find out what your results mean:

What to do if your fuel pump is not working?

So if your vehicle isn’t starting and you suspect a fuel pump problem, here are some steps to follow to confirm your suspicions. Another ‘quick’ test is to bang on the fuel tank and then try and start the engine. Sometimes this works, just don’t bang too hard, you could damage something.

What does a bad fuel pump sound like?

A priming fuel pump sounds like a high-pitched whine for a few seconds and can be heard with a sharp engine right after the ignition key is turned, but before the starter is engaged. The symptoms of a bad fuel pump match a lot of other common problems that can occur in the GMC Sierra.

How to check no fuel condition on GM 4.3L?

I’ve also included how to check a no fuel condition with starting fluid (although this is not the most effective way to test the fuel pump). It’s been my experience that misdiagnosing a bad fuel pump is a common occurrence on the 4.3L, 5.0L, 5.7L GM vehicles with the ‘Spider’ fuel injector assembly.

What happens if your fuel pump is failing?

The fuel pump feeds fuel to the engine at a reliable rate; without this pump, your fuel would just sit in your tank, useless and inert. If you’re attentive, you can catch the symptoms of a failing fuel pump and have it repaired or replaced before it leaves you stranded on the side of the road.

Why does my GMC Sierra suddenly stop running?

Truck suddenly stops running, acting like it’s out of fuel. There is fuel in the gas tank and, I can hear the fuel pump when I turn the ignition on. Is there a fuse, or relay that is maybe causing this to happen?

What does the ECM play in giving the fuel pump power to turn on?

What role does the ecm play in giving the fuel pump power to turn on? hear the fuel pump activate. jog the start position,should run 3 or4 seconds,or get under the hood turn key on and pull the relay jog it on off should feel it click and maby youll hear the pump,

How to check for a faulty fuel pump?

THIS WILL POWER THE PUMP TO RUN AND CHECK FOR A FAULTY FUEL PUMP. 3. NEXT, CHECK FOR FUEL PUMP SIGNAL AT THE FUEL SYSTEM CONTROL MODULE. 4. FIND THE DARK GREEN/WHITE WIRE IN PIN13. WITH A TEST LIGHT CONNECTED TO THAT WIRE, TURN THE KEY TO THE RUN POSITION.

How to check fuel pump signal in gmflash?

1. CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND) 2. CONNECT PIN32 (RD/WH BATT + ) TO PIN47 (GY FUEL PUMP 12+) THIS WILL POWER THE PUMP TO RUN AND CHECK FOR A FAULTY FUEL PUMP. 3. NEXT, CHECK FOR FUEL PUMP SIGNAL AT THE FUEL SYSTEM CONTROL MODULE. 4. FIND THE DARK GREEN/WHITE WIRE IN PIN13.

Is there an ECM signal to the fuel pump relay?

The fuel pump relay works as it should. I always have power to Pin 30. I believe the ECM tells the relay to work via the green/black wire to Pin 85. This should happen for 2 seconds when the key is turned on. I have tested this when the issue is occurring and have confirmed that no signal is being sent from the ECM.

Is there no power to the fuel pump?

No power to the fuel pump and the fuel relay is not getti… Q: No power to the fuel pump and the fuel relay is not getting power. My car has 190000 miles.

Why is the fuel pump and relay not working?

The ignition circuit, which includes the ignition switch, controls power to many components, including the fuel pump and relay. If there is an issue with the switch or the circuit, perhaps a wiring problem, then power to the fuel system may be cut off.

What to do if your fuel pump wont start?

For future reference, I had this same problem when replacing the fuel pump on my 2002 s10 4.3L. Searched forever for an answer. It turns out that in order to remove the bed of the truck, you must disconnect the ground for the fuel pump, which attaches in the rear on the drivers side.

What are the symptoms of a bad fuel pump?

Also, the symptoms are almost exactly the same as bad/clogged fuel filter. Here are the most common symptoms of a bad fuel pump in your GMC Sierra: One of the most common signs that a fuel pump is going bad is a whining sound. The whining sound can indicate that the fuel pump is going out before there are any performance based issues.

Where does the gas go after a fuel pump replacement?

IT SAID GRAY FROM MY OLD HARNESS GOES TO THE SMALL BLACK WIRE TO NEW HARNESS WHICH WAS WRONG !! SO WHEN I REWIRED IT GRAY TO GRAY ! IT PUMPED GAS RIGHT THRU THE FUEL LINE GOING TO THE FUEL FILTER LINE RIGHT AWAY !!

How to install new GM wire harness on fuel pump module?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: WfYJuntPOgNiQAf9)

Why does my son’s GMC Sonoma not start?

I have a huge favor and I’m stuck my son has a 2003 gmc Sonoma pulled into our driveway went to start it back up it would not start checked everything and it seem to be the fuel pump so we purchased a new fuel pump and we still can’t get it to start we have replaced the control module and it still won’t start any buddy have any ideas

Is there a fuel problem with cranks but wont start?

yes unless you can get your hands on a lift and drop it out that would be much easier. If its the first time its been changed it will prob be a bit a of a job. Especially if you drop it and u have a lot in the tank. And when your removing the actual pump be real careful nothing falls inside or u will have bigger problems. Re: Cranks but wont start.

What should I do if my fuel pump is not working?

A clicking noise can be heard from each injector when they are working properly. I would recommend having a technician from YourMechanic try to start your vehicle with starter fluid. This should give the engine enough fuel to run long enough to see if the injectors are working correctly.

What happens if crankshaft sensor fails GM 4.8L?

If the crankshaft position (CKP) sensor fails, in your 4.8L, 5.3L or 6.0L GM vehicle, it’s not gonna’ start. In this article, I’ll show you how to test it using a multimeter (in Volts DC mode).

Why does my GMC Sierra have a bad fuel pump?

If you get P0420 or P0430 trouble codes with a scanner, it very well may be the catalytic converter causing these symptoms. One of the best indicators of a clogged fuel pump is going to be that the your Sierra is difficult to start. This because there’s not enough fuel pressure to properly atomize the fuel as it enters the combustion chamber.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

What can I do if my fuel pump is not working?

The engine module is what powers the relay for the pump. Check them with the key on. You can check fuses while they are in the fuse box. There are 2 metal tips on each fuse to touch with a test light or a volt meter. Check these and let me know. I will be back on tomorrow after noon.

If the crankshaft position (CKP) sensor fails, in your 4.8L, 5.3L or 6.0L GM vehicle, it’s not gonna’ start. In this article, I’ll show you how to test it using a multimeter (in Volts DC mode).

What’s the life of a Chevy fuel pump?

It’s happened to me more then once and I’ve read about it on auto repair forums. The original Chevy pump motor has a life expectancy of about 15-20 years. Running the vehicle out of fuel, which will actually run the pump in a dry state can shorten the expected life span.

What should fuel pressure be on GM 4.3L Vortec?

You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 4.3L, 5.0L, 5.7L) (at: autotecnico-online.com ). The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start.

What to do if your Chevy fuel pump fails?

Chevrolet fuel pump failures are a common and growing problem. If you have a fuel pump harness connector that looks like the flat one on the right or the square one at the bottom, then consider replacing it when replacing the pump. More details about this are below, but you might want to download your Chevy manual to help.

Do you have to fill the gas tank when installing a new fuel pump?

Having the gas tank at least half-filled is important when you are installing a new fuel pump. Checking these issues is a great way to ensure that the problem is being properly addressed.

How to remove a fuel pump from a truck?

Basic instructions on how to tip your bed and remove your fuel pump and sender assembly, replacement of the fuel pump from the sender unit and putting it back into the tank with gasket o-ring and lock ring. I also show video of the bolt hole locations on my short bed frame. Loading…

How can I tell if my fuel pump relay is faulty?

2. Engine does not start. Another symptom of a faulty fuel pump relay is an engine that does not start. If the fuel pump relay fails the fuel pump will be left without power. The engine may still crank when the key is turned, however it will not be able to start due to lack of fuel.

What should I do if my fuel pump does not work?

After mechanic replaced… After mechanic replaced fuel pump gas gauge does not work. Took my truck to mechanic for routine maintenance and he replaced the fuel pump. After I got the truck back and filled the gas tank I noticed the fuel gauge wasn’t reading correctly.

Is there a fuel pump relay on a Silverado?

My plan to clean the fuel injectors on my 2008 Silverado LS 4.8L V8 came to an abrupt halt when I was unable to disable the fuel pump relay because it is missing from the spot where it should be located according to the schematic in the owner’s manual. Does anyone have any ideas on this?

Where does the fuel pump go in a car?

In modern fuel injected vehicles, the fuel pump sits right in the fuel tank and “pushes” the gasoline to the fuel rail (s). It is in the fuel tank because “pushing” fuel to the fuel rail is easier than “pulling” the fuel, which is what an inline pump would do.

How can I tell if my fuel pump is working?

The only way to truly tell is to place a fuel pressure gauge on both sides of the line and get a reading from both. If your car isn’t starting at all, and you hear the fuel pump prime that is usually a good indication that the pump is working to some capacity.

When to replace the fuel pump on a Chevy Silverado?

If your Chevrolet Silverado isn’t performing the way it once did, or if you feel like you’re stepping on the gas pedal and not much is happening, it may be time to replace the fuel pump. This article applies to the Chevrolet Silverado (1999-2006).

How do you Drop the fuel tank on a Chevy Silverado?

This article will walk you through the second method of dropping the fuel tank. Open the hood. Pull the fuel pump relay from the fuse box. Start the vehicle and let it run until it shuts down. Figure 1. Pull the fuel pump relay and start the engine in order to relieve gas pressure in the line and the pump.

How do you replace a fuel pump relay?

Reconnect the power plugs to the top of the fuel pump with the quick connect wiring harnesses. Reconnect the fuel lines and lastly, reconnect the filler neck and tighten down the hose clamp and the vapor hose. Keep the truck in the air while you replace the fuel pump relay and start your truck.

How to replace a fuel pump in an Astro van?

Astro Van Fuel Pump Replacement – 1996-2005 (GMC Safari) – 4 MINUTE DIY VIDEO – YouTube NOTE: For some reason some models have an additional cover over the gas tank.

Where does the fuel pump go in a truck?

Searched forever for an answer. It turns out that in order to remove the bed of the truck, you must disconnect the ground for the fuel pump, which attaches in the rear on the drivers side. IIRC it ran either in or alongside the harness for the tail light wiring. Once I hooked that back up, my truck started right up.

What to do if your fuel pump has no power?

Check the ECM B fuse located in the under hood fuse box. This is the power supply to the fuel pump and relay. If the fuse is bad, then replace it to see if the fuel pump has power. The truck may start if the fuse is replaced but you will still need to replace the pump.

Where is the fuse for the fuel pump?

ASE MASTER replied 9 years ago Check the ECM B fuse located in the under hood fuse box. This is the power supply to the fuel pump and relay. If the fuse is bad, then replace it to see if the fuel pump has power. The truck may start if the fuse is replaced but you will still need to replace the pump.

What happens when the fuel pump goes out on a GMC Sierra?

There are physical signs that you can feel when your Sierra’s fuel pump is going out. Before taking anything apart, check to see if your engine’s computer has any trouble codes saved in it. The engine may throw a P0087 trouble code. This trouble code detects that the fuel rail/system pressure is too low.

What is the GM diesel truck fuel pump defect?

Consumers who own vehicles installed with a Bosch CP4 fuel injection pump may be affected by a GM diesel truck fuel pump defect. What is the GM Diesel Truck Fuel Pump Defect?

Where is the weep hole on a mechanical fuel pump?

Most mechanical fuel pumps have a weep hole on the bottom side of the unit. When the internal diaphragm leaks, fuel escapes through the weep hole to notify the vehicle owner of a malfunction. This is one of the more common fuel pump problems. Usually found on classic cars between 30 and 60 years old.

What causes poor fuel delivery on an old car?

Before looking at the fuel pump, make sure there is gasoline in the tank.Another reason for poor fuel delivery on older vehicles is a pinhole leak in the fuel line. A good place to start would be to check the neoprene hose connector between the tank outlet and the fuel line.

Why is my GM fuel pump not working?

One of the things that can have you replacing a good fuel pump is an anti-theft system (PassLock) failure. How? This is due to the fact that when the Passlock system arms itself on your GM pickup or SUV, the engine will crank but won’t start, since the PCM has disabled the fuel injectors.

How to troubleshoot a no start GM 4.3L?

The following tutorial may be of help: How To Troubleshoot A No Start (GM 4.3L, 5.0L, 5.7L). CASE 3: The engine started and stayed running. This confirms that the fuel pump is starting to fail. The next step is to confirm the exact fuel pressure with a fuel pressure gauge to be absolutely sure.

How do you start a GM fuel pump?

Open the throttle plate, manually, and spray starting fluid down the bore. When you have sprayed a good squirt of starting fluid, quickly reconnect the air duct to the throttle body (you don’t have to tighten the fastener).

What happens if the fuel pump relay fails?

If the fuel pump relay fails, what usually happens is that the oil pressure switch feeds power to the fuel pump and gets the engine started and keeps it running. When this happens, the engine will crank till the oil pressure gets up and the oil pressure switch closes. Fuel pump in-line fuse -20 Amp.

What to know about a GMC Safari van?

Chevrolet Astro And GMC Safari Van Specific Discussion. Discuss the cabin from the headliner to the carpeting of your Astro or Safari van. Topics include door panels, and seat belts or the dash and carpet, trim, and seats. Talk about your center console, seats, door handles, upholstery, steering wheels or any other item in the cab of your van.

How can I extend the life of my fuel pump?

There are a few ways that the average driver can extend the life of their fuel pump with very little effort: Always keep the tank at least a quarter of the way full. Gas acts as a coolant for the fuel pump, and if the tank runs dry then there is no liquid to cool the pump. Overheating shortens the life of the fuel pump.

How do you replace a fuel pump in a GMC?

Strike the end of the screwdriver with the hammer in a counterclockwise motion . Once the retaining ring is loose, pull off the fuel tank. Pull the O-ring off the threads and replace with a new O-ring. This will prevent leaking when the fuel tank is filled up. Lift the fuel pump out of the tank.

Why is my fuel pump not working when I replace it?

The concern with the fuel gauge is a common issue when replacing the fuel pump. The fuel level sensor is a separate component attached to the fuel pump. This part does not always come with the fuel pump and sometimes is not interchangeable with aftermarket fuel pumps. Chevrolets have a common issue with fuel filters getting clogged.

Do you need to replace fuel filter when replacing fuel pump?

The fuel level sensor is a separate component attached to the fuel pump. This part does not always come with the fuel pump and sometimes is not interchangeable with aftermarket fuel pumps. Chevrolets have a common issue with fuel filters getting clogged. You always want to replace the fuel filter when replacing the fuel pump.

Why is there no fuel going to the fuel tank?

Another logical cause could be the fuel pump. If the fuel pump is electric, the 12-volt power may be shorted. A hole in the fuel line on the tank side could also cause the fuel pump to suck air instead of fuel from the fuel tank.

Symptoms were intermittent stalling while driving and failure to start when the engine was warm. The fuel pump and PMD was replaced with a GM factory replacement purchased from a GM dealer. One week before the (one year) warranty on the replacement pump/pmd expired, the new pump began showing the same symptoms.

How to replace a fuel pump in a 1995 GMC 5.7?

Replace a fuel pump in a 1995 GMC 5.7. – YouTube Replace a fuel pump in a 1995 GMC 5.7. If playback doesn’t begin shortly, try restarting your device.

What are the symptoms of a fuel pump relay problem?

1. Engine stalls One of the first symptoms of an issue with the fuel pump relay is an engine that suddenly stalls. If the fuel pump relay has an issue while the vehicle is operating it will cut off power to the fuel pump, which will cause the engine to stall.

Why does my car not start with a fuel pump?

Car Will Not Start Virtually all modern vehicles with internal combustion engines come equipped with fuel pumps. The fuel pump is responsible for delivering fuel from the gas tank to the engine at the appropriate pressure required for performance demands.

What happens when the fuel pump shuts down?

The engine shuts down because weakening parts of the fuel pump cannot keep up with the car’s heightened fuel demands in these situations. In these circumstances, the car will feel like it is unable to go or maintain the intended amount of power.

What causes a Duramax injection pump to fail?

As a result (allegedly), the lack of lubrication in the fuel can cause a premature failure of the injection pump, to a point where it won’t allow the LML Duramax to run. You can be driving down the road and everything seems normal, and when the pump fails, the truck just shuts off.

Why does my fuel pump cut off while driving?

Ended up being a faulty crank position sensor. Its used to fire right back up. But now when it shuts off it does not crank back at all. Also whenever you turn the key to on the fuel pump doesn’t cut on. But everything else will work. Check to see if you have spark and fuel pressure.

How long does it take to change fuel filter on GMC Truck?

Assuming its an 02 by your username, change the fuel filter. If its completely clogged it could cause this. It’s $10 and takes 5 min. Assuming its an 02 by your username, change the fuel filter. If its completely clogged it could cause this.

How to check fuel pressure without the fuel pump working?

Check to see if you have spark and fuel pressure. Sprayed starting fluid and it ran the starter fluid out then knocked off again. So I got spark. How do I check fuel pressure without the fuel pump working. At it again!!! That sounds like what s happening to mine.

How does a fuel pump relay get power?

The relay wires should have ground on two wires, power on one wire and switched power on another wire. To activate the fuel pump the computer actually connects one of the ground wires to complete the circuit and send power to the fuel pump.

How does a computer activate a fuel pump?

To activate the fuel pump the computer actually connects one of the ground wires to complete the circuit and send power to the fuel pump. The wire coming from the fuel pump is the other ground wire.

What kind of fuel pump does a Chevy truck use?

Fits perfectly for any 1988 to 1998 fuel pump in a Chevy truck. Fuel pump is great and I haven’t had any problems with it. Also the warranty is good to have, always. Pages with related products. See and discover other items: 94 silverado, 95 gmc sierra, 1989 gmc sierra, pump fuel, parts for chevy 1989, 1992 gmc parts

What kind of fuel pump does a GMC k1500 have?

Had to do the job twice so not very happy about that, waste of my Sunday. This was a exact fit for my 92 GMC K1500 with a 5.7L VIN K motor. It fixed my low power, runs rough and start / stall issue.

Where can I buy a fuel pump kit?

Images depict actual item and necessary components *** This Complete Fuel Pump Kit contains the Module, Sending Unit and all necessary components – all built according to the highest standards of quality and precise specifications. These items are shipped from and sold by different sellers.

Why does my fuel pump only run for a few seconds?

This sound is the electric fuel pump trying to prime the fuel system. It will only run for a few seconds and then shut off. If you are not sure you could hear it or if there is noise outside; you may have to try it several times. Turn the key on and wait then turn it off.

How does a GMC Sierra 1500 fuel pump work?

The older model has steel lines coming off of the top of the pump to the frame rail and then connects to the frame steel lines with short hoses, you’ll need line wrenches and the ability to curse. The newer style has plastic tubes from the plastic pump casing and uses those quick connect fuel fittings and you’ll need the disconnect tool.

Why does a fuel pump need to be close to full?

Keeping the tank closer to full also helps minimize condensation of water in the tank. Need a part?Save money while supporting CarTalk. The fuel in your tank helps to cool the electric fuel pump, which frequently generates a fair amount of heat as it runs.

How to check fuel pressure in a GMC Sierra 1500?

You will have to check the fuel pressure at the rail, the test port is ontop driverside about 3/4 the way back. Black cap on aluminum fuel line. The best thing would be to buy or rent a fuel pressure test gauge as it would thread onto this port. If not I’ve used good safety glasses a rag and a screwdriver to check for pressure.

How does the fuel pump work in a car?

The fuel pump is a device that moves fuel from your tank to the engine, supplying the fuel at a constant pressure to ensure that your engine runs smoothly.

What’s the best way to replace a fuel pump?

If playback doesn’t begin shortly, try restarting your device. I like fixing things. all kinds of things. I do pretty much everything myself. I like making things.

How much does it cost to replace fuel pump in GMC Sierra 1500?

The average cost for a GMC Sierra 1500 fuel pump replacement is between $1,025 and $1,075. Labor costs are estimated between $195 and $245 while parts are priced at $830. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

When to know if your GMC Sierra fuel pump is bad?

If your car isn’t starting at all, and you hear the fuel pump prime that is usually a good indication that the pump is working to some capacity. Testing your Sierra’s fuel pressure on each side of the pump would be the best way to diagnose this problem.

What to do if your fuel pump loses power?

Electrical wiring issues can be a nightmare if you don’t have the appropriate wiring diagrams to see which wires go to where. A mechanic, such as one from YourMechanic, will have access to the proper schematics to help you diagnose this your fuel pump’s loss of power and have your car safely back on the road.

If playback doesn’t begin shortly, try restarting your device. I like fixing things. all kinds of things. I do pretty much everything myself. I like making things.

Where is the reset on a GMC sirrra?

I have a 2007 GMC Sirrra and there is a reset for the fuel pump you simply manually pump it a few times. It is on the passenger side toward the back under the hood. It is silver and easy to miss. Have pumped it three times after truck got hot. Worked great.

How does the fuel pump work in a GMC?

FUNCTIONS – Suck the fuel from the fuel tank, pressurize it and then deliver it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Guaranteed supply of continuous fuel to the injector

What kind of fuel pump does a Chevy Silverado have?

01-03 ChevySilverado 3500 V8 8.1L 496cid; 01-03 Chevy Silverado 1500 HD V8 6.0L 5967cc 01-03 Chevy Silverado 2500 HD V8 6.0L 5967cc; 01-03 Chevy Silverado 2500 HD V8 8.1L 496cid Always keep enough fuel in the tank for the pump to be submerged in gas.K eep the habit of fueling to your car in time.A

Where do I check for power to fuel pump?

If not all of them check for power at the ECM B fuse. And finally I am assuming you have the single tank and not dual.

Do you need constant ground for a fuel pump?

The fuel pump should have constant ground, if you do not have it I would abandon what you are looking for with power. The reason I say that is I seriously doubt you had two different problems with the same system at opposite ends of the vehicle that manifested themselves at the same time.

If not all of them check for power at the ECM B fuse. And finally I am assuming you have the single tank and not dual.

Can a GMC Sierra run without a fuel pump?