Common questions

Why is the airbag light on on my Chevy Cobalt?

Why is the airbag light on on my Chevy Cobalt?

The cause of the B0085 trouble code is either a bad connection in the wiring harness connector or a bad impact sensor. Start by removing the door trim panel on the driver’s door to access the Side Impact Sensor (SIS). Next, remove the console to get to the Sensing and Diagnostic Module (SDM), the airbag computer.

Where is the airbag code on a 1996 Chevy?

If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.

Why does my airbag light keep coming on?

If your Chevrolet airbag light stays on and won’t turn off, it is because the Safety Restraint System (SRS) has detected a problem with one of the airbag components. Two possibilities include damaged wires or low voltage.

Where is the VIN on a Chevy airbag?

Chevrolet has issued several airbags recalls over the years. Find your VIN at the lower-left corner of the windshield and call any Chevy dealer to check if any recalls are open. If there is an open recall for your Chevy airbag system, the dealer may fix that problem-free charge if related to the recall.

The cause of the B0085 trouble code is either a bad connection in the wiring harness connector or a bad impact sensor. Start by removing the door trim panel on the driver’s door to access the Side Impact Sensor (SIS). Next, remove the console to get to the Sensing and Diagnostic Module (SDM), the airbag computer.

Who is the owner of the 2008 cobalt?

2008 Chevrolet Cobalt Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name COBALT are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

How do you turn off the heated seat on a Chevy Cobalt?

Both indicator lights will be lit to indicate that the setting is on high. Press the side of the switch with the single indicator light to go to the low setting. The indicator light will be lit to indicate that the setting is on low. Return the switch to the center to turn off the heated seat.

2008 Chevrolet Cobalt Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name COBALT are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

Both indicator lights will be lit to indicate that the setting is on high. Press the side of the switch with the single indicator light to go to the low setting. The indicator light will be lit to indicate that the setting is on low. Return the switch to the center to turn off the heated seat.

Why is my airbag light on on my car?

GM has issued a service campaign bulletin #10085D for the vehicles listed below. The bulletin address a problem with the electrical connectors for the airbag system that causes an Airbag Light on or Service Airbag Message to appear.

How do I Turn Off the airbag light?

1. Disable the airbag system. 2. Replace connectors on both driver and passenger seats. Then reroute and attach the harnesses to the seat using the service kit. 2. Disconnect connector C308 from driver’s seat cross-beam. 3. Remove the driver’s seat. 4.

What happens if you ignore the seat side impact air bag light?

When that happens, the seat side impact air bag is fully functional. However, if you ignore the warning light, over time the resistance can increase to a level where the seat side impact air bag may not deploy in a side impact crash. Dealers will replace the front seat-mounted side impact airbag terminals and connector body.

When did they stop making the Chevy Cobalt?

The vehicle was introduced in the fall of 2004 as a 2005 model year as the successor to the Chevrolet Cavalier. At the end of June 2010 production of the Cobalt was stopped.

When did Chevrolet Cobalt TPMS tire pressure sensor light come on?

Easy Way To Reset Chevrolet Cobalt TPMS Tire Pressure Sensor Light (2008-2010) – The Chevrolet Cobalt is a lower-middle-class passenger car offered by General Motors between 2005 to 2010 in the USA market. The first presentation took place formally at the LA Auto Show 2003.

What to do when your airbag light comes back on?

After you clear the Chevrolet airbag light, turn off the ignition then back on to determine if the airbag light has been reset. Go back to the Airbag / SRS control unit. Scroll down to Clear / Erase Fault Codes and press enter. If the problem hasn’t been fixed, the airbag light will come back immediately or as soon as the problem is detected again.

If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.

How does the airbag scanner work on a Chevy?

Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port. The port is trapezoid in shape and allows the scanner to plug only in one direction. Turn on the ignition. Do not start the engine. If your Chevrolet has a START/STOP button, press this button without pressing the brake pedal. Allow your Chevrolet airbag scanner to power on.

What is the air bag code for a 2006 cobalt?

2006 cobalt air bag code b0081 passenger presence system 1… 2006 cobalt air bag code… Submitted: 10 years ago. Category: Chevy Experience: GM Grand Master Technician 2007. 14 years experience. Hello, I’m Cam. Please include all the details about your issue so I can accurately advise you. I cannot see your vehicle so please be detailed.

Where is the DTC air bag code b0081 stored?

#09-09-40-003A: SIR/Airbag Light Illuminated, DTC B0081 and Passenger Presence System (PPS) Code 23 Stored (Replace Passenger Seat Belt Retractor and Re-Route Wire Harness) – (Jul 26, 2010) This bulletin is being revised to update the model years.

Where is the BTS connector on a cobalt?

Check for shorts, opens and continuity between the PPS module and belt tension sensor (BTS) mating connector that is part of the vehicle harness (Located under the passenger rear trim panel near the rear seat cushion). Clear the codes. Verify that the DTC does not reset. Remove the rear passenger quarter trim panel and rear seat cushion.

2006 cobalt air bag code b0081 passenger presence system 1… 2006 cobalt air bag code… Submitted: 10 years ago. Category: Chevy Experience: GM Grand Master Technician 2007. 14 years experience. Hello, I’m Cam. Please include all the details about your issue so I can accurately advise you. I cannot see your vehicle so please be detailed.

#09-09-40-003A: SIR/Airbag Light Illuminated, DTC B0081 and Passenger Presence System (PPS) Code 23 Stored (Replace Passenger Seat Belt Retractor and Re-Route Wire Harness) – (Jul 26, 2010) This bulletin is being revised to update the model years.

Check for shorts, opens and continuity between the PPS module and belt tension sensor (BTS) mating connector that is part of the vehicle harness (Located under the passenger rear trim panel near the rear seat cushion). Clear the codes. Verify that the DTC does not reset. Remove the rear passenger quarter trim panel and rear seat cushion.

What does it mean when your airbags are not deploying?

The issue can be minor, or it can be something a lot more pressing—it may be telling you that your airbags will not deploy should an accident occur! This means that you will not be protected and can face some serious injury or possibly even death. Therefore, when you see the service airbag message pop up, you should immediately get it fixed.

What does it mean when SRS airbag light comes on?

Therefore, when you see the service airbag message pop up, you should immediately get it fixed. What you might also experience with the service airbag message popping up is your SRS airbag light turning on. This may occur if your car was previously involved in an accident that resulted in the crash sensors’ activation without the airbags deploying.

GM has issued a service campaign bulletin #10085D for the vehicles listed below. The bulletin address a problem with the electrical connectors for the airbag system that causes an Airbag Light on or Service Airbag Message to appear.

The issue can be minor, or it can be something a lot more pressing—it may be telling you that your airbags will not deploy should an accident occur! This means that you will not be protected and can face some serious injury or possibly even death. Therefore, when you see the service airbag message pop up, you should immediately get it fixed.

Therefore, when you see the service airbag message pop up, you should immediately get it fixed. What you might also experience with the service airbag message popping up is your SRS airbag light turning on. This may occur if your car was previously involved in an accident that resulted in the crash sensors’ activation without the airbags deploying.

Author Image
Ruth Doyle