Why is the ABS light and brake light not working?

I have a 1998 Dodge Ram 1500 Both the ABS light and the brake light are on. Changed the Speed sensor on the differential it didn’t help. I did replace the RWAL/ABS fuse and now the speedo works. Next I’m checking the front wheel sensors after that idk what to try. Any advise would be helpful. I have a 99′ Dodge RAM 2500.

Why is my odometer and speedometer not working?

Odometer & speedometer not working ABS & Brake warning lights lit. I have the same problem! what number fuse is it? and where is it located ? 756 people found this helpful.

Why is my odometer not working on my Dodge Ram 1500?

My speedo was possessed, fluctuating while parked and the odometer was advancing, also while parked. The ABS, Check engine, and Brake lights were all on. I first bought a new CPU. wasn’t the problem and took it back, tried a new Gauge cluster from a friends truck, still nothing.

Are there any ABS sensors on the rear axle?

The rear ABS sensor mounted on the rear axle also acts as a speed sensor to let the abs system know the speed of the vehichle is it possible that both sensors could go out ?

Why is the ABS not working on my Dodge Ram?

Any advise would be helpful. I have a 99′ Dodge RAM 2500. It started to not clear ABS and Airbag lights upon startup (go off for a second and then relight. Then if you try to operate truck, the speedometer would not work (no ODO on mine).

Do you need to get your ABS Module replaced?

No need to get your ABS Module replaced… they only tell you this to get more money. I fixed mine by simply unplugging the ABS Module that’s located directly behind the battery. The plug connector on Dodge’s has a problem letting moisture/water get into the plug. Use an air hose to blow out the moiture and you can even let it dry out for a bit.

Is the speedometer not working and ABS and brake light stay?

Re: Speedometer not working and abs and brake light stay… You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert whose answer got voted for 2 times. Re: Speedometer not working and abs and brake light stay…

How to fix ABS and brake light on Dodge Ram?

Dodge Ram abs, airbag, brake light, speedometer fix! – YouTube Dodge Ram abs, airbag, brake light, speedometer fix! If playback doesn’t begin shortly, try restarting your device.

When did the Speedo stop working on my Dodge Ram?

53 people found this helpful. I have a 2001 Dodge Ram 3500 Van and about 9 months ago the speedo stopped working, the AC stopped working (blowing cold and vent blowing on HIGH), the ABS and Brake light came on steady and the check engine light came on. It also pulsed or surged at times when driving.

Dodge Ram abs, airbag, brake light, speedometer fix! – YouTube Dodge Ram abs, airbag, brake light, speedometer fix! If playback doesn’t begin shortly, try restarting your device.

Why is there no brake warning light on my Dodge Dakota?

A wheel speed sensor and a problem with the main system. It’s possible that when the brakes were recently done the parking brakes were not properly adjusted. That could illuminate the brake warning light.

What’s the problem with my abs speed sensor?

The problem is most likely the ABS speed sensor. You can buy the exact part I used to fix my truck from the amazon affiliate link below. Make sure to double check that it fits your vehicle by using the amazon fit check feature. I saved 50% – 66% compared to the cost at the auto parts chains around my house. Loading…

What should you do if your abs light is on?

Just because your ABS light is on, that doesn’t mean you can’t drive your vehicle. In fact, you will still be able to step on the brake pedal and slow the vehicle down. However, you cannot perform any kind of emergency stop by slamming the brake pedal quickly.

What should I do if my ABS sensor is not working?

Debugging is best done with a DMM; an OBDII scanner can ONLY find “communication errors”, i.e., it cannot tell a bad speed or pressure sensor from a bad ABS control module and will often report the wrong problem because it isn’t inserted BETWEEN the ABS control module and the various sensors (see extensive reports by 540iman on this ).

Is it possible to have an ABS light but no codes?

Connector is shown in figure 5E1-16 See also “system diagnosis chart B “Anti-Lock” Lamp on and no abs codes present. If I was getting that, I’d try just adding a ground wire right at the EBCM mount but 4.4 ohms should not bother it.

Where can I find the ABS code on my car?

It is in the harness near the EBCM in the trunk. ABS light is yellow as stated in site below-also going there, taking the tests will probably identify your problem. ABS codes are found at the ALDL also described at reatta.net /brakes.

Why is my anti lock brake light on?

The anti-lock brake system is a complex configuration of computers and sensors. When all of the components are working in perfect harmony, it ensures a quick, reactive system that can improve braking control under all surface conditions. Faults in this system are often first indicated by illuminated lights in the gauge cluster.

What does ABS light on, Trac off mean?

Repair Topics > Brakes > ABS light on, TRAC off,… ABS light on, TRAC off, Stabilitrac off – What does it mean?

What do you hear when your abs light is on?

In addition to the warning lights, you may also hear a brief and intermittent noise, click, ratchet, grind, or ABS pump motor noises from the inside of the vehicle at parking lot speeds when braking.

Why is the ABS light and brake light not working?