Why is my John Deere 7410 Power Quad not working?
Why is my John Deere 7410 Power Quad not working?
I bought a 7410 john deere tractor and the transmission was shifting fine but the oil had large clutch fibers pieces so I rebuild the power quad part of the transmission and now the clutch will not work ,I have 215psi system and 14 psi lube Welcome.
What kind of tires does a John Deere 7410 have?
GOOD 1997 JD 7410 MFWD TRACTOR, 15292 HOURS, RECENT 2008 JD 740 NSL LOADER INSTALL, OTHERWISE WAS A HAYING TRACTOR. 16SPD PQ TRANS W/RH REVERSER, 2 REAR HYD AND BIG 26GPM HYD PUMP, 80% 18.4R38 REAR TIRES, 50% FRONT TREAD. RUNS AND DRIVES GOOD. Tire Width: Mid
What causes PTO switch to stop working on John Deere 6410?
But thats another story. Check your seat sensor (the wire that goes to the seat and the sensor under it) and the your PTO switch (the lift and twist one) They are known to go and cause that problem as well as the RPM sensor. At least on the 6400 anyway, I doubt the 6410 is much different in that department.
Is it possible to get copies of service manuals for JD tractors?
Most local dealer lost the ability to service this size tractor b/c no market in the area, but they had a service manual that we borrowed that allowed us to read the error codes and diagnose the problem. Sucks to be shut down for 4 days for a $58 selenoid. Is it possible to get copies of service manuals for JD tractors? It was the PTO Selenoid.
I bought a 7410 john deere tractor and the transmission was shifting fine but the oil had large clutch fibers pieces so I rebuild the power quad part of the transmission and now the clutch will not work ,I have 215psi system and 14 psi lube Welcome.
What are the speeds of a PowrQuad PLUS transmission?
The PowrQuad (OOS only) and PowrQuad PLUS (cab only) 16/16 provides 16 well-spaced forward speeds (1.5 mph to 18.0 mph, or 2.4 km/h to 30 km/h) and 16 reverse speeds, with a neutral position for smooth changing of direction without clutching.
Where is the neutral position on a PowrQuad transmission?
The left-hand reverser with the neutral position is located in an optimum ergonomic position underneath the steering wheel. This allows quick, convenient, and smooth forward reverse shuttle shift at any speed. Forward/reverse ratio between -3 and +3 (for example, +1 means that reverse speed will be increased by one speed).
Where is the de clutch button on a PowrQuad PLUS transmission?
Powershift gears switch beside the hitch control for simultaneous working (4) The transmission de-clutch button feature is standard on AutoQuad PLUS and on the PowrQuad PLUS transmissions, enabling to shift ranges on the go without pressing the clutch pedal.
