Why does my blower motor not come on?

You should be able to find this relay or sequencer by tracing the blower motor wires back to the relay or sequencer. If power is going into the sequencer or relay and not coming out when the 24 volts are applied then you have a relay or sequencer problem and the sequencer or relay will need to be replaced to get your blower running right again.

What should I do if my blower fan is not turning?

Repair the connector. If the motor still does not turn, the motor is bad. Replace the motor. Test the switch. Plug the connector back in to the blower motor, and then trace the wire harness back to the connector closest to the blower motor switch, usually located under the dash. Disconnect the connector and set the multimeter to ohms.

What happens if you lose the blower motor relay?

The blower motor is the component responsible for pushing air through the vents of your vehicle’s heating and air conditioning systems. Without it, the AC system will not be able to circulate any heated or cooled air. The blower motor relay controls the current used to power the blower motor,…

How can I tell if my blower fan is a relay?

The only way to test and see if it is a blower motor relay would be to test with a voltmeter to see if the motor is getting 110 volts to the motor when it starts going off and on. I hope you can easily find and fix the problem.

What happens if a heater blower has no power?

A blower motor without power will not be able to produce any air pressure, and as a result the heating and air conditioning system will be left with no air coming from the vents.

What causes a blower motor to stop working?

In a situation where the motor doesn’t work on any speed, the most likely causes are: a blown power supply fuse, a bad motor ground connection, bad motor speed control module or a failed motor. On all systems, a failed blower motor is least likely. Blower motors generally don’t fail out of the clear blue.

What are the signs of a bad heater motor?

Common signs include the car’s heater not working or getting stuck on a certain speed, or something getting jammed in the blower motor. 1. Blower motor stuck on one speed 2. Blower motor does not work on certain settings 3. No air from the vehicle’s vents Average rating from 130,908 customers who received a Vehicle Engine Cooling Inspection.

How can I tell if my blower motor resistor is faulty?

Another symptom of a faulty blower motor resistor is no air from the vehicle’s vents at all. Power to the blower motor is fed through the blower motor resistor, so if it fails or has any issues power can be cut off to the motor.

What are the symptoms of a bad blower motor relay?

3. Melted relay. Another more serious symptom of a problem with the blower motor relay is a burned or melted relay. Relays are exposed to high current loads and can sometimes get hot when they develop problems.

How to test a Mercedes Benz fan blower motor regulator?

This is the blower motor resister, which controls the fan speeds. Disconnect the multi-wire connector from the blower motor resister next to the blower motor. Start the car and turn the air conditioning on. Test the connector for power at the terminals in the connector using the voltmeter. If there is power, reinstall the connector to the resister.

How do you fix a blower motor on a car?

Disconnect the electrical connector at the blower motor and jumper power and ground to the motor, bypassing all the speeds controls. Run a fused jumper from the battery to the power side of the motor and connect a temporary grounding jumper to the other motor terminal.

What are the symptoms of a failed blower motor resistor?

Blower motor resistor problems. Problems with a blower motor resistor are common in many cars. The most common symptom of a failed blower motor resistor is when the heater fan only runs at high speed and doesn’t work at low speeds.

How does a blower motor work in a car?

Carmakers use these three common wiring methods to supply power and ground to the blower motor in a manual system using a blower motor resistor. In one design, the car maker supplies battery power to the speed switch, which switches the power to the appropriate connection on the blower motor resistor.

Why is my AC blower not working?

A common problem behind an air conditioner blower not starting includes overheating, which keeps the motor from running. Let your air conditioner rest and cool down for a while before trying to turn it on again; if the motor works at that point, overheating is probably the problem.

What are the symptoms of blower motor failure?

Lack of air from the vehicle’s vents
Stuck on specific settings
Stuck at one speed

Is my blower motor bad?

No air from the vents. No air flow from the vents when the heater or air conditioning is activated is another symptom of a bad blower motor. If the heater blower motor burns out or short circuits, it will not function, and therefore will not be able to produce any airflow for the system. The blower motor will usually have to be replaced in order…

Why does blower motor resistor keep going out?

The blower motor appears to be defective here. When the brushes wear out the motor draws excessive amps which could cause the resistor to burn out. Before making further replacements remove the motor and check it, especially the brush assembly. This is the most likely reason for the resistor to fail repetitively.

When do you need to replace the blower motor relay?

If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay. 1. Blower motor does not function 2. Blown fuses 3. Melted relay The blower motor relay is the electrical switch that is used to supply the power for the vehicle’s blower motor.

Where is the blower control switch on the dashboard?

The blower control switch on the dashboard controls the circuit flow of the blower motor to adjust the voltage from low, to medium, to medium-high, to high. When on high, the circuit bypasses the blower resistor.

If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay. 1. Blower motor does not function 2. Blown fuses 3. Melted relay The blower motor relay is the electrical switch that is used to supply the power for the vehicle’s blower motor.

The only way to test and see if it is a blower motor relay would be to test with a voltmeter to see if the motor is getting 110 volts to the motor when it starts going off and on. I hope you can easily find and fix the problem.