Common questions

Why does my Blazer make a rubbing noise?

Why does my Blazer make a rubbing noise?

Anyway, I have this rubbing/vibration noise that just started; can feel it immediately even at low speeds, almost like driving with studded tires; gets louder the faster I drive. If I turn the wheel to the right, same thing; to the left… goes away.

Is there an amp in the back of my Blazer?

Well, just before this starting happening, my son and I installed a sub and amp in the back of the Blazer.

Why does my Blazer vibration go away when turning left?

You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front). They said the reason the vibration went away when turning left was because the weight of the Blazer shifted to the right side.

What kind of car makes a gurgling noise?

I have 96 Chevy Blazer (automatic) that’s been making a slight gurgling noise (sounds like water – think “babbling brook”). I only recently got the vehicle and I’m thus not too familiar with what’s normal and what’s not.

Are there any LS S10 swaps left in stock?

Only 2 left in stock – order soon. . . Temporarily out of stock. . Only 2 left in stock – order soon. . Only 2 left in stock – order soon. . Only 2 left in stock – order soon. . . . Temporarily out of stock.

Why does my Blazer make a noise when idling?

Makes noise after a cold-start and while idling. I’m not sure if it was making this noise before the radiator replacement or not; I wasn’t really paying attention. You most likely have air in the system, I had the same issue with my 99 Blazer. It seemed as no matter how much I bled it it I couldn’t get rid of it.

I have 96 Chevy Blazer (automatic) that’s been making a slight gurgling noise (sounds like water – think “babbling brook”). I only recently got the vehicle and I’m thus not too familiar with what’s normal and what’s not.

Anyway, I have this rubbing/vibration noise that just started; can feel it immediately even at low speeds, almost like driving with studded tires; gets louder the faster I drive. If I turn the wheel to the right, same thing; to the left… goes away.

Well, just before this starting happening, my son and I installed a sub and amp in the back of the Blazer.

Why is my Blazer still picking up speed?

2) The Blazer still picks up speed and drives well except for the rubbing/vibration now. Would having pulled out and put back in the dash switches or being in such close proximity to the TCCM caused issues?

Is there a problem with my Chevy Blazer 4×4?

Yes my name is kyle and I have a 1999 chevy blazer 4×4 and i have the same tccm problems like everybody else but my only problem is that i need the new 32 pin femal plug and the 4pin female cause my tccm is in working condition. I can’t find then plugs and wires anyplace i know what are odds there.

Yes my name is kyle and I have a 1999 chevy blazer 4×4 and i have the same tccm problems like everybody else but my only problem is that i need the new 32 pin femal plug and the 4pin female cause my tccm is in working condition. I can’t find then plugs and wires anyplace i know what are odds there.

You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front). They said the reason the vibration went away when turning left was because the weight of the Blazer shifted to the right side.

Why does my blazer have a bad bearing?

OK; got the Blazer back from the shop. You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front).

Why does my car make a thumping noise when I leave the car?

Especially in cars parked outdoors, rust can build up overnight on the rotor around the impression of the pad, causing a thumping or squealing when you drive the car away in the morning. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Why does my car make a noise when I’m not applying the brakes?

If you hear this type of noise when you’re not applying the brakes, have a mechanic do a brake inspection just to be on the safe side. The wear indicator may be warning you that your brake pads are getting low and need to be replaced soon.

What should I do if I hear a thumping noise on my brakes?

Do this three to five times, while keeping a steady speed; the noise should disappear, or at least be 90% gone. Then drive the car at normal speeds and use the brakes the way you normally would. If the noise has not changed, you may have a different thumping noise than what I have described here in this article.

Why does my car make a grinding noise when I drive?

If you’re hearing a grinding noise when you drive, and you’re not applying the brakes, it could be that the brake pads are worn metal-to-metal. They should be inspected ASAP! Your brakes may be worn away to nothing, and continuing to drive may be dangerous

Why does my Chevy Silverado make a clicking noise?

I have the same clicking noise on a 2005 with a 5.3. The stethoscope tells me it is inside the oil pan near the back. It is directly related to RPM. Oil pressure is fine and I drive it everyday but the noise is irritating 84 people found this helpful. Guys! Ive had the same problem for quite a while.

Why does my oil pump make a loud knocking noise?

If you look at your oil pressure and it reads anything under 40 at cold start idle this means your oil pump screen has one of two things: 1) It is clogged and needs to be cleaned, these things are pure metal so a costly replacement wouldn’t be worth it, a simple clean will suffice.

Can a low oil level cause a service engine soon light?

Yes, Low engine oil level can cause the service engine soon light to appear on your dashboard on a lot of car models. It can also mean that other low fluid levels are low or other problems with the car. It is relatively easy to check the oil level, though, so you should definitely begin with it.

Why is my lifter making a loud knocking noise?

The noise is camshaft/lifter roller damage caused by the plastic lifter guide worn on one lifter allowing the lifter to ever so slightly rotate causing the roller to dig into the cam lobe and gaulding both surfaces.

What kind of noise does front suspension make?

Noise in front suspension ( 05′ z71 ) when turning wheel to the left. Major Vibration?!?!

Is the 4×4 light on on my Blazer?

I read what you said about the wires on the Blazer, but mine were not corroded. I took it off and cleaned it up anyway and it came back on, but as soon as I turned the key off she was gone again. I don’t have any lights lighting up on the 4×4 switches. Service 4X4 light is on in the dash. I don’t know what is going on.

Why does my 4×4 front differential make grinding noise?

lift up on the axle shaft to remove it and this is what you get. you can see where the gear is a bit chewed up from improper engagement due to faulty vacuum switch on the transfer case. if your front end randomly grinds when on the highway or whatever this is what is causing the noise. next lift up on the shift fork assembly.

OK; got the Blazer back from the shop. You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front).

How to troubleshoot a clicking or popping sound in car?

Make turns where you can turn the vehicle in multiple directions. Listen for any clicking or popping sounds. Step 2: Drive the vehicle over bumps or potholes. Listen for any clicking or popping sounds that can permit as the hubcaps move around. Step 3: Drive the vehicle to speeds of 40 to 45 miles per hour.

Author Image
Ruth Doyle