Why do I have a code p2101 on my engine?

The diagnosis of this code requires viewing data on a scan tool. The possible causes of this code are damaged wiring that is shorted to power or ground between the engine computer and the throttle assembly, the throttle assembly or the Engine computer (ECM) itself.

How to diagnose p2101 Chevrolet throttle actuator performance?

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. How much do you know about cars? What does this mean? The cost of diagnosing the P2101 CHEVROLET code is 1.0 hour of labor.

How much does it cost to repair a Chevy p2101?

The cost of diagnosing the P2101 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Is the tail light connected to the p2101?

The tail light has not connection to the P2101. These vehicles have had issues with the circuit boards for the tail lamps. There was even a recall on them. I would remove the left rear light socket and carefully inspect the terminals of the bulbs and the terminals and plastic surrounding the bulb terminals.

How much does a p2101 Chevrolet code cost?

The cost of diagnosing the P2101 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P2101 CHEVROLET code detected?

Why do I have a code p2101 on my computer?

The possible causes of this code are damaged wiring that is shorted to power or ground between the engine computer and the throttle assembly, the throttle assembly or the Engine computer (ECM) itself. The first thing I would check is the wiring and terminals from the ECM to the throttle assembly.

Are there any problems with the GMC Canyon?

GMC Canyon Problems. Find the most common issues based on car owner complaints. To check for problems affecting your car, select your make and model below: Tap theto learn more about the most common GMC Canyon problems. The engine may stall when the engine is warmed up. The AC compressor may seize resulting in loss of cold air from the AC vents.

Where is the trouble code on a GMC?

When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.

How does a mechanic diagnose the p2101 trouble code?

The Check Engine Light will be illuminated and the code is set in ECM memory as a fault. The engine will not accelerate and no throttle response will happen. The engine will idle and that is all. The idle may be lower or higher than normal. How does a mechanic diagnose the P2101 code?

What does p2101 mean on a throttle actuator?

P2101 is a diagnostic trouble code (DTC) for “Throttle Actuator Control Motor Circuit Range/Performance”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.