Why are the dome lights not working on my Plymouth Grand Voyager?

Just bought a 99 Plymouth Grand Voyager and there are a few small issues I’d like to try and fix. I guess I should make separate threads for each… First issue at hand, when you open the doors, the dome lights don’t turn on. – The front lights come on if you push them, they just don’t repond to the door.

How to fix common Dodge Jeep door ajar and dome lights on?

COMMON DODGE, CHRYSLER, JEEP DOOR AJAR AND DOME LIGHTS ON FIX!!! – YouTube COMMON DODGE, CHRYSLER, JEEP DOOR AJAR AND DOME LIGHTS ON FIX!!! If playback doesn’t begin shortly, try restarting your device.

Why does the door ajar light stay on after closing the door?

Door Ajar Light Stays On After Closing All The Doors. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why does the dome light not come on when you open the door?

First issue at hand, when you open the doors, the dome lights don’t turn on. – The front lights come on if you push them, they just don’t repond to the door. – If the key is in the ignition, and the door is open, the chime dings, and the “door is ajar” light is on, so the door sensor appears to be working…

What causes the door ajar warning light to stay on?

However, a fault in either the electrical or mechanical components can cause the door ajar warning light to remain on when the doors are closed, and possibly cause the interior lights to remain on. Can I drive with the door ajar warning light on?

What does the ajar light mean on a car?

The door ajar light, contrary to its’ name, does not only mean a passenger door is open. In most vehicles, the warning sounds when the hood is not latched properly, or the trunk or liftgate are not closed properly.

What can I do if my car door is ajar?

Repair any structural causes: Vehicles that have had crash damage to their doors may have switches that don’t shut off properly when the doors are closed. This can also happen to older vehicles, whose doors may have sagged and are out of alignment. A mechanic or a body shop can repair the doors.

Where are the interior lights on a Chrysler?

Speaking of which, the lights mounted in the center of the ceiling ARE NOT manually controllable. However, interior lights located above both sliding doors and 3rd row vent windows (if so equipped) will illuminate manually by pressing on them.

Why do my front lights not come on when I open the door?

– The front lights come on if you push them, they just don’t repond to the door. – If the key is in the ignition, and the door is open, the chime dings, and the “door is ajar” light is on, so the door sensor appears to be working… – My uncle, the prior owner who bought the van new, told me that a few years ago the van suddenly wouldn’t start.

Where are the headlight controls on a Chrysler?

Located to the right of the headlight control dial is a thumb-wheel toggle switch that controls the operation of the interior lights. Normal operation has the switch set to the SECOND detent from the top of the switch, (the second dot above the dimmer area.)

Why do the dome lights not come on when the door is opened?

Dome lights don’t come on when door is opened. Dome light dash push button switch (to the right of headlight switch) is in the extended position. Dome lights will turn on manually if the push button switch (a.k.a. dash light dimmer) is twisted to extreme clockwise position, but in that mode they simply remain on even when door is closed.

How can I get my dome light to turn on?

Step 1. Inspect the dome light switch in front of the dome light fixture. Most dome lights have three settings: “Off,” “On” and “Door.”. If the “Door” option is selected, the dome light will turn on only when the door is opened. Flip the switch to “Door,” and then open the door to test the dome light.

Why are the interior lights not working on my car?

If your interior lights used to stay on for a while after closing your doors, then there is probably some kind of timer module in the circuit. So if your fuses are good, the door jamb switch checks out okay, and everything else seems to be in working order, you may be dealing with a more complex problem.

How do you replace a dome light bulb?

Pull the bulb out of its socket and insert the replacement. Ensure that you use the same type of bulb that’s currently installed. If you aren’t sure what type of bulb it is, bring the old one with you to the automotive parts store. Snap the cover back on and then check the dome light’s operation.

Why are my head lights not working in my minivan?

The problem lies in the FCM, BCM, or the multifunction switch. However, the FCM is the most likely culprit. If one of the lights does NOT work, then you have to check the green wiring connector located at the bottom of the IPM. You want to make sure you’re getting power through the IPM and into the wiring harness.

Where are the headlight terminals on a Chrysler minivan?

The numbers start at the center and count upwards towards the driver’s fender. Attach a wire to the battery + terminal and touch the other end to terminals 3, 4, 5, and 6 one at a time. Check for headlight operation. Terminal 3 is the left low beam, 4 is the right high beam, 5 is the left high beam, and 6 is the right low beam.

What to do if the door ajar warning light stays on?

This can resolve mechanical issues, such as sticky latches and gummed-up switches. Spray the WD-40 liberally, and open and close each door firmly a dozen times, to work the lubricant into the mechanisms. Apply more WD-40 and repeat.

Why are my tail lights still not working?

I Replaced the Light Bulb but the Tail Lights Still Don’t Work. Part of the series: Maintaining a Car’s Electrical System. If your tail lights won’t come on even after replacing a light bulb, this can be because of a few different things.

Why are the lights on my dash not working?

Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.

How does a dei alarm work with a dome light?

I remember on my DEI alarm I installed many moons ago, the alarm was wired into the dome light, so when a door was opened the signal would activate the alarm. You cut the wire and passed it through the alarm controller and as an added bonus it would activate the dome light when you disarmed the alarm.

Is there a problem with the automatic headlights?

This problem is confounded by people’s lack of understanding of how automatic headlights work. With most new vehicles, in an increasing number of countries, even with the headlights turned to the “off” position, the vehicle shows daytime running lights. These are either LED lights or small bulbs in the headlights that are always on.

Why are the dome lights not working on my Plymouth Grand Voyager?