Common questions

Why are the brake lights on my 1996 Chevy Silverado not working?

Why are the brake lights on my 1996 Chevy Silverado not working?

Brake lights on 1996 C1500 stopped working, to include the above cab light as well. Checked and I have no power to the lights (removed left brake light housing and checked continuity). I’ve checked all the fuses. The #1 location 20amp fuse for aux/haz keeps blowing. If I put in a new fuze and turn on the hazard lights it blows.

What to do when your brake lights are not working?

In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.

Where are the brake lights on my car?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.

Why does my brake light work when I Turn on the turn signal?

For that to work, the brake wire runs to the turn indicator, so that when you turn on the flashing turn signal, it switches out the brake light signal for that side so that the two signals don’t collide. So don’t just check the brake light. Also check the turn signals.

Brake lights on 1996 C1500 stopped working, to include the above cab light as well. Checked and I have no power to the lights (removed left brake light housing and checked continuity). I’ve checked all the fuses. The #1 location 20amp fuse for aux/haz keeps blowing. If I put in a new fuze and turn on the hazard lights it blows.

Where is the brake light switch on a Chevy Silverado?

The brake light switch is on the top of the brake pedal. Use a test light to see if you have power on both sides once the pedal is depressed (orange wire) Here are guides to help you get the job done. Here is a wiring diagram to help (below) Please let us know what you find. helpful?

Are there any brake lights that are not working?

Bed brake lights not… The bed brake lights are not working, but all other lights including the center mount brake light are working fine. I checked every fuse in both boxes and all four bulbs and they all appear fine.

Where are the brake lights and tail lights?

In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood.

Why are there no brake lights on my Chevy Silverado?

Not sure what you heard clicking, but the brake light switch would have been the best suspect. Start by measuring the voltage on the orange wire on the brake light switch. If you have that, verify you have twelve volts on the white wire when you press the brake pedal. helpful? The brake light on the cab works but the brake lights on the bed do not.

Why are the brake lights on my bed not working?

The bed brake lights are not working, but all other lights including the center mount brake light are working fine. I checked every fuse in both boxes and all four bulbs and they all appear fine. Since the center mount brake light works when the pedal is pressed it appears that the brake switch is not the issue.

Where do the brake lights go in a car?

The way those taillights work theres a white wire under dash on the column that white wire is for brake light. So the way the brake lights work they go through a relay and through blinker switch.

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

What kind of brake light is not working?

The C/K line includes pickup trucks, medium-duty, and heavy trucks. Same issue . Driver’s side tail light brake light and turn signal not working . Passenger side is working no reverse lights that I know of . Bulbs seem good fuses seem good.

Where are the brake lights on a C / K 1500?

There is a switch. I think on most C/K 1500/2500 it is on the brake pedal arm or the arm hits it. It is $5-$10; you might take ALL your truck data to the auto parts store, buy a new switch, then look for the same thing around the brake arm or under the hood. There’s a fuse. Find the fusebox and look for “brake”. The Owner’s Manual may have clues.

Where are the brake lights on a Chevy C / K 1500?

There is a break light relay I think down under drivers side, or under the hood in the fuse box. Blinkers are working so the circuit is good. 32 people found this helpful. Thanks Rowefast, it was the brake light relay.

Why are my brake lights not working after replacing the switch?

Brake lights still not working after I replaced brake switch. Running lights,blinkers,reverse all work. Fuses in panel good,bulbs good, what else can I check? There is a break light relay I think down under drivers side, or under the hood in the fuse box. Blinkers are working so the circuit is good. 32 people found this helpful.

In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood.

When did the Chevy C / K go out of production?

After the 2000 model year, the fourth-generation C/K was discontinued and was replaced by the GMT800 platform (introduced for 1999); heavy-duty chassis cabs remained in production through 2002. In line with the GMC Sierra, Chevrolet adopted a singular Chevrolet Silverado nameplate for its full-size truck line (which remains in use).

Why does my Chevy k1500 have no power?

I have a 1990 chevy k1500 and i blew up a batter then i lost dash power and my ignition wont engage anything and i have lights but no dash power or hvac controls Did you find the recommended reading relevant to this discussion?

When did the Chevy Silverado 4 generation come out?

Fourth generation (GMT400) Also called GMC Sierra Chevrolet Silverado (1999-200 Production December 8, 1986–1999 (US, two-door and Model years 1988–2000 (standard/extended cab) 1992–2 Assembly Arlington, Texas ( Arlington Assembly) R

Why are my brake and turn signal lights not working?

Having issues with your taillights, brake and turn signal lights or reverse lights? All issues are covered here: fuses, bulbs, bad grounds, broken, burnt or pitched wires and bad connections. Keep your patience, watch the video and we can find it and fix it. Loading…

What to do when your turn signal stops blinking?

Once you scrape/clean them, a little white lithium grease will help prevent corrosion in the future. I cleaned and tightened the ground wires and all his brake/turn signal/parking lights work properly now. You did not say if this happens on just one side or both, but check this and let us know if it fixes your problem.

Having issues with your taillights, brake and turn signal lights or reverse lights? All issues are covered here: fuses, bulbs, bad grounds, broken, burnt or pitched wires and bad connections. Keep your patience, watch the video and we can find it and fix it. Loading…

Once you scrape/clean them, a little white lithium grease will help prevent corrosion in the future. I cleaned and tightened the ground wires and all his brake/turn signal/parking lights work properly now. You did not say if this happens on just one side or both, but check this and let us know if it fixes your problem.

What are the problems with a GM Truck wiring system?

Some wiring system issues are more complex, however: open circuits, short circuits, erosion, repeated blowing fuses, or hot smells from wires or melting plastic. These are obviously serious and can put your truck out of commission, possibly for good.

What causes brake lights to not work but tail lights do?

5 Causes of Brake Lights Don’t Work But Tail Lights Do 1 Bad Light Bulbs 2 Bad Brake Light Switch 3 Broken fuse or fuse box 4 Bad sockets and connectors 5 Broken wire More …

Where is the fuse on the brake light?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.

Why are the brake lights on my Chevy 1500 not working?

I have a 1994 Chevy 1500. Brake lights are not working. I replaced the bulbs and the brake light switch. All the other Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them.

What to do if your brake lights are not working?

Ok, changed out turn signal switch and still have no brake lights. Again, i changed the bulbs, replaced the brake switch, and replaced the turn signal switch. The parking lights work, the blinkers work, the back-up light works, and the hazzards work. But still no brake lights.

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.

There is a switch. I think on most C/K 1500/2500 it is on the brake pedal arm or the arm hits it. It is $5-$10; you might take ALL your truck data to the auto parts store, buy a new switch, then look for the same thing around the brake arm or under the hood. There’s a fuse. Find the fusebox and look for “brake”. The Owner’s Manual may have clues.

There is a break light relay I think down under drivers side, or under the hood in the fuse box. Blinkers are working so the circuit is good. 32 people found this helpful. Thanks Rowefast, it was the brake light relay.

Brake lights still not working after I replaced brake switch. Running lights,blinkers,reverse all work. Fuses in panel good,bulbs good, what else can I check? There is a break light relay I think down under drivers side, or under the hood in the fuse box. Blinkers are working so the circuit is good. 32 people found this helpful.

What should I do if my brake light is not on?

Before you replace the turn signal switch assembly, be sure the hazard switch is fully turned off and is not stuck midway between on and off. To verify this, check for 12 volts on the white wire, (blue arrow), at the signal switch connector when the brake pedal is pressed.

Before you replace the turn signal switch assembly, be sure the hazard switch is fully turned off and is not stuck midway between on and off. To verify this, check for 12 volts on the white wire, (blue arrow), at the signal switch connector when the brake pedal is pressed.

What kind of brake lights are not working?

I have a 1994 Chevy 1500. Brake lights are not working. I… i have a 1994 Chevy… i have a 1994 Chevy 1500. Brake lights are not working. I replaced the bulbs and the brake light switch.

What should I do if my brake light switch blows?

If the fuse is blown and blows again we’ll need to investigate what is causing the circuit to overload. If the fuse checks ok, then check for supply voltage at the brake light switch using a digital volt/ohm meter. If the switch checks ok for power in and out, then there could be a ground concern; corrosion or open circuit.

I have a 1994 Chevy 1500. Brake lights are not working. I… i have a 1994 Chevy… i have a 1994 Chevy 1500. Brake lights are not working. I replaced the bulbs and the brake light switch.

The brake light switch is on the top of the brake pedal. Use a test light to see if you have power on both sides once the pedal is depressed (orange wire) Here are guides to help you get the job done. Here is a wiring diagram to help (below) Please let us know what you find. helpful?

Is the cargo light on my Chevy k1500 working?

Both the dome LED and cargo LED has worked since I installed them in February. I have exposed the wiring for the light switch in the dash and do not see any signs of burnt wires or anything. Do you think the dome light housing could be going bad and causing the issue?

Is the cargo light on in my 1997 Chevy Z71?

Hello, the dome light in my ’97 Z71 all of a sudden will only be very dim if it comes on. I also noticed the cargo light does not come on but the third brake light still works.

Both the dome LED and cargo LED has worked since I installed them in February. I have exposed the wiring for the light switch in the dash and do not see any signs of burnt wires or anything. Do you think the dome light housing could be going bad and causing the issue?

Hello, the dome light in my ’97 Z71 all of a sudden will only be very dim if it comes on. I also noticed the cargo light does not come on but the third brake light still works.

Why are the brake lights on my Chevy not working?

All the other lights work and I should also mention the brake light on the cab is working, the ones in the housing with the reverse light and blinker are the brake lights not working. every light is working, the turn signals, the back-up lights, the tail lights. The only thing not working is the brake lights.

Why are my tail lights not working but brake lights are working?

Burnt out light bulbs – The other reason your tail lights are not working but your headlights are maybe a blown bulb. When the filament inside the bulb breaks it cannot illuminate the gas enclosed within the glass cover. This burnt-out bulb does not affect the circuitry of the light system and it continues to function normally.

Author Image
Ruth Doyle