Common questions

Where to buy Governor solenoid and pressure sensor?

Where to buy Governor solenoid and pressure sensor?

After doing considerable research, not only on this forum but several places on the internet, it seemed my problem wasn’t too difficult? Governor Solenoid and Pressure Sensor. So I bought the parts, filter, new gasket and ATF4 fluid and went to a good local transmission shop in my town.

How much did Mopar sell the Governor solenoid for?

Interesting fact he told me was how Mopar originally sold the governor solenoid and pressure sensor many years ago, maybe when this transmission was newer, and the price was around $400 before they lowered the cost. I guess too many of them were failing and maybe they realized they couldn’t sell them for the same price anymore.

Is there a problem with the 46RE pressure sensor?

It sounds to me like this is a common problem on the 46RE’s and these parts usually solve it. I had the owner of the shop change everything out today and things went fine, but the problem appears to be still there.

Can a governor solenoid and pressure sensor solve a problem?

Governor Solenoid and Pressure Sensor. So I bought the parts, filter, new gasket and ATF4 fluid and went to a good local transmission shop in my town. It sounds to me like this is a common problem on the 46RE’s and these parts usually solve it.

Where is a governor pressure sensor and where is it located?

It is located in the valve body of the transmission. It governs the pressure for the up and down shifts of the transmission. It is number 30 in the picture. If you still need help just reply, if not clickACCEPTwhen we are done. Thanks, JB Ask Your Own Dodge Question Customerreply replied 11 years ago

Interesting fact he told me was how Mopar originally sold the governor solenoid and pressure sensor many years ago, maybe when this transmission was newer, and the price was around $400 before they lowered the cost. I guess too many of them were failing and maybe they realized they couldn’t sell them for the same price anymore.

It sounds to me like this is a common problem on the 46RE’s and these parts usually solve it. I had the owner of the shop change everything out today and things went fine, but the problem appears to be still there.

Can a GM Governor solenoid be replaced at ATS?

Designed to eliminate shuttle shifting, this upgrade replaces the factory governor pressure solenoid with a more reliable GM unit. This kit from ATS includes everything to convert your 47RE or 48RE transmission to the reliable GM governor solenoid.

Can you install pressure solenoid on your truck?

Our experience and the Youtube channel can help you learn how to install products yourself without taking your truck into a shop. This do it yourself attitude is what brought us to Youtube and what could save you money from expensive shop installation fees. Need help fixing that diesel truck in your garage?

Designed to eliminate shuttle shifting, this upgrade replaces the factory governor pressure solenoid with a more reliable GM unit. This kit from ATS includes everything to convert your 47RE or 48RE transmission to the reliable GM governor solenoid.

Can a BorgWarner Governor solenoid be upgraded?

This kit will restore your transmission electronic function to better than factory level. The heavy-duty BorgWarner governor pressure solenoid included in this kit is a huge upgrade over OEM. The added 3-4 accumulator spring in this kit is also a major upgrade.

How much does a pressure sensor on a Dodge Ram cost?

Do the 3-4 accumulator spring while your in there. $4 and 4 minutes. Hasn’t shifted this nicely in years. Excellent item, fixed my shifting issue on my 97 Dodge Ram and even though the Amazon parts Checker said it wasn’t compatible, it was.

How many solenoid pressure sensors are there on Amazon?

Only 14 left in stock – order soon. . . Only 10 left in stock – order soon. . Only 4 left in stock – order soon. . Only 1 left in stock – order soon. . Only 2 left in stock – order soon. . Only 2 left in stock – order soon. . Only 10 left in stock – order soon. . . Only 20 left in stock – order soon. . . Only 1 left in stock – order soon. .

What does governor pressure sensor do?

The governor pressure sensor measures output pressure of the governor pressure solenoid valve. The sensor output signal provides the necessary feedback to the PCM. This feedback is needed to adequately control governor pressure. To function properly, the sensor needs a good ground,…

Where is the governor pressure sensor located?

With that, they can check the whole system. The governor pressure sensor measures output pressure of the governor pressure solenoid valve. It is located in the governor body on the valve body transfer plate.

What is a governor pressure solenoid?

The solenoid is a duty-cycle solenoid, which regulates the governor pressure needed for upshifts and downshifts. It is an electro-hydraulic device located in the governor body on the valve body transfer plate.

What is the governor pressure?

Governor pressure is similar to throttle pressure in that it is a derivative of line pressure but it is generated relative to the speed of the vehicle. Normally the governor is in or near the tail shaft of the transmission. The governor has a set of fly weights (like centripetal advance in a distributor).

Is the line pressure sensor in the solenoid pack?

The line pressure sensor and the TCC variable force solenoid bolt directly onto the valve body and are not part of the solenoid pack. The six shift solenoids look identical, however, two are normally open and four are normally closed.

What kind of Transmission solenoids does Dodge Ram have?

Dodge Ram 2012, Pressure Transducer Switch by Rostra Powertrain®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship…. Dodge Ram 1500 4-Speed 2012, Automatic Transmission Output Shaft Speed Sensor by ATP®.

What happens if you don’t manually shift your solenoid?

If I didn’t manually shift, then the rpm’s would rev up considerably as I accelerated and finally it’d shift into another gear almost with a “slam.” After doing considerable research, not only on this forum but several places on the internet, it seemed my problem wasn’t too difficult?

Where is the shift solenoid on an automatic transmission?

When it’s time to shift, the transmission control unit sends out power or ground to the required shift solenoid, and it causes the solenoid to open and let the transmission oil flow into the valve body, which then shifts to the next gear. The Transmission shift solenoids are located inside the valve body of your automatic transmission.

Can a governor solenoid be changed on a burned transmission?

The governor pressure solenoid contained in this kit is packed in fluid from the factory. This is the only way to ensure they are functioning upon installation, with no sticking valves. It should be noted that changing a solenoid on an already burned transmission will not fix the transmission.

How to change transmission pressure solenoid / filter?

If you’re not looking to pay over a grand to rebuild your transmission (at least that’s what the guy quoted at the transmission shop), try the least expensive route first: Changing the Governor Pressure Solenoid & Governor Pressure Sensor & Filter. It’s not a hard job at all. Only takes a maximum of one hour to complete the job. Loading…

The line pressure sensor and the TCC variable force solenoid bolt directly onto the valve body and are not part of the solenoid pack. The six shift solenoids look identical, however, two are normally open and four are normally closed.

After doing considerable research, not only on this forum but several places on the internet, it seemed my problem wasn’t too difficult? Governor Solenoid and Pressure Sensor. So I bought the parts, filter, new gasket and ATF4 fluid and went to a good local transmission shop in my town.

What does O2 sensor mean on Dodge Ram?

By doing this, the computer and all related sensors go into a sort of learning mode, allowing it to adapt to changes made that could affect airflow or exhaust (O2 sensor) readings. This article applies to the Dodge Ram 2nd Generation (1994-2001).

How can I tell if my transmission solenoid is bad?

To read the trouble codes from the transmission control module, you need an OBD2 scanner to read generic and enhanced trouble codes. Most cheaper ones can only read the codes from the engine control module. If the transmission control unit recognizes any shift solenoid problems, it may cause the transmission to shift very slowly.

How much does it cost to replace a solenoid pack?

A single shift solenoid’s replacement cost is between 100$ to 350$ and a shift solenoid pack costs between 400$ to 700$, including transmission fluid, filter, parts, and labor work. The replacement cost of a shift solenoid replacement depends a lot on what car model and transmission model you have.

Is there an input speed sensor on a Dakota?

The trans code came up as an input speed sensor, I replaced it with no change. Click to expand… There IS no “input speed sensor” on the Dakotas, but there is a P0720: (low output speed sensor; rpm above 15mph)..is that what you saw?

How to know if your Dakota has a transmission malfunction?

TPS malfunction (test with voltmeter, replace TPS sensor if voltage is out of range : 0.5v closed throttle 3.80 t0 4.25v fully open throttle. (ignition on..engine NOT running, sensor still connected to throttle plate shaft, move throttle plates by hand. Voltmeter between center wire on TPS plug and ground.

What kind of shift controls does the Dakota use?

BTW..the Dakota uses the 44re (electronic shift controls) which is based on the old A500 Chrysler transmissions. Click to expand… Click to expand…

Why does my Dakota forumz not shift gears?

Overdrive Check valve/orfice failure – The truck never downshifts, even if you floor it. Click to expand… sets and hence, a front clutch and rear clutch. Normally the governor valve, controlled by the governor solenoid, operated by the PCM will control the shifting of gears at the appropriate rpm.

What are the sensors in a transmission solenoid?

The computer activates various solenoids to achieve this, including shift, TCC, and pressure control solenoids. The engine associated sensors include the TP (Throttle Position) sensor, ECT (Engine Coolant Temperature) sensor, MAP (Manifold Absolute Pressure) sensor, and MAF (Mass Air Flow) sensor.

Where is the output speed sensor located on a transmission?

Output Speed Sensor (OSS) The output speed sensor is mount- ed to the rear of the transmission. It’s an AC generating sensor: A toothed wheel mounts to the output shaft, and rotates past the output speed sensor. The output speed sensor has two wires to it.

The computer activates various solenoids to achieve this, including shift, TCC, and pressure control solenoids. The engine associated sensors include the TP (Throttle Position) sensor, ECT (Engine Coolant Temperature) sensor, MAP (Manifold Absolute Pressure) sensor, and MAF (Mass Air Flow) sensor.

How are speed sensors connected to the engine?

Both sensors are constantly communicating with the engine control unit of the vehicle. The information the engine control unit receives from these sensors will allow it to take the appropriate actions with the functioning of the engine and transmission.

Author Image
Ruth Doyle