Where is the oil filter on a MR2?
Where is the oil filter on a MR2?
The oil filter is on the passenger side of the exhaust manifold, just above the dipstick.
How much oil does a MR2 SW20 take?
Engine Oil
Viscosity: | 10W-30 (Above -18) 5W-30 (Below 10) |
---|---|
Capacity: | 4.1 quarts. (with filter)After refill check oil level. |
Torque: | 14 ft/lbs (Oil Drain Plug) |
What engine does the 1991 Toyota MR2 have?
The regular engine was a 2.2-liter, 130-horsepower four-cylinder. The turbo charged version was 2.0-liters and offered 200 horsepower. It came standard with a five-speed manual transmission, but was available with a four-speed automatic. The 1991 MR2 was rear-wheel drive, with the engine mounted behind the seats.
How much oil does a 1991 MR2 take?
4.5 quarts. (with filter)After refill check oil level.
How much oil does a 3sge take?
System | Capacity (l) | Type |
---|---|---|
3S-GE AT w LSD | 1.00 | Toyota Hypoid Gear Oil SX GL-5 85W-90 |
3S-GE AT w/o LSD | 1.05 | Toyota Hypoid Gear Oil SX GL-5 85W-90 |
3S-GE MT | 1.00 | Toyota Hypoid Gear Oil SX GL-5 85W-90 |
Power steering |
Does the 1991 MR2 have power steering?
Currently, there are no power steering kits for the MR2. From there, three types of power steering designs are rated based on their performance in with the Objectives.
Where is the jack on a Toyota mr2?
The two points on the left and right sides of the car are for jack-stands, or the spring-jack that comes with the car. The points to the front and rear of the car can be used with a car-jack to raise the car so that the car can be lowered on to more robust jack-stands.
How much oil does a 1993 MR2 take?
4.4 quarts. (with filter)After refill check oil level.
What is API SL engine oil?
SL. 2001 Gasoline Engine Service. Category SL was adopted to describe engine oils for use in 2001. It is for use in service typical of gasoline engines in present and earlier passenger cars, sports utility vehicles, vans and light trucks operating under vehicle manufacturers recommended maintenance procedures.