Common questions

Where is the fuse on a Chevy Silverado horn?

Where is the fuse on a Chevy Silverado horn?

NOTE another common issue with these GM trucks is the switch located behind the air bag. BE CAREFUL if you try that because the air bag could explode! This video covers the fuse, relay, and replacement of both horns (driver side and passenger side Loading…

What kind of horn does a Chevy Silverado have?

From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. My 2003 Silverado horn stopped working today.

What to do when your Chevy Silverado horn stops working?

Refer to SIR Disabling and Enabling Zone 3 . <LI type=1>Turn the ignition switch to the ON position in order to unlock the steering wheel. <LI type=1>Turn the steering wheel 90 degrees so the side of the SIR module is at the 12 o’clock position in order to gain access to the access holes behind the steering wheel.

How to replace the horn on a Chevy Silverado?

This video shows how to troubleshoot and replace your horn. NOTE another common issue with these GM trucks is the switch located behind the air bag. BE CAREFUL if you try that because the air bag could explode! This video covers the fuse, relay, and replacement of both horns (driver side and passenger side Loading…

Where is the fuse box on a car?

You can find the instrument panel fuse box under the dashboard of the driver’s side. The lid can easily be removed by pulling it down. Most interior fuse boxes come complete with a plastic fuse puller. If yours is missing, you can use tweezers or needle nose pliers to remove the fuses.

How can you tell if a fuse has blown on an instrument panel?

Figure 4. Instrument panel fuse box. You usually can identify a blown fuse by simply looking at it. If the thin metal strip inside the fuse is intact, then it’s most likely still working. If the thin metal strip has separated, then the fuse has blown.

Why does the fuse keep blowing on my horn?

Q: Horn fuse keeps blowing. If you disconnect both horns and put a good fuse in to check if the fuse blows with them disconnected, then you have another problem with the fuse blowing and not the horns. It’s also possible that you may have another problem like a shorted harness in the steering column and the horn is the first shorted wire.

Where is the fuse block located on a Chevy Suburban?

The fuse block access door is on the driver’s side edge of the instrument panel. Pull off the cover to access the fuse block. fuse box diagram (1995-1999). legend. DRL Relay, DRL Module Buzzer, Headlamp Switch, Keyless Entry, Cluster/Gauges, Low Coolant Module, Convenience Center Electrochromatic Rearview Mirror with Compass

What happens when the fuse breaks on a Chevy Silverado?

If one or more electrical components begins to draw too much power, then the fuse breaks. When this happens, the electrical current that flows through the fuse is interrupted, which protects the affected electrical component and helps prevent it from overheating and/or breaking. There is no one standard fuse, no matter what you drive.

Figure 4. Instrument panel fuse box. You usually can identify a blown fuse by simply looking at it. If the thin metal strip inside the fuse is intact, then it’s most likely still working. If the thin metal strip has separated, then the fuse has blown.

Author Image
Ruth Doyle