Where is the airbag code on a 1996 Chevy?

If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.

Why does the airbag light stay on in my Chevy?

If your Chevrolet airbag light stays on and won’t turn off, it is because the Safety Restraint System (SRS) has detected a problem with one of the airbag components. Two possibilities include damaged wires or low voltage. While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident.

How does the airbag scanner work on a Chevy?

Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port. The port is trapezoid in shape and allows the scanner to plug only in one direction. Turn on the ignition. Do not start the engine. If your Chevrolet has a START/STOP button, press this button without pressing the brake pedal. Allow your Chevrolet airbag scanner to power on.

Where is the VIN on a Chevy airbag?

Chevrolet has issued several airbags recalls over the years. Find your VIN at the lower-left corner of the windshield and call any Chevy dealer to check if any recalls are open. If there is an open recall for your Chevy airbag system, the dealer may fix that problem-free charge if related to the recall.

What to do when your airbag light comes back on?

After you clear the Chevrolet airbag light, turn off the ignition then back on to determine if the airbag light has been reset. Go back to the Airbag / SRS control unit. Scroll down to Clear / Erase Fault Codes and press enter. If the problem hasn’t been fixed, the airbag light will come back immediately or as soon as the problem is detected again.

When does the GM airbag light come on?

The airbag light, or SRS (supplemental restraint system) light, on the GM dashboard shines whenever there is a malfunction with the airbag deployment system. The vehicle needs inspected and fixed to ensure against accidental deployment of the airbag.

How much does a Chevy airbag cost?

You have no items in your shopping cart. You have no items in your shopping cart. and more.. Find the cost of airbags for your vehicle. Airbags range in price from $175 – $475

Where is the button to turn off the airbag light?

This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.

How do you turn on the airbag scanner on a Chevy?

Allow your Chevrolet airbag scanner to power on. The scanner should turn on once the ignition is turned on or to position II. Once the scanner is fully powered, select Chevrolet from the menu. Follow the prompting on the diagnostic scanner to select your model. Next, manually select the AIRBAG SYSTEM.

Who is the owner of the 2004 Chevy Aveo?

2004 Chevrolet Aveo Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, and the CHEVROLET Emblem are registered trademarks of General Motors Corporation. The name AVEO is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed.

How do you adjust the driver’s seat in a Chevy Aveo?

Adjust the driver’s seat only when the vehicle is not moving. Pull up and hold the bar located under the front of the seat to unlock it. Slide the seat to where you want it and release the bar. Then try to move the seat with your body, to make sure the seat is locked into place. 1-2 Driver Seat Height Adjuster

Is the Aveo a trademark of General Motors?

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, and the CHEVROLET Emblem are registered trademarks of General Motors Corporation. The name AVEO is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

What are the trouble codes on a 1996 Corvette?

In addition, ABS/ASR (Anti-lock Brake System/Acceleration Slip Regulation) and EBTCM (Electronic Brake Traction Control Module) trouble codes and data were introduced on the 1992-1996 Corvettes. Although limited ECM data is available, it can point you in the right direction.

Where is the ECM code on a 1994 Corvette?

1994-1996 Corvette ECM, CCM and ASR/EBTCM codes are accessed placing the jumper wire in ALDL connector positions 4 and 12. GM used numerals in place of alphas on all 1994 and up Corvettes at the ALDL. The ALDL numerals start with 1 in the upper left hand position and 9 in the lower left position.

Is there jumper wire for 1994 ALDL corvette?

Our 1994-1996 ALDL has the jumper wire in place ready for CCM interrogation. 1994-1996 Corvettes with the later designated OBDII (On-board Diagnostics) connector use battery voltage for scanner power, so it also has the potential for possible circuit damage. There is no real concern if you are careful during the installation of the jumper wire.

What kind of trouble does a 1993 Corvette have?

Any loose strands could short another terminal. 1990-1993 Corvettes use the first generation ALDL connector. It houses a fuel pump override lead that has battery voltage. This connector position can harm other ALDL circuits if battery voltage is inadvertently jumped to a control circuit.

How much does it cost to reset an airbag light on a Chevy Silverado?

It can cost between $170 to $190 have a defective sensor replaced, this includes labor costs. Before takeng the Silverado to the shop, check the supplemental restraint system fuses and replace them as needed. To reset an airbag on a silverado just put the key into the ignition and turn the switch to the on. Watch for the airbag light to turn on.

Where is the airbag scan port on a Chevy?

Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port. Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port.

How do I Turn Off the GM airbag light?

Use the arrow keys on the face of the scan tool to navigate the menu. Select “Body Control Module,” then “Codes,” then “Clear All Codes.”. This will turn off the airbag light on the GM’s instrument panel. Unplug the computerized scan tool and start the engine.