Where can I buy an AC compressor for a Chevy Silverado?
Where can I buy an AC compressor for a Chevy Silverado?
Shop AutoZone for Chevrolet Silverado 1500 A/C Compressor. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Your Chevrolet Silverado works hard to provide you with the utility, strength and comfort you desire. In order for your Silverado to achieve these things, you have to perform proper maintenance.
How do you remove a Chevy A / C compressor?
But the 3/8 ratchet will still work. Remove the belt by inserting a 3/8 inch ratchet or breaker bar into the square hole on the front of the belt tensioner, pulling against the spring tension then remove the belt. Remove the bracket on the side of the compressor that holds various lines/hoses using a 13mm socket.
Where is the air conditioner port on a Chevy Silverado?
Connect the charging hose to the can of refrigerant and then to the low pressure port of the air conditioning system. On most Silverado models, this port is located on the accumulator: an aluminum cylinder located on the passenger side of the engine compartment. Hold the can of refrigerant upright and slowly open the valve on the charging hose.
What to do if your Silverado air conditioner is not working?
Locate the red 10 amp fuse marked A/C COMP and remove it. If the metal ribbon within the fuse appears burnt or broken, replace the fuse. If the fuse is okay, the next suspect is the air conditioner relay. This relay is also located in the fuse box, though there’s no visible indicator to verify that it’s in working order.
Shop AutoZone for Chevrolet Silverado 1500 A/C Compressor. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Your Chevrolet Silverado works hard to provide you with the utility, strength and comfort you desire. In order for your Silverado to achieve these things, you have to perform proper maintenance.
But the 3/8 ratchet will still work. Remove the belt by inserting a 3/8 inch ratchet or breaker bar into the square hole on the front of the belt tensioner, pulling against the spring tension then remove the belt. Remove the bracket on the side of the compressor that holds various lines/hoses using a 13mm socket.
Why is there no power to a / C compressor?
The AC switch may light up saying the AC is on… but there still may not be a connection from there to the relay. I would take the controls out in the cab and make sure everything is plugged in and nothing is damaged.
What kind of refrigerant does a 2000 Chevy Silverado use?
Note: a U.S. built 2000 model year truck uses R134a refrigerant, not Freon (R12). OK, you’re on the right track. If the system is fully charged (pressure correct), but the A/C compressor clutch does not engage, the fault is electrical.
What should the pressure be on the a / C compressor?
Low side must be over 28 psi and the high side must be under 350psi. If the pressures are good see if you have voltage at the compressor clutch when the compressor shuts off. If you have voltage and a good ground it could be a bad compressor coil.
Why is my a / C not working on my Chevy Silverado?
Subject: Air Conditioning (A/C) Blows Warm Air Intermittently. This condition may be caused by the A/C compressor clutch cycling out early when the low pressure side reaches approximately 380 kPa (55 psi). The fix is to bring the vehicle to the dealer to have the latest software installed into the vehicle.
Where can I get a 2000 Chevy Silverado compressor?
RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. 2000 CHEVROLET SILVERADO 1500 5.3L V8 A/C Compressor | RockAuto
Why is my a / C compressor not engaging in my Chevy Silverado?
RE: Terry, If you have power on 86 and 85 is a confirmed good ground from the PCM and you jumped 30 to 87 and the compressor clutch engages then it is possible the relay is faulty. To check the relay, put 12 volts on 86 and ground 85 then use an ohm meter and check the continuity at 30 and 87.
Note: a U.S. built 2000 model year truck uses R134a refrigerant, not Freon (R12). OK, you’re on the right track. If the system is fully charged (pressure correct), but the A/C compressor clutch does not engage, the fault is electrical.
What happens if the a / C compressor does not engage?
If the system is fully charged (pressure correct), but the A/C compressor clutch does not engage, the fault is electrical. You’re experience as an electrician directed you to first check the basics (fuses), and now it’s time to trace the circuit and determine what we lost (power or ground) and where we lost it.