Where are the fuses on a 2006 Chevy Silverado?

Fuses are inexpensive. Below is the under hood fuse panel for a 2006 Chevrolet Silverado. It’s the same for the entire GMT800 Platform, which includes: The Transmission Control Module is labeled “TCM” it’s easy to find as long as you know the abbreviation.

What happens when a fuse blows on a 4L60E?

The number one symptom that your 4L60E blew a fuse is that it went into limp mode. Limp mode for this particular transmission means that it only has access to second, third, and reverse. When in limo mode you have to manually put it into second gear.

Where is the fuse on the Transmission Control Module?

The Transmission Control Module is labeled “TCM” it’s easy to find as long as you know the abbreviation. Where is the 4L60E fuse? You’ll find the fuse to the 4L60E located under the hood of the car or truck. It won’t be in the fuse panel that you’d think of when looking under the dash. It’s under the hood, usually on the driver’s side.

What to do if transfer case switch does not work?

You have to move onto examining a couple of circuits if the indicators don’t flash. Go on checking the battery positive voltage and ignition voltage. You also have to diagnose the connector of the transfer case shift control switch and the ground circuit for ground.

Why does my Silverado go into limp mode?

It’s not that hard to get to. This can be the problem that is causing your truck to go into limp mode, since the 4L60E will default to limp mode whenever it’s not getting a signal from the TCM. Fuses are inexpensive. Below is the under hood fuse panel for a 2006 Chevrolet Silverado.

Where is the fuse on a Chevy 4L60E?

It won’t be in the fuse panel that you’d think of when looking under the dash. It’s under the hood, usually on the driver’s side. It’ll be pretty easy to find and doesn’t require a lot of effort to open. Most of the vehicles that the 4L60E came in were trucks like the Silverado, Sierra, etc…

Can you test a fuse on both sides?

You can confirm that it’s hot on one side, both sides, or no sides of the fuse. Never trust that a fuse isn’t bad from a visual inspection. A test light is a few bucks. If you don’t have access to a test light, just replace the fuse with a new one anyway.

Where is the fuse block on a Chevy Silverado?

It is located underneath the instrument panel, to the left of the steering column. The fuse block is located in the engine compartment near the front of the vehicle. How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

Where are the fuses on a GMC Sierra?

Fuse 25 is your trailer park lamps. If you don’t want to pull the fuses, you can use a circuit tester like # PTW2993 to check the poles of your fuses on the top for power transfer.

Where are the fuses located on a trailer?

Trailer fuses are found in the underhood fuse block. Fuse 1 is your trailer Right stop/turn lamp. Fuse 3 is your Left stop/turn lamp. Fuse 10 is your trailer backup lamps. Fuse 25 is your trailer park lamps.

Can a 4L60E fuse be blown in limp mode?

That’s because it’s the cheapest and easiest thing it can be, and there’s a good chance that the fuse is actually blown if the transmission is in limp mode. When encountering a blown 4L60E fuse, it’s important to track down what caused it so blow.

Where is the fuse box on a blazer?

The fuse box is located on the driver’s side of the instrument panel, behind the cover. Dome Lamps, Cargo Lamps, Visor Vanity Mirror, Cigarette Lighter, Inside Rearview Mirror Lamp, Overhead Console l-amps, Glove Box Lamp, Horns, Horn Relay, IP Courtesy Lamps, Power Outside Rearv iew Mirror, Liftglass Release Motor, Illuminated Entry Module