What type of material is 410?
What type of material is 410?
stainless steel
General Properties Alloy 410 (UNS S41000) is a 12% chromium martensitic stainless steel plate that can be heat treated to obtain a wide range of mechanical properties. The alloy has good corrosion resistance along with high strength and hardness.
How do you harden 410 stainless steel?
Heat to 1750-1850°F, soak at heat, and quench in oil. Light sections will also harden by air cooling. 410 will harden to some degree when heated 1500°F and over unless slowly cooled to below the critical temperature.
What is the hardness of 410 stainless steel?
Heat Treatment
| Heat Treatment | T410 (0.14%C) Hardened 1800°F (982°C) | |
|---|---|---|
| Rockwell Hardness | UTS, Ksi (MPa) | |
| Annealed* | 81 HRB | 80.4 (554) |
| Hardened & Tempered 400°F (204°C) | 43 HRC | 202.9 (1399) |
| Hardened & Tempered 550°F (288°C) | 40 HRC | 187.0 (1289) |
What is UNS S41000?
410 Stainless Steel UNS S41000. Type 410 is a martensitic stainless steel that provides good corrosion resistance plus high strength and hardness.
Is 410 stainless steel safe?
When compared to austenitic grades of stainless steel, alloy 410 is less-corrosion resistant, but is proven to withstand the effects of atmospheric conditions, water, mild chemicals, and the acids found in food. The alloy also exhibits good heat and oxidation resistance.
Is type 410 stainless steel magnetic?
Description. Type 410 is a martensitic stainless steel that provides good corrosion resistance plus high strength and hardness. It is magnetic in both the annealed and hardened conditions. A wide range of properties can be achieved with different heat treatments.
What do you need to know about ASTM a276?
ASTM A276 specification covers requirements such as chemical composition, mechanical properties, heat treatment and other supplementary requirements for 410 stainless steel round bars, square bars, hexagon bars and other extruded shapes. …. …. …
What kind of fastener is ASTM a276 type 410?
ASTM A276 Type 410 is a material grade specification for cold-finished or hot-finished bars in 410 stainless steel, available in form of rounds, square, hexagons and other hot rolled extruded shapes.
What are the properties of AISI 410 stainless steel?
AISI 410 stainless steel is one of the most commonly used martensitic stainless steels. It contains about 12% Cr and therefore provides moderate corrosion resistance. Unlike austenite such as AISI 304and AISI 316, martensite such as grade 410 is magnetic and can be hardened by heat treatment like carbon steel and low alloy steel.
What are the physical properties of SS 410?
SS 410 Physical & Thermal Properties Density, g/cm3 (lb/in3) 7.9 (0.29) Melting point, °C (°F) 1480-1530 (2700-2790) Magnetic permeability 700-1000 Specific heat capacity, J/kg·K (Btu/lb · 460 (0.11) at 20 °C (68°F) Electrical resistivity, μΩ·m 0.57 at 20 °C (68°F)
