Common questions

What to do if your Chevy Impala says no start?

What to do if your Chevy Impala says no start?

With the key held in the “start” position, you should test for power to the starter motor. If there is power (and no voltage drop), but no starter operation, then the starter motor/solenoid assembly is faulty.

Why does my Hyundai Getz crank but not start?

Check the spark. Without spark to ignite the fuel mix in the combustion chamber, the engine will not start. It will turn over or “crank over” but will never actually run. Spark issues are not limited to the plugs. Check the spark plug wires, the distributor or module, and plug gap.

Why does my 2013 Chevy Spark not start?

There are a number of issues that can go wrong with starting system and make your 2013 Chevrolet Spark car won’t start or hard time to start – This article guides you through some of the facts behind the starting system, and the components that may be to blame, and tells you what action you can take to try to remedy each situation.

What kind of battery does a Chevy Impala have?

I have a 2007 Chevy impala with approx 156,XXX on it. The car was sitting for a couple of weeks, and when I went to start it again, the battery was completely dead, no power to anything. I replaced the battery with an OEM spec battery, and now it won’t crank or start at all.

With the key held in the “start” position, you should test for power to the starter motor. If there is power (and no voltage drop), but no starter operation, then the starter motor/solenoid assembly is faulty.

Why does my Avalanche keep cranking the starter?

Yes if by the start position you mean the position the key is in when the starter is cranking. I do not know how long it would keep cranking because I quickly move the key back out of concern it might damage the starter or something else. The frustrating thing is it only does it SOMETIMES and it has never done it yet when a mechanic has tried it.

I have a 2007 Chevy impala with approx 156,XXX on it. The car was sitting for a couple of weeks, and when I went to start it again, the battery was completely dead, no power to anything. I replaced the battery with an OEM spec battery, and now it won’t crank or start at all.

What does it mean when your car won’t start?

Some say ignition switch in the steering column; others say starter/solenoid; others say electrical problem such as a relay. Problem is it only does it sporadically and it never does it when I take it to the shop. Anyone have an idea what the problem is ? Thanks in advance for any help on this.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

What to do if your car won’t start?

On the other hand, with the key in the “start” position, if there is no power to the starter, then the circuit is traced until the fault in the circuit is found.

Why does my Car Crank but not start?

In a ‘cranks but does not start’ problem, the starter motor will engage and crank the engine but the engine will not start. For the most part, the engine will not start because it’s either not getting fuel, or it’s not getting spark, or it’s not getting air (like in an engine compression problem).

How to diagnose a no start engine problem?

The engine is not getting fuel. The engine is not getting spark. The engine has cylinder compression problems. This boils down to doing 3 basic tests to get to the bottom of the no start problem. We need to: Test The Ignition System: We need to make sure that each cylinder is getting spark with a spark tester.

What does it mean when your car says no start?

With the key held in the “start” position, you should test for power to the starter motor. If there is power (and no voltage drop), but no starter operation, then the starter motor/solenoid assembly is faulty. If there is no power, then the electrical circuit supplying the motor has a fault.

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

Why is my power window not working on my Impala?

Pop out the rubber boot toward the door and slide inside the door so you can see the wires and check the black ground wire is most likely broken. It is a broken wire in between the door and the fender. In that rubber boot.

Why is the sunroof not working on my Impala?

I have an 04 impala, yesterday the windows rolled down, now all stopped working at same time. I saw in owners maual that a relay controls windows AND sunroof. the Sunroof still works. I dont know what else to check. Thanks

On the other hand, with the key in the “start” position, if there is no power to the starter, then the circuit is traced until the fault in the circuit is found.

What happens when there is no power in a jeep?

If there is no power, then the electrical circuit supplying the motor has a fault. That circuit begins at the battery and includes grounds, wiring (some of which is very heavy cabling), fuses, relays, the ignition switch and terminations.

Why is the PassLock on my Chevy Impala not working?

You are not alone because many many people have been kept out of thier OWN cars because of this defective system. This part will bypass the whole security system so you never have trouble again. Worth checking out for sure. Read reviews of repair shops in your area.

Is there a bypass module for the Chevy Impala?

There is a bypass module you can buy for any chevy impala made before 2007. What I found out about the 2007 and later models is they changed the wiring so it cannot be bypassed you have to take it to the dealer to have it repaired. Sounds like GM knows what its doing to make more money on a failing passlock security system.

You are not alone because many many people have been kept out of thier OWN cars because of this defective system. This part will bypass the whole security system so you never have trouble again. Worth checking out for sure. Read reviews of repair shops in your area.

There is a bypass module you can buy for any chevy impala made before 2007. What I found out about the 2007 and later models is they changed the wiring so it cannot be bypassed you have to take it to the dealer to have it repaired. Sounds like GM knows what its doing to make more money on a failing passlock security system.

What are common reasons my Chevrolet Impala won’t start?

What are common reasons my Chevrolet Impala won’t start? While there are a variety of reasons your Chevrolet Impala won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.

With the key held in the “start” position, you should test for power to the starter motor. If there is power (and no voltage drop), but no starter operation, then the starter motor/solenoid assembly is faulty. If there is no power, then the electrical circuit supplying the motor has a fault.

What can cause a car to not start?

In addition to a faulty ignition switch, faults can include high resistances, due to corrosion, wire strand breaks, or loose terminals, which can only be diagnosed using a voltage drop test.

In addition to a faulty ignition switch, faults can include high resistances, due to corrosion, wire strand breaks, or loose terminals, which can only be diagnosed using a voltage drop test.

What is the fault code for a Chevy Impala?

The contact stated that the failure was intermittent. The vehicle was diagnosed by an independent mechanic and fault code: p-2135 was retrieved. The mechanic replaced the ecm, throttle body, accelerator pedal mechanism, and the wiring harness between the ecm and throttle body; however, the failure recurred.

Are there any problems with the 2016 Chevy Impala?

Another incident I was driving came to a red light as I was waiting for my green light my car shut off while I had my foot on the break I put the shift gear I to park turned the ignition on and car started. See all problems of the 2016 Chevrolet Impala .

What does code 16 mean on an Impala?

CODE 16″ pull the code again. pretty sure it will be Pxxxx or something…. The Engine Control Module monitors system voltage internally. If system voltage becomes too high or too low, electrical devices on the vehicle may not function properly. They could also be damaged. * The engine runs poorly or stalls due to low system voltage.

What should I do if my Chevy Impala remote start is not working?

Turn the ignition to ACC or ON and the radio to off. Do not crank the engine. 2. Press and hold the DISP button on the radio for at least five seconds until settings is displayed. 3. Press the SEEK up or down arrows until FOB PROG appears on the display. 4. Press the PREV or NEXT button to enter the submenu. The current selection will have an

When did my Impala run out of gas?

The car was running perfect…i havent driven it since October while working on the interior …when i parked it there was around 1/8th of a tank of gas…Ive started the car one a week since …..last week i pulled the car out and let the car run to charge up the battery….well it ran out of gas….

Why does my Impala die after a few seconds?

Then if it stall again , i would check if the fuel pressure stay at the same pressure when the engine is running , it could be a fuel flow problem, clogged pump or something. But on another note , i have a mercedes that was doing the same when i bring it out of storage last year, it would start , then die after 5 , 10 secs.

What happens when the starter fails to start?

Starter motor failure produces one common symptom across all makes and models: When you turn the key, the starter solenoid will click, but the engine will not rotate. You also Read More When the computer senses the engine is out of time, it will turn on the check engine light. The engine may stall or even just fail to start.

What does it mean when Battery won’t start?

The battery is considered dead when there isn’t enough charge to start the engine or run electrical components. Normally, the first sign is dim lighting in the interior of the Read More

Why is my Chevy Silverado 1500 not starting?

However, today, when the truck will crank and start, the antitheft icon goes off after a few seconds with the key on and stays off while the truck is running. It never flashed either today or yesterday though. And I don’t know if the antitheft system disables cranking or starting or both.

An intermittent no-start condition references any time where starting is possible sometimes, and other times the engine will not start. This implies that the difference between starting and failure to start is not understood.

Why are all my windows on my Impala not working?

Click to expand… Check for power at the dark blue wire in the 6way flat connector with key on. Check with lockout switch on and off. It should change when you change position of lockout switch. If it does its a wiring/connection issue, if it doesn’t you’ve got a bad switch. Same problem – all four windows stopped at the same time.

I have an 04 impala, yesterday the windows rolled down, now all stopped working at same time. I saw in owners maual that a relay controls windows AND sunroof. the Sunroof still works. I dont know what else to check. Thanks

Where is the fuse block on a Chevy Impala?

Some electrical equipment can damage your vehicle or can keep other components from working as they should. The fuse block is located on the passenger’s side of the vehicle under the instrument panel. Automatic Transmission Shift Lock Control Solenoid (with Floor Shifter), Inside Rearview Mirror, Sunroof Motor

Click to expand… Check for power at the dark blue wire in the 6way flat connector with key on. Check with lockout switch on and off. It should change when you change position of lockout switch. If it does its a wiring/connection issue, if it doesn’t you’ve got a bad switch. Same problem – all four windows stopped at the same time.

Some electrical equipment can damage your vehicle or can keep other components from working as they should. The fuse block is located on the passenger’s side of the vehicle under the instrument panel. Automatic Transmission Shift Lock Control Solenoid (with Floor Shifter), Inside Rearview Mirror, Sunroof Motor

Why does my car not start when I turn the key?

A low or bad battery can be easily tested with a standard ohm meter or at any auto repair shop or parts store (they usually do this free of charge). A loose battery cable connection is often the simplest of causes for a non-start. A bad starter solenoid means replacement is needed. Similarly, a bad starter is likely going to require replacement.

What happens to the engine when you turn the key?

Turning the engine causes the pistons to rise and fall in the engine block, activates fuel and spark, and (hopefully) ignition of the engine so that it begins running on its own without the starter motor turning it.

Why does the keyswitch not turn the starter?

They keyswitch may not be sending the signal to tell the battery to send juice to the starter, the battery may not be able to send enough power to the solenoid to turn the starter, the solenoid may not be ramping up the power given to it, or the starter may not be functioning and able to turn.

If there is no power, then the electrical circuit supplying the motor has a fault. That circuit begins at the battery and includes grounds, wiring (some of which is very heavy cabling), fuses, relays, the ignition switch and terminations.

Author Image
Ruth Doyle