What to do if your check engine light says p0014?

Check to see if there are any other codes along with P0014 and clear your Check Engine Light with FIXD. Check the engine oil level and condition. If it’s low, adjust to spec and test drive to see if the concern is resolved. If it’s dirty, change the oil and filter and test drive to see if the concern is resolved.

What does the trouble code p0013 mean after an oil change?

Trouble codes P0013 or P0014 Equinox after an oil change refer to components of the variable valve timing mechanism. To vary camshaft timing, GM uses a solenoid to pulse oil pressure to the VVT. It determines the pulse rate based on engine temperature and desired speed and acceleration. But it assumes you’ve used the recommended oil viscosity.

What causes a p0013 code on an equinox?

A P0013 trouble code can cause the P0014 code to appear, so direct your attention to the P0013 code first. Remove the exhaust solenoids and check for sludge or metal particles. If you see sludge, you’ve got problems.

What does it mean when code p0014 is set?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0014? What Is The Cause Of Code P0014?

What does the code p0014 on a check engine mean?

The check engine light is on and you’ve checked the code with an OBD-II scanner. The result was P0014. What now? What does the code P0014 mean? How do you fix it? What Does the Code P0014 Mean? P0014 is a diagnostic trouble code related to the variable timing of valves in the engine.

What are the possible causes of a p0013 Chevy?

P0013 CHEVROLET Possible Causes. Dirty Oil. Low engine oil level. Faulty Exhaust Camshaft Position Actuator Solenoid. Exhaust Camshaft Position Actuator Solenoid harness is open or shorted. Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection. Faulty Engine Control Module (ECM)

What does the DTC code p0013 stand for?

What Does the P0013 Code Mean? Diagnostic trouble code (DTC) P0013 stands for “Exhaust “B” Camshaft Position Actuator Circuit/Open (Bank 1). It’s a generic OBD-II code that relates to the variable valve timing (VVT)—also known as variable camshaft timing—components.

What causes an exhaust camshaft position actuator code p0013?

Here are the most common causes of an exhaust camshaft position actuator solenoid valve control circuit problem or code P0013: 1 Bad VVT solenoid (aka oil control valve) 2 Problems with the VVT solenoid control circuit 3 Issues with the PCM, such as a pending software update

How to find the p0014 position on a camshaft?

Type A code there is something else. P0016, P0017, P0018, P0019, P0335, P0336, P0338, P0341, P0342, P0343, P0346, P0347, P0348, P0366, P0367, P068, P091, P092, P093, P0521, P0522, P0523 If the initial P0014 sets and other codes are present then erase all codes and do five camshaft drive cycles and then re-investigate which codes come back.

Why does my Saturn Outlook have a p0014 code?

If the valve does not respond to the criteria of the computer, it will recognize the algorithm. So, usually when the P0014 code shows it is failure due to lack of maintenance. Most P0014 codes are almost always a result of bad oil changes and lack of car maintenance in regards to engine lubrication. 2007 Saturn Outlook 3.7. 140000 miles.

What does trouble code p0014 mean on a car?

How does the p0014 camshaft position actuator work?

P0014 Description. The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module.

Why does the Chevy Captiva p0014 throw the cam?

This is because the camshaft actuators use hydraulic energy to move. VVT uses camshaft actuators to adjust the position of the cam. When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown.

What does p0401 insufficient EGR flow mean?

P0401 Insufficient EGR Flow 1 Technical Description. What does that mean? 2 Symptoms. You may notice drivability problems such as pinging (a.k.a. 3 Causes 4 Possible Solutions. In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return.

What does the error code p1409 stand for?

Error Code P1409 is defined as EGR Vacuum Regulator Solenoid Circuit Malfunction. This error code refers to a test to check the electrical function of the EGRVR (Exhaust Gas Recirculation Vacuum Regulator) solenoid.

Why does my check engine light say p1409?

Aside from the activation of the Check Engine light and the registry of the Error Code P1409 into the system, vehicles affected with this error code usually experiences pinging problem, which makes sense for vehicles with EGR valve issue. Other symptoms typically include: Many factors may cause this error code to arise.

How does a mechanic diagnose the p0409 trouble code?

P0409 has a few typical symptoms. In all cases the Check Engine Light will be seen on the dashboard. The vehicle may experience a lack of power and a ping noise under heavy use. In some cases no adverse symptoms are noticed other than the Check Engine Light. How does a mechanic diagnose the P0409 code?

What does p0175 mean on a check engine light?

P0175 is a diagnostic trouble code (DTC) for “P0175 System Too Rich (Bank 2)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic for $0.00.

What to do if your check engine light says p0014?