What should fuel pressure be on a 1997 Chevy c1500?

Pressure should be 55-62 minimum according to GM. Probably pump, pressure regulator i did another fuel pressure test, KOEO, this time with the return fuel line blocked off. my pressure went to 55psi til the pump stopped and then still dropped to 20psi. does that tell me its not the pump??? anyone??

Can a fuel pump crank while the engine is cranking?

So, the very first thing you need to do is to verify that the fuel pump is delivering at least 50 PSI of fuel pressure while the engine is cranking. Yes… while the engine is cranking. Locate the Schrader valve on the fuel line that connects to the ‘Spider’ assembly.

Can a 1997 Chevy c1500 5.7L start?

1997 Chevy C1500, 2WD, 5.7L won’t start – cranks fine. No codes – good fuel pressure ( 60+ psi – new pump), good spark, 1997 Chevy C1500, 2WD, 5.7L wont start – cranks fine. No… It will not start. I changed the fuel filter and fuel pump It will not start.

Can a fuel pump cause a no start condition?

CASE 1: If your fuel pressure gauge read 50 PSI or more as the engine cranked. This means that the fuel pump on your 4.3L, 5.0L, or 5.7L is OK and not the cause of your No Start Condition. The next step is to observe the fuel pressure gauge’s needle (after your helper stopped cranking the engine).

Where is the injector coil on a GM Vortec?

The injector coil is located in the central ‘spider’ with a tube sending the injected fuel to a poppet nozzle in the port of each cylinder. These poppet nozzles require >45psi fuel pressure to open when working properly.

What happens when the fuel injector starts leaking?

So, when the fuel pressure regulator (or a fuel injector) is leaking, the fuel pressure will drop down to 0 PSI as soon as you turn the engine off (and if this happens, then you know that you have a problem). Therefore, very first thing you need to do is a fuel pressure leak down test with a fuel pressure gauge.

What does 0 psi mean on fuel gauge?

CASE 2: The fuel pressure gauge’s needle DID drop down to 0 PSI immediately after the Key was turned to the Off position: This tells you that there is something leaking inside the plenum. More than likely, it’ll be the fuel pressure regulator, to make sure go to: TEST 2.

Where is the Maxi injector on a Chevy truck?

The MAXI injector is mounted in the center of the intake manifold on the 4.3L engine, and is hidden inside the split plenum manifold. Instead of spraying fuel directly into the manifold like a throttle-body injector, the MAXI injector routes fuel into six nylon fuel lines that have poppet-style spray nozzles on the end.

How does the fuel injector work on a Chevy truck?

Instead of spraying fuel directly into the manifold like a throttle-body injector, the MAXI injector routes fuel into six nylon fuel lines that have poppet-style spray nozzles on the end. When the pressure inside the lines reaches the opening pressure of the poppet valves (43 psi), fuel sprays out of the nozzles into the engine’s intake ports.

What was the fuel pressure on a GMC pickup?

The fuel pump required 12 lbs of fuel pressure per square inch. The minimum flow was 29 gallons per hour, while 12 volts was the minimum current requirement. The fuel pump was located inside the gas tank. Fuel Pumps: 1985-1990 GMC S15 Pickup Fuel Pump 4 Cyl. 2.5L (E) T.B.I.

What should the fuel pressure be on a 1998 Chevy Silverado?

Fuel Pressure Specification The fuel pressure specification for the 1998 Chevrolet Silverado truck is from 55 to 61 lbs. per square inch (psi) for models equipped with the 4.3-liter V-6. Trucks with either the 5.0-liter or 5.7-liter V-8 should have fuel pressure between 60 and 66 psi.

What was the minimum fuel pressure for a GMC Caballero?

The minimum flow was 29 gallons per hour and 12 volts was the minimum current requirement. The fuel pump was located in the gas tank. The GMC Caballero used a six-cylinder 4.3-liter engine from 1986 to 1987. This engine’s fuel pump required 12 pounds of fuel pressure per square inch.

How can I check the pressure of my fuel pump?

There are two ways to tap into the fuel line to see how much pressure the fuel pump in producing. One method involves removing the fuel filter and using an adapter, that has a Schrader valve on it, in its place. You then connect your fuel pressure test gauge to this adapter.

What are the symptoms of a bad fuel pump?

Symptoms Of A Bad Fuel Pump. Where To Buy The Fuel Pump And Save. TEST 1: Using Starting Fluid. TEST 2: Fuel Pressure Test With Gauge. Which And Where To Buy A Fuel Pressure Gauge. More GM 4.3L, 5.0L, 5.7L Tutorials. You can find this tutorial in Spanish here: Cómo Verificar La Bomba de Combustible en Los Sistemas TBI (at: autotecnico-online.com ).

What should the fuel pressure be on a TBI 350?

WRONG – tbi is 11 to 14 lbs pressure stock! A stock tbi injector can go up to about 30 psi though:flipoff2: TBI’s max out around 30 psi, operating pressures are lower. Pressures in the 50-70 range are common in the later model CSFI & CPI vortec engines.

What should the fuel pressure be on a GM 4.3L?

This is where you’ll connect your fuel pressure gauge (the first photo, in the image viewer, is of a 4.3L, and the second of the V8 engine). NOTE: In case you’re wondering, the factory manual specifies that the fuel pressure for the CSFI system should be between 56-62 PSI. The CPI system’s fuel pressure should be between 60-66 PSI.

What should the fuel pressure be on a CPI?

The CPI system’s fuel pressure should be between 60-66 PSI. The manual doesn’t specify if this pressure is key on engine off, only that this pressure should be maintained ‘ under all operating conditions’.

What should the fuel pressure be on a Chevy Silverado?

What should the fuel pressure be on a 5.0 liter V-8?

Trucks with either the 5.0-liter or 5.7-liter V-8 should have fuel pressure between 60 and 66 psi. As long as the fuel pressure is within the normal range, the fuel system is likely operating normally. If the fuel pressure is low, common symptoms include rough idling and engine hesitation.

What should the fuel pump pressure be to start the engine?

The fuel pump produces much more than just 50 PSI of course but the bare minimum the engine needs to start is 50 PSI. Anything less and it will crank for ever before it starts or not start at all. So, the very first thing you need to do is to verify that the fuel pump is delivering at least 50 PSI of fuel pressure while the engine is cranking.

Can you test the fuel pump on a GM Truck?

And although GM did not include a Schrader valve to which you could connect a fuel pressure gauge, it can be tested with one to find out if the fuel pump is producing the correct pressure (or not).

What’s the fuel pressure on a 97 Vortec?

My 97 runs good but some hard cold weather starts. I just changed my fuel filter last year and the old filter seemed fine (was able to blow air though) I checked my fuel pressure and its 59-60 key on engine off and 52 at idle, jumps to 60-62 after blipping throttle.

What’s the fuel pressure on a Chevy truck?

I have a ’97 Chevy 1500 Truck with a 5.7 Liter engine. It had a no start issue, I replaced the fuel pump- the fuel rail pressure was 42 lbs. When I replaced the fuel pump, at Key On Engine Off, the fuel pressure was 60 lbs and held for 30 seconds. I didn’t perform a 2-3 minute pressure hold test.

And although GM did not include a Schrader valve to which you could connect a fuel pressure gauge, it can be tested with one to find out if the fuel pump is producing the correct pressure (or not).

What is the PSI of the fuel pump?

If the fuel pump relay IS NOT activating the fuel pump, the fuel pressure test gauge will register 0 PSI when cranking the engine. If the fuel pump relay is activating the fuel pump, then it’ll register about 56-62 PSI even if the engine does not start.

What should fuel pressure be if fuel pump is not activating?

How to test a GM 4.3L fuel pump?

More GM 4.3L, 5.0L, and 5.7L Tutorials. It’s very important that you start off your fuel pump relay diagnostic by first testing the fuel pump pressure with a fuel pressure test gauge. If the fuel pump relay IS NOT activating the fuel pump, the fuel pressure test gauge will register 0 PSI when cranking the engine.

What was fuel pressure when I replaced the fuel pump?

It had a no start issue, I replaced the fuel pump- the fuel rail pressure was 42 lbs. When I replaced the fuel pump, at Key On Engine Off, the fuel pressure was 60 lbs and held for 30 seconds. I didn’t perform a 2-3 minute pressure hold test.

What should the fuel pressure be on a 4.3L Vortec?

The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start. The fuel pump produces much more than just 50 PSI of course.. but the bare minimum the engine needs to start is 50 PSI…

What should fuel pressure be on GM 4.3L Vortec?

You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 4.3L, 5.0L, 5.7L) (at: autotecnico-online.com ). The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start.

How can I Fix my Chevy fuel pump?

Ask a Chevy Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. My Chevy has no power to fuel pump. How can I fix it? no power to fuel pump… Submitted: 10 years ago. Category: Chevy

Where is the power wire on a Chevy fuel pump?

Want to make sure its a 5.7L engine with the classic style truck and not the new style truck with the 6.0L Right? On the fuel pump connector, the gray wire is the power wire. The thick black wire is the ground.

Which is a symptom of a fuel pump problem?

Another symptom of a problem with the fuel pump is engine performance issues. As the fuel pump is what supplies the vehicle with the fuel required for combustion to occur, any issues with it can affect the engine’s fuel supply and cause issues.

How does a fuel pump work on a Chevy c1500?

When you need a replacement, swap your Chevrolet C1500 fuel pump for a high-performance and fit-tested component from AutoZone. The fuel pump is a vital element of your Chevy’s internal combustion engine system. When the fuel pump directs fuel from the fuel tank to the engine, the fuel is then burned to generate power to propel your vehicle.

Why is the fuel pump and relay not working?

The ignition circuit, which includes the ignition switch, controls power to many components, including the fuel pump and relay. If there is an issue with the switch or the circuit, perhaps a wiring problem, then power to the fuel system may be cut off.

What to do if your fuel pump loses power?

Electrical wiring issues can be a nightmare if you don’t have the appropriate wiring diagrams to see which wires go to where. A mechanic, such as one from YourMechanic, will have access to the proper schematics to help you diagnose this your fuel pump’s loss of power and have your car safely back on the road.

How does the computer connect to the fuel pump?

To activate the fuel pump the computer actually connects one of the ground wires to complete the circuit and send power to the fuel pump. The wire coming from the fuel pump is the other ground wire. Electrical wiring issues can be a nightmare if you don’t have the appropriate wiring diagrams to see which wires go to where.

What should fuel pressure be on a 1997 Chevy c1500?