What kind of oil does a wa320 wheel loader use?

Komatsu question on a wa320-3 wheel loader. hydraulic oil… I have a Deere 310D 4WHD backhoe. Hydraulics all work, but I have a John Deere 310D 4WHD backhoe. Hydraulics all work, but unit won’t move forward or reverse. Oil drips from the bell housing.

What kind of oil do you use for Komatsu hydraulic fluid?

I put 5 gallons of 10w in our PC78 last week,per the Komatsu dealer’s advice, which is where I bought the fluid. If this helps? In hot climates like Australia , hydraulic oil can get very thin . I have used 15W40 engine oil with great success in the excavators i have owned .

How does a hydraulic system work on a loader?

A powered hydraulic system (or circuit) provides the necessary power to lift not only the load, but also the weight of the bucket and arms. When there are problems with the hydraulic power, there are three main components to inspect for trouble: the hydraulic pump, the high-pressure hydraulic lines and the hydraulically actuated piston.

What kind of oil should I use in my Komatsu mini excavator?

what type (weight) oil should I use in the hydraulic system of a komatsu mini excavator? some information is showing standard hydraulic oil and some are showing 10w or 30w non-detergent motor oil….. First check the owners manual if you have one, then a dealer, failing that I would think an ISO 64 or 46 hydraulic oil would suffice.

What kind of engine does the Komatsu wa320 have?

Back-up alarm Back-up lamp Batteries, 112 Ah /2 x 12 V Bucket positioner Counterweight Directional signal Engine, Komatsu SAA6D107E-1 diesel Engine shut-off system, electric Fuel prefilter with water separator Hydraulic-driven fan with reverse rotation Lift cylinders and bucket cylinder Loader linkage with standard lift arm

Is there a problem with the transmission on a Komatsu bulldozer?

Hi I have a komatsu d475-2 bulldozer. It has hydraulic oil getting into the transmission. It only seems to go through then the motor is running. … read more Hi I have a 2005 Komatsu WA320 I want to know where the gears are located on the inside.

What kind of oil does a John Deere loader use?

On the loader arm is written 55b, but tag says 55 CA. It has a 6 … read more on a John Deer 644-A loader the hydraulics for the loader stopped working and sounds like striped splines when loader lever is pulled. I … read more Vocational, Technical or Tra… I have a komatsu pc300-6 and there is too much oil in the slew.

How does the Komatsu wa320-7 wheel loader work?

The WA320-7 provides Komatsu SmartLoader Logic, a fully automat- ic engine control system. Without interfering with normal operations, this technology acquires data from various sensors in the vehicle and delivers optimal engine torque for each work phase.

What kind of fuel prefilter does a wa320 Komatsu use?

Fuel prefilter with water separator Hydraulic-driven fan with reverse rotation Lift cylinders and bucket cylinder Loader linkage with standard lift arm Main monitor panel with EMMS (Equipment Management Monitoring System) PPC fingertip control, mono lever

Where are the gears located in a 2005 Komatsu wa320?

It has hydraulic oil getting into the transmission. It only seems to go through then the motor is running. … read more Hi I have a 2005 Komatsu WA320 I want to know where the gears are located on the inside. Gear 1,2,3,&4.

What kind of oil does a wa320 wheel loader use?