What kind of oil does a 2009 Ford F150 use?
What kind of oil does a 2009 Ford F150 use?
For Ford F-150s the best type of oil is 5W-20. Anything heavier can result in severe complications. All Ford-F150s manufactured from 2004 to 2014 will take this type of oil; the exception is the Ford F-150 with an Ecoboost 3.5L V6 engine. These engines need the slightly heavier – 5W-30 oil.
What weight oil does a 5.0 F150 take?
The 3.5L V6 calls for SAE 5W-30 and holds 6 quarts, Lastly the 5.0L V8 engine uses SAE 5W-20, with an oil capacity of 8.8 quarts.
What happens if I put 10W30 instead of 5W20?
Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.
What kind of oil is in a 2009 Ford F-150?
SAE 5W-20 oil provides optimum fuel economy and durability performance meeting all requirements for the 2009 Ford F-150. The oil capacity for the 4.6L engine is 6.0 quarts and the 5.4L engine oil is 7.0 quarts. Open hood. Sticker under neath
What kind of oil do you put in a Ford truck?
Ford specifies the weight (5W-20, 15W-40, etc.) and the specification that the oil must meet in the manual. The recommended oil weight is also shown on the oil fill cap. Some engines, especially diesels, specify a lighter oil in cold weather. This requirement is pretty much obsolete in gasoline engines. Figure 1.
What’s the best oil weight for a Ford F-150?
Unless you can hear the belt, which oil viscosity will not fix, 5w-20 is going to be just fine. If you really are set on going to 5w-30, go mobil 1 full syn. Get some blackstone testing done on your first couple oil changes and adjust (fix parts) accordingly if needed.
Why does the Ford 5W20 have a high volume of oil?
They had to make some design decisions with modular engines due to the thin oil. 5w20, being thinner, gets hotter, and that’s why Ford had to go with a high volume oil pump and higher capacity oil pans than previous engines (6 quarts on the 4.6L and 7 on the 5.4L).
What kind of oil should I run on my Ford F-150?
He noticed that the truck had a fresh oil change with 5W-20 Castrol full synthetic, but in doing his research on the truck and the engine, he has seen many people recommend switching to a heavier weight. Having read that, the OP posted in the forum asking for advice on what oil he should run for the best longevity.
What kind of engine does a Ford F-150 have?
TECHNICAL SPECIFICATIONS. 2009 F-150 Technical Specifications. POWERTRAIN/CHASSIS* indicates E85 performance. POWERTRAIN. 4.6L 2V V-8. 4.6L 3V EFI V-8. 5.4L 3V Triton V-8. Engine Type.
They had to make some design decisions with modular engines due to the thin oil. 5w20, being thinner, gets hotter, and that’s why Ford had to go with a high volume oil pump and higher capacity oil pans than previous engines (6 quarts on the 4.6L and 7 on the 5.4L).
What kind of oil do you put in a Ford Focus?
Ford specifies the weight (5W-20, 15W-40, etc.) and the specification that the oil must meet in the manual. The recommended oil weight is also shown on the oil fill cap. Some engines, especially diesels, specify a lighter oil in cold weather. This requirement is pretty much obsolete in gasoline engines.
