What kind of fittings do you need for an air compressor?

Repco Air Line Fitting 1/4in M – 1/4in Barb -… Repco Air Line Fitting 1/4in M – 3/8in Barb -… Repco Air Line Fitting 1/4in M – 5/16in Barb -… For those who already own an air compressor, we believe you need the right air compressors accessories to ensure you get the most out of your equipment.

What kind of compression fitting do I need at direct hoses?

At Direct Hoses we have all the PARKER LEGRIS Snap Connectors you could possible need. Not only that, but all our PARKER LEGRIS Snap Connectors are available at rock-bottom prices with next day … At Direct Hoses we have all the Wade Imperial Brass Compression Fittings you could possible need.

How to attach quick connect fitting to recharge hose?

Attach quick connect fitting on end of recharge hose to low-pressure service port identified earlier by pulling the connector ring back as the fitting is pushed on. NOTE: Our quick connect fitting will attach only onto the low-pressure port. 4. READ PRESSURE COLOR

What kind of hose do you use to move a compressor?

Compressors are heavy, so its better to opt for a longer hose, rather than move a large compressor. The two most common hose types are the recoil hose and the retractable hose. Recoil hoses are shaped like a spiral or a spring that easily stretches out and shrinks back, keeping the workspace tidy.

FIXSMITH Air Hose Connector- 2 Way Air Hose Splitter,1/4 In NPT, Air Compressor Accessories Fittings, Swivel 360 Degrees Connectors. . . . . . FYPower 1/4 inch x 25 ft Recoil Poly Air Hose Kit, 20 Pieces Air Compressor Accessories Set, 1/4″ NPT Quick Connect Air Fittings, Blow Gun, Chuck, Safety and Tapered Nozzles, Couplings, Orange PU Hose

Are there any 2 way air hose connectors?

. FIXSMITH Air Hose Connector- 2 Way Air Hose Splitter,1/4 In NPT, Air Compressor Accessories Fittings, Swivel 360 Degrees Connectors. . . . .

Where to put pressure regulator on air compressor?

The second place you can put your pressure regulator is just after the air compressor and before the (shop) air hose. This will likely put less stress on your air line, due to the lower psi that will be flowing through it.

Can you connect an airbrush to a shop air compressor?

Though there is going to be more involved when it comes to connecting an airbrush to a shop air compressor, it can pay off big time in terms of usability. As shop compressors commonly have large air storage tanks to which makes for a plethora of advantages when running an airbrush!