What is the weight of a Genie GS 2632?
What is the weight of a Genie GS 2632?
4,413 lb
The quiet, electrically-powered Genie® GS™-2632 slab scissor lifts are excellent for indoor and outdoor construction, maintenance and installation applications on firm, level surfaces….Overview.
| Specification | Value |
|---|---|
| Machine Width | 2 ft 8 in | 0.81 m |
| Machine Length | 8 ft | 2.44 m |
| Weight | 4,413 lb | 2,002 kg |
How do I reset my Genie scissor lift?
hold the button and turn the key switch to the ON position. hold the button and turn the key switch to the ON position. (O TO 10 SECONDS, 2 IS THE DEFAULT.
What is a 2632 scissor lift?
The Genie GS 2632 is an electric self-propelled scissor lift with front wheel drive. With zero inside turning radius, this lift can get into cramped spaces like construction sites and narrow aisles.
How do you charge a genie lift?
Connect the Lift to a Battery Charger But, there may be instances in which the charger is mounted in the lift’s rear. From here, plug the charger into an AC extension cord and plug the cord into an electrical outlet. Keep the length between the electrical cord and charger as short as possible.
How much does a 26 foot scissor lift weight?
A 19-foot scissor lift with a maximum working height of 25 feet and a lift capacity of 500 pounds will weigh approximately one ton. A 26-foot lift with a maximum platform weight capacity of 800 pounds and a maximum platform height of 25.5 feet can weigh as much as 4,700 pounds.
Why is my scissor lift not working?
Step 1: Check the power supply to your lift (including all cables, the actual power switch and all of the fuses). If you hear a clicking noise, the velocity fuse is locked. Step 4: Check the continuity of the coil; if it isn’t working, your scissor lift could be experiencing a problem with its solenoid.
Where is the serial number on a scissor lift?
The serial plate is located on the control box side above the swing motor. The chassis stamp is located on the swing bearing at either side (L/R and R/F of plate).
Can you overcharge a scissor lift?
Do not allow batteries to overcharge and boil. documented “READY TO RENT TAG” on the lift. DOCUMENT ALL OF THE ABOVE PROCEDURES IN THE WAY YOU HAVE BEEN INSTRUCTED AS YOU COMPLETE THEM.
