What front axle does a 2002 f250 have?

2002 and up f250, f350 and f350 DRW have the dana 60 front diff.

What axle is in a 99 F250?

When the 1999 Ford F-250 and F-350 Super Duty® trucks were first introduced, all the Single Rear Wheel (SRW) models used a Dana-Spicer Model 50 monobeam front axle.

What kind of axle does a Ford 350 have?

Ford Used The Dana 70 And Dana 70HD Axles In F-350 Trucks Up To 1985.5. The Ford 10.25-Inch Rear Axle Replaced The Dana 70 After 1985. Ford Also Equipped The 1980-Current E-350 Dual Rear Wheel And Some E-450 Super Duty Vans With Dana 70 or Dana 70HD Rear Axles.

How big is the front axle on a Ford truck?

From 2000 on, the Ford Dana 60 front axle is also known as the Model 60F2000+ or the 248M. 248 just happens to be the equivalent in millimeters of 9.75″ – the diameter of the Dana 60’s ring gear.

What are the axles on a 1972 Ford truck?

A 1868-1972 9-3/8″ rear with an open differential got the 31-spline axles with the 1-17/32″ axle bearing I.D. The 9-3/8″ rear end with a Traction-Lok differential got the larger 1-5/8″ axle bearing I.D. (The 9-3/8″ differential on cars had a hood over the pinion. Note how the webbing curves down on the 9-3/8″ housing)

What kind of axle does a Ford Dana 61 use?

The Dana 61 also uses 3.5-inch axle tubes. Other than that, it is very similar to the Dana 60. The Dana 61 was common in Dodge front ends and Ford van rears. The difficulty with the Dana 61 is very limited gear and locker choices.

What kind of axles does an F-250 have?

For the 2017-2019 F-250, the front axles are still a 35 spline Dana 60 axle. In the back, the 10.5” is still standard but trucks fitted with the Heavy Duty Towing Package are set up with a Dana M275 axle. Weak axles have no place underneath an F-250.

How to identify the axle on a Ford truck?

Identify Your Ford Truck Axle From The Door Sticker – Blue Oval Trucks Identify Your Ford Truck Axle From The Door Sticker There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below:

How big is the axle on a Ford F-100?

Widths (Wheel Mounting Surface to Wheel Mounting Surface): Only the 1968-1972 Ford F-100’s with a 9-3/8″ rear end had 31-spline axles (there are actually TWO different 31-spline axle versions in the 9-3/8″ rear ends). One with a 1-17/32″ axle bearing journal and the larger 1-5/8″ axle bearing journal.

What front axle does a 2002 f250 have?