What does the p0012 Ford diagnostic code mean?

P0012 FORD Meaning The Diagnostic Trouble Code (DTC) will set when the Variable Camshaft Timing (VCT) position is over-retarded. The test fails when the camshaft timing exceeds a maximum calibrated value or remains in a retarded position.

What is the DTC code on a 2005 Ford Expedition?

2005 Expedition EB 5.4L with 130K. Thanks. Description: See the description for DTC P0012. Possible Causes: See the possible causes for DTC P0012. Diagnostic Aids: See the diagnostic aids for DTC P0012. Description: The comprehensive component monitor (CCM) monitors the variable cam timing (VCT) position for over-retarded camshaft timing.

What is the p0022 code on a Ford Expedition?

Discussion in ‘ 2nd Gen – 2003 – 2006 ‘ started by Bmaguire36, Jul 4, 2017 . San Jose, CA. So I have a P0022 code, Drivers side Bank 2 Cam Position sensor.

What causes the variable camshaft timing code p0012?

This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing. What causes the P0012 code? The variable camshaft timing (VCT) oil control valve (OCV) stuck in the open position.

Discussion in ‘ 2nd Gen – 2003 – 2006 ‘ started by Bmaguire36, Jul 4, 2017 . San Jose, CA. So I have a P0022 code, Drivers side Bank 2 Cam Position sensor.

Why does the Ford F150 have a p0012 camshaft?

This allows for a more efficient cam profile at any speed. With P0012, the camshaft actuator is leaving the timing retarded. Camshaft Position Actuators change the lift of the camshaft up to 25 degrees. They are hydraulic, which means that they use the vehicle’s engine oil to control lift.

What is the trouble code for the Ford F150?

Ford F150 P0012: “A” Camshaft Position – Over-Retarded. P0012 is a common trouble code. It affects vehicles with variable valve timing (VVT). The list of VVT vehicles is growing, and the Ford F150 can have VVT, and is known to develop this code. P0012 is generic, which means that it has the same definition for the F150 as it does on any other …

Why is my Ford Edge p0012 not working?

Wiring Issues – The wiring going from the solenoid to the ECM can become damaged or broken. This will throw the P0012 OBDII code. The wiring harness to the intake camshaft position sensor may also develop a poor connection. YouTube: How to Find an Open or Short the Fast Easy Way.

How much does it cost to repair a p0012 Ford?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost of diagnosing the P0012 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

How to diagnose a Ford p0012 camshaft timing?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0012 FORD code is 1.0 hour of labor.

What happens when a p0012 DTC is set?

This code is specific to bank 1. Bank 1 is the side of the engine that contains cylinder #1. Most likely a P0012 DTC will result in one of the following: There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

What to do if your Ford F-150 has a p0012 code?

For instance, a P0012 on a 2005 Ford F-150 can be resolved by topping up the engine oil, if that’s what’s triggering the issue. Switching out the timing chain or replacing the engine assembly are also confirmed fixes for this specific code on a Ford.

What does the a in the p0012 code mean?

The P0012 code indicates that your car’s computer has detected a difference in the desired camshaft position angle and the actual camshaft position angle. The “A” in the P0012 code refers to the intake camshaft in an inline or straight overhead camshaft engine.

What do you need to know about a p0012 DTC?

The “A” camshaft is either the intake, left, or front camshaft. Most likely a P0012 DTC will result in one of the following: P0012 hard starting poor idle and/or stalling There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

What are the symptoms of p0012 in a Ford F150?

Here are some of the typical symptoms of P0012 in the Ford F150: Poor Idle Quality – If the camshaft actuator fails it can be tough for the engine to find the right idle speed or idle smoothly.

What do you need to know about error code p0012?

For error code P0012, one or more of the below repairs may be needed to solve the underlying issue. For each possible repair, the estimated cost of repair includes the cost of the relevant parts and the cost of labor required to make the repair.

What does OBDII code p0021 mean for Ford F150?

The list of VVT vehicles is growing, and the Ford F150 can have VVT, and is prone to developing this code. P0021 is a generic OBDII code. This means that it has the same definition regardless of the make or model of the vehicle. It has the same definition for the Ford F150 as it does on any other vehicle.

What does p0012 stand for in Ford F150?

P0012 is generic, which means that it has the same definition for the F150 as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber. It allows the engine to act as though it has different camshaft profiles at different RPM’s.

What is the trouble code for Ford F150?

P0021 is a common trouble code. It affects vehicles with variable valve timing (VVT). The list of VVT vehicles is growing, and the Ford F150 can have VVT, and is prone to developing this code. P0021 is a generic OBDII code. This means that it has the same definition regardless of the make or model of the vehicle.

How much does it cost to diagnose p0021 Ford engine light?

The cost of diagnosing the P0021 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What is the code for a 2010 Ford F150?

2010 ford f150 5.4l idles rough with codes p0012 p0022 . hi mike, richard here. truck has 228,000 on it. replaced all timing chains and guides. replaced both cam sprockets and vct solenoids. truck cold runs smooth but when at operating temp it runs rough at idle and sometimes shut off. no thanks

What do the codes mean on Ford OBD?

The codes are defined as to what system is affected. When possible we give the more descriptive name of the component and the more commonly known OBD II component name. This information combined with proper testing procedures, specifications, and tools like a digital multimeter can help you fix the vehicle right the first time.

How much does it cost to diagnose a p0012 Ford code?

What does this mean? The cost of diagnosing the P0012 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. Engine Light ON (or Service Engine Soon Warning Light)

What are the symptoms of a Ford 3.5 EcoBoost engine problem?

5L Timing Chain Symptoms. A few symptoms of timing chain, guides, tensioner, and cam phaser problems on the 3.5 EcoBoost include: Cold start rattle; DTC P0016; Check engine light; Drivability issues; Rattling on cold starts is one of the more common symptoms that may indicate something is going on with the timing chain.

What does p0018 mean on a Ford F150?

P0018 is a general OBD2 trouble code, which means that it has the same meaning and general symptoms for any vehicle (including the Ford F150) it typically occurs when the Crankshaft Position Sensor and the Camshaft Position Sensor are out of alignment by a certain number of degrees, or if there is a sensor issue.

How to fix check engine light p0012-camshaft position a?

How To Fix Check Engine Light P0012 – Camshaft Position A – Timing Over Retarded (Bank 1) – YouTube A check engine light and low oil pressure light can trigger this code. A check engine light and low oil pressure light can trigger this code. Skip navigation Sign in Search Loading… Close This video is unavailable.

When does check engine light come on on Ford Edge?

On September 18, check engine light again, same p0303 code at 46,900 miles. Dealer now states that I need a whole new engine. This is the 2. 0l engine where many people are having the same issue, coolant seeping into the cylinder (s).

What does the p0012 Ford diagnostic code mean?