What does the fuel pump fuse do?
What does the fuel pump fuse do?
It is often found in the fuse box located in the engine bay and functions as the primary electronic switch that controls power to the fuel pump. The fuel pump relay is usually controlled by the ignition or powertrain control module, and when switched on, will provide current to the fuel pump so that it may function.
What causes the fuse to blow on a fuel pump?
I would start at the fuel pump itself. If the fuse blows as soon as you turn on the key, undo the connector at the tank to the pump and put in a new fuse. Try it again, if the fuse pops then your short is before that point likely a chafed wire on the body. If the fuse stays good then the problem is in the pump harness or the fuel pump itself.
What does it mean when a fuse is blown?
Yet people commonly use the expression “blown fuse” to describe just about any unexpected electricity-related occurrence, especially one involving a loss of power. A “blown fuse” can mean many different things–several of which have little to do with actual fuses.
How often do you get a blown fuse?
Most people probably have experienced a blown fuse at one time or another. Someone always knows what to do when this happens. If you’re a homeowner, that person probably is you. Blown fuses are a common occurrence.
What should I do if I Blew my Fuse?
The Fix: Make sure the faulty device is unplugged and there is no damage to the outlet. First, test the circuit. Then check for any damage on or around the electrical panel. If you see any damage, call an electrician before doing anything else with it. If there is none, flip the breaker switch back to its operating position.
I would start at the fuel pump itself. If the fuse blows as soon as you turn on the key, undo the connector at the tank to the pump and put in a new fuse. Try it again, if the fuse pops then your short is before that point likely a chafed wire on the body. If the fuse stays good then the problem is in the pump harness or the fuel pump itself.
What causes fuel pump to draw more current than intended?
There is also the possibility of a physical (mechanical) restriction in the fuel pump tubing, filter and/or pick up causing the motor to overload and draw more current than intended. That’s why you should measure the actual current draw of the pump in normal operation to rule that out.
Can a fuel pump overload cause a problem?
If not, check the other loads on the fuel pump circuit as those other loads could be causing the problem (the overload). To check that refer to wiring diagram in Factory Service Manual.
