Common questions

What does no light mean on cigarette lighter?

What does no light mean on cigarette lighter?

No light or volts indicates a broken wire between the fuse and the lighter socket or a broken ground wire from the chassis to the socket. In this test we’re only concerned with the power side of the circuit.

Is there a way to get constant power from a cigarette lighter?

However, the relay could be bad… you can check by jumpering the 2 wider terminals of it with a pair of 1/4″ spade terminals on a couple inches of 12-ga wire. You can also leave it like that to get constant power even with the truck off. There is also a non-replaceable ‘fusible link’ type thing on the back of each outlet, or so I’ve heard.

Is there a relay for a cigarette lighter?

I can’t find any relays for the cigarette lighter socket –if there are any for my model (late 95) . Every fuse in the truck seems to be OK. Take the socket out and see if there is 12V at the plug (connector). Now that you have the socket out, use your meter and find out where the continuity stops.

What kind of Fuse do you need for a cigarette lighter?

The fuse for the cigarette lighter may be listed as: 1 12v Power point 2 12v Outlet 3 Cigar lighter 4 Cigarette lighter 5 Aux power point

No light or volts indicates a broken wire between the fuse and the lighter socket or a broken ground wire from the chassis to the socket. In this test we’re only concerned with the power side of the circuit.

However, the relay could be bad… you can check by jumpering the 2 wider terminals of it with a pair of 1/4″ spade terminals on a couple inches of 12-ga wire. You can also leave it like that to get constant power even with the truck off. There is also a non-replaceable ‘fusible link’ type thing on the back of each outlet, or so I’ve heard.

Is there a fuse for a cigarette lighter?

There is another fuse for it under the hood, but it only powers the relay coil, so it shouldn’t blow even if you overload the outlet. However, the relay could be bad… you can check by jumpering the 2 wider terminals of it with a pair of 1/4″ spade terminals on a couple inches of 12-ga wire.

Where are the spade lugs on a cigarette lighter?

There is indeed a fusible link (very small) where the 2 spade lugs are located. The washer I speak of is non conductive and between the one spade lug and the center part of the socket (not the washer immediately after the nut).

Is there a genuine Chrysler 4793554ac lighter?

This product was a perfect fit, easy to install, unit pulls right out of the front of the dash, may have to remove the cover (two screws) but not necessary if you have something to get hold of the unit. This replacement was on a 2009 Dodge Ram 4×4 TRX4. Fixed my busted always on power outlet in my Jeep GC!

What to do if your car cigarette lighter is not working?

Solving car cigarette lighter not working problem. At first, you need to test the lighter with the help of a circuit tester. Place the clip end of the test light to the outer frame of the socket. Hold it on if clipping seems difficult. Next, use the longer end of the tester and try to touch the back of the socket.

Why is the fuse on my cigarette lighter not working?

If the lighter’s fuse is working fine, you need to check it from inside. In this case, the problem may exist inside the lighter. The issue in the socket could be due to debris or any other random objects. To resolve this, you will need to take out the whole socket and clean it thoroughly.

How do you test the power of a lighter?

At first, you need to test the lighter with the help of a circuit tester. Place the clip end of the test light to the outer frame of the socket. Hold it on if clipping seems difficult. Next, use the longer end of the tester and try to touch the back of the socket. If the light turns on, it means the lighter has power.

How to test car cigarette lighter for power?

How to test car cigarette lighter for power. Not working, why? (EP 6) – YouTube How to test car cigarette lighter for power. Not working, why? (EP 6) If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

What to do if your cigarette lighter fuse is not working?

Before testing, turn the ignition on, power outlets will only be powered when the ignition is switched on, this prevents your car battery draining away. This is a lot like the board game “Operation” – if you touch the outer ring with the test light, the fuse will blow, so keep that in mind.

What does it mean when your car light is not working?

This means when the ignition switch is off there’s no power at the power point. Probe the wiring with a test light or volt meter to check for signs of life. If you find power now, you either have a bad connector or the socket is faulty. Modern vehicles will have a slightly more complex layout.

How to test car cigarette lighter for power. Not working, why? (EP 6) – YouTube How to test car cigarette lighter for power. Not working, why? (EP 6) If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Before testing, turn the ignition on, power outlets will only be powered when the ignition is switched on, this prevents your car battery draining away. This is a lot like the board game “Operation” – if you touch the outer ring with the test light, the fuse will blow, so keep that in mind.

I can’t find any relays for the cigarette lighter socket –if there are any for my model (late 95) . Every fuse in the truck seems to be OK. Take the socket out and see if there is 12V at the plug (connector). Now that you have the socket out, use your meter and find out where the continuity stops.

Where is the fuse on a car cigarette lighter?

You can find the location of the fuse box and the correct fuse by searching your owners manual. We don’t know for sure the fuse is getting power and passing through it so lets go ahead and check it with a test light. Place the ground clip on any clean chassis ground, verify the test light works.

Can a defective power socket cause a cigarette lighter to not work?

If you were able to rule out both factors as the cause of the defect, the lighter socket itself may be defective. However, this happens relatively rarely and should therefore be checked in a specialist workshop before you buy a new socket. If the socket is defective, you only have to replace it.

How do you replace a cigarette lighter in a car?

Pick up a replacement cigarette lighter. These can be purchased at most automotive stores such as AutoZone or Pep Boys. All cars use the same size so there is no need to measure the size of your power port. Place the cigarette lighter into the power point. When you want to charge the cigarette lighter press it down completely.

Why is my car lighter not working?

The problem is not much serious but certainly inconvenient if left repaired. But there is a question why is your car cigarette lighter not working? The possible reasons could be anything such as the lighter’s socket fuse is blown; it lost its power or presence of foreign objects that is causing a problem inside the socket.

Why would a cigarette lighter not work?

Even after replacing the fuse and cleaning the lighter, your cigarette lighter is not working, this means the cigarette lighter is itself at fault. Pull the lighter’s portion out of the socket and check for burned areas or any debris issue.

Where is the fuse for the cigarette lighter in a car?

The cigarette lighter fuse is located in engine compartment under hood. Engine Compartment Fuse Block: The under-hood fuse block is located on the driver side of the engine compartment.

Author Image
Ruth Doyle