What do I need to replace a 1968 Corvette gas tank?

We also ordered one of Zip’s 1968-1974 Corvette gas tank installation kits ( PN GT-383) which includes fuel tank mounting straps with anti-squeak pads, strap to frame mount bolts, gas tank lower support anti-squeak pads and fuel filler neck screws.

What does a corvette central deluxe gas tank kit do?

Corvette Central’s Deluxe Gas Tank Kit (PN 361021) comes complete with a new cap, fill neck, gaskets, vent hoses, hold-down straps, and supporting hardware. Assuming originality isn’t paramount, it’s a smart alternative to simply cleaning and reinstalling the OEM unit, a process that, as we’ll see momentarily, does not guarantee results.

What makes a gas tank clog up in a corvette?

Check the filter. The aftermarket unit in our C1 was completely clogged with rust, indicating a badly deteriorated tank. 2. After removing the convertible hard top, Lovell begins the job by removing the screws securing the fuel-tank cover.

How to install a CC tank on a corvette?

With the tank exposed, Lovell cuts and removes the return line feeding the (owner-installed) aftermarket fuel system. It will not be reused with the CC unit. 4. Next to go are the fill tube and vent hose, followed by the fuel pickup/sending unit (shown). The wiring for the sending unit may be disconnected and set aside for now. 5.

How old is the gas tank on a corvette?

After a careful process of elimination left the 54-year-old factory fuel tank as the only possible culprit, AV’s Greg Lovell decided that the wisest (and most economically palatable) course of action was to order up a fresh replacement unit from Corvette Central.

What are symptoms of fuel leak in corvette?

It covers the left side fuel tank and related parts, including the primary fuel pump, though is primarily for cracks on the top of the tank itself. Symptoms include: check engine light, smelling fuel vapor, and/or fuel leaks on the surface below the car.

How to replace the radiator on a 1967 Corvette?

01: Here is everything supplied to us by Zip Corvette: all aluminum Corvette radiator, expansion tank with mounting straps, radiator and heater hoses, hose clamps, radiator cap and fittings. You will also need some common hand tools, anti-freeze and a drain pan. 02: Start by opening the petcock and draining out the radiator.

What kind of coolant does a corvette use?

COOLANT: Your Corvette was designed to use a 50-50 mix of ethylene glycol-based coolant/anti-freeze (the “green stuff”); the new “Dexcool” (“red stuff”) shares the same ethylene glycol base, but has a different additive package.

Where is the fuel tank on a corvette?

Sitting on top of the tank in bags are parts Zip includes with every ’68-’74 repro tank: a tank pick-up retaining cam lock, pick-up O-ring seal, filler neck gasket and a set of filler neck screws.

Where does the gas tank sit on a corvette?

The gas tank should sit on the fixed cross-member, and you can now work it free and lower it on the jack. You’ll notice at least two (and maybe more) flexible rubber fuel lines going to hard steel tubes attached to the frame of the car.

Can you change the fuel line on a C3 Corvette?

These lines often seep and weep fuel long before they burst open and leak gas all over the floor – so if you’ve been smelling gas around your Corvette, chances are good that your fuel lines are cracked. Fortunately, replacing your vintage third-generation Corvette’s fuel tank (1968-1982) is something you can do at home if you’re reasonably handy.

When to replace the gas tank in a corvette?

Fortunately, replacing your vintage third-generation Corvette’s fuel tank (1968-1982) is something you can do at home if you’re reasonably handy. The precise instructions will differ from model year to model year, so as always be sure to get yourself a good repair and assembly manual for your particular Corvette.

What kind of fuel tank do I need for a 1968 Corvette?

Zip Products sells three types of fuel tanks for the 1968-1982 cars. The first two types: reproduction replacement and restoration-quality reproduction replacement stamped with the logo of the original supplier, O.L. Anderson Company, are available for ’68-’82 applications.

How do you drain gas from a corvette?

Set your fire extinguisher nearby and drain all the fuel from the gas tank. You might need to siphon or pump out the gas, but if you remove the flexible fuel line from the fuel pump up in the engine bay, the gas will often drain right into a pan for you. You can lift the rear end of the car to let gravity help if you need to.

What do I need to replace a 1968 Corvette gas tank?