Common questions

What can be the problem with a Ford Expedition 4×4?

What can be the problem with a Ford Expedition 4×4?

I HAVE AN EXP 1997 4X4 AND THE REVERSE DO NOT ENGAGE AND i HEAR A GRINDING NOISE WHILE i PUT THE REVERSE BUT IT DOES NOT TAKE THE REVERSE STAY GRINDING ??? WHAT CAN BE THE PROBLEM ???? 4 people found this helpful. 1999 ford expedition 4×4 it no going in to two wheel drive 7 people found this helpful. Is it electric ? A4WD ?

Is there a 4 wheel drive sensor on the expedition?

I have a 2000 expedition and i cant find the 4 wheel drive sensor in the front end can some one help plz 22 people found this helpful.

Why does my 4 wheel drive not engage?

Basically, The IWE requires constant vacuum pressure to keep the drivetrain in 2wd mode. Once there is a leak the pressure is lost and the hub will “dislocate” and attempt to engage 4H. If there is a leak or only partial vacuum pressure loss, the Hub won’t fully engage.

Why does my 4WD light not come on?

It is electric A4WD my light does not light up and won’t engage. Any help would be great 3 people found this helpful. It is electric and A4WD light won’t come on and it will not engage any help would be appreciated. 4 people found this helpful.

Why does my Ford Expedition not have 4 wheel drive?

Or do you think the transfer case shift motor just happened to go bad, and if so would the indicator lights still work? they dont blink. thanks for any help. My 99 Expedition Eddie Bauer has full time 4 wheel drive. Or at least it has A4x4 on the switch.

Is the Eddie Bauer expedition a 4 wheel drive?

My 99 Expedition Eddie Bauer has full time 4 wheel drive. Or at least it has A4x4 on the switch. WHen turning steep into a parking space or out on the road it jumps and hops as if it were in 4wheel high or something.

Why are there fumes in my Ford Expedition?

Fumes seem also to be either entering the cabin in the rear cargo area, or gathering there and being distruibuted by the rear heat-cool system ventilation fan through the ceiling air ducts. Ford has tried repeatedly to diagnose and fix the problem, but seems to be having trouble identifying the cause.

It is electric A4WD my light does not light up and won’t engage. Any help would be great 3 people found this helpful. It is electric and A4WD light won’t come on and it will not engage any help would be appreciated. 4 people found this helpful.

Basically, The IWE requires constant vacuum pressure to keep the drivetrain in 2wd mode. Once there is a leak the pressure is lost and the hub will “dislocate” and attempt to engage 4H. If there is a leak or only partial vacuum pressure loss, the Hub won’t fully engage.

I HAVE AN EXP 1997 4X4 AND THE REVERSE DO NOT ENGAGE AND i HEAR A GRINDING NOISE WHILE i PUT THE REVERSE BUT IT DOES NOT TAKE THE REVERSE STAY GRINDING ??? WHAT CAN BE THE PROBLEM ???? 4 people found this helpful. 1999 ford expedition 4×4 it no going in to two wheel drive 7 people found this helpful. Is it electric ? A4WD ?

I have a 2000 expedition and i cant find the 4 wheel drive sensor in the front end can some one help plz 22 people found this helpful.

Why is the 4WD on my Ford F150 not working?

The 4WD system of your Ford F150 can fail to engage due to any of the following reasons: This article will also cover how you can troubleshoot and diagnose the 4WD problem without any tools, as well as other common 4WD problems found on the F150 Ford Pickup. So let’s dig into what could have gone wrong and look at the obvious culprits.

What to do if your 4 wheel drive won’t engage?

Since 2004+ they’ve been more robust and seldom cause issues. To test if the actuator is meshing and engaging, remove both lines and with the front still raised, the front CV shafts should be engaged and be rotating as well.

What causes a Ford Expedition to stall at a stop?

Bad Solenoid. When your Ford Expedition stalls at a stop, just as it would if it had a manual transmission and you neglected to push in the clutch, that’s a sign that one of the solenoids is malfunctioning or has gone out.

Where is the 4×4 low range switch on a Ford Expedition?

The 4×4 low (4x4L) range switch is located on the transfer case cover. It provides an indication of when the 4×4 transfer case gear system is in the low range. The powertrain control module then modifies shift schedule for 4x4L operation.

Why does my Ford Expedition not accelerate when I push the gas?

If your Ford Expedition won’t accelerate, that is a serious cause for concern. There are a lot of different reasons that can cause this. Diagnosing the issue can be narrowed down by whether the engine is still revving when you push the gas or not. There is a section for each scenario with likely causes for each.

Why is my Ford truck stuck in 4 wheel drive?

There are a few things that can stop the power from getting to the motor a bad module, blown fuse or a bad wiring harness. If the actuator motor is getting power and it still does not move, then you need to replace the actuator motor. I hope this helps and I am sorry for any confusion.

Where is the suction allowign exhaust in a Ford Expedition?

They seem strongest with the right rear window (located above the tail pipe) is rolled down, especially if a window on the opposite side of the car is also rolled down. This arrangement apparently reduces internal passenger cabin air pressure, creating a suction allowign exhaust to get in???

Fumes seem also to be either entering the cabin in the rear cargo area, or gathering there and being distruibuted by the rear heat-cool system ventilation fan through the ceiling air ducts. Ford has tried repeatedly to diagnose and fix the problem, but seems to be having trouble identifying the cause.

Why is the air conditioner not working on my Ford Expedition?

When this switch fails your air conditioning is dead in the water. Blower Motor – If there is no air blowing from your Expedition at all, the blower motor is at fault. They are not that expensive and are easy to replace (most of the time). Blend Door – The blend door controls how much air conditioned and heated air enters the cabin.

Why is my Ford F150 not 4 wheel drive?

If the wheel rotates with the driveshaft and the truck is in 4H you have a problem with the IWE on that wheel. If you are experiencing a problem with a grinding noise coming from the front of your vehicle while accelerating then this section is for you.

Is there a 4×4 fuse in the dash?

yes it could be,the 4×4 fuse is usualy in fuse box under dash,some are under the hood fuse box it will say 4×4 on fuse pannell,also you may want to have the hub assem on front to be checked to see if splines are striped,if just not enguadeing,fuse or the motor mentioned in other post.ford is bad for this motor going bad.

Why is my 4 wheel drive not working?

1 Failed 4WD Actuator 2 Damaged Vacuum hoses 3 Failed Vacuum Solenoid 4 Transfer case shift motor

Why does my expedition not accelerate when the RPMs go up?

If your Expedition won’t accelerate, but the RPM’s go up it’s usually not going to be an engine related issue. Somehow, the power that your engine is creating is not making it to the rear wheels. This is typically a transmission related issue. Here are the most common cause of acceleration with the RPM’s going up:

They seem strongest with the right rear window (located above the tail pipe) is rolled down, especially if a window on the opposite side of the car is also rolled down. This arrangement apparently reduces internal passenger cabin air pressure, creating a suction allowign exhaust to get in???

Author Image
Ruth Doyle