What are the torque specs for a cylinder head?

What are the torque specs for a cylinder head?

CYLINDER HEAD TORQUE SPECS. Cam Caps 8 x 1.25 mm 22 Nm (2.2 kg-m, 19 lb-ft H22) (H23A 16 lb-ft) 6 x 10 mm 12 N-m (1.2 kg-m, 9 lb-ft) “Except” (EX) 6,8 & (IN) 5,7 Are 7 lb-ft. Cam Gears Bolts 10 x 1.25 mm 37 lb-ft (H23A 27 lb-ft)

What are the torque specifications for an AMC 4.0L torkspec?

44.74 Type: Bolt 80 960 108.47 Type: Bolt 110 1320 149.14 3 Step: 22; 45; 110-NOTE: Left Front Bolt Final=100FtLbs Type: Bolt 100 1200 135.58 Left Front Bolt ONLY – 3 Step: 22; 45; 100 Type: Bolt 17

What are the torque specs for a H series engine?

CYLINDER HEAD TORQUE SPECS Cam Caps 8 x 1.25 mm 22 Nm (2.2 kg-m, 19 lb-ft H22) (H23A 16 lb-ft) 6 x 10 mm 12 N-m (1.2 kg-m, 9 lb-ft) “Except” (EX) 6,8 & (IN) 5,7 Are 7 lb-ft Cam Gears Bolts 10 x 1.25 mm 37 lb-ft (H23A 27 lb-ft) Engine Mount Bracket To Cylinder Head…

What kind of torque does a 128.8 hp engine have?

128.8 Crankshaft To Engine Block Cylinder Head To Engine Block Distributor Clamp To Engine Block Distributor Clamp To Engine Block Drain Plug To Oil Pan Engine Temp Sensor To Engine Block Exhaust Manifold To Cylinder Head

How much torque does a cylinder head have?

Tighten cylinder head bolts (except hex hole bolt) to 53 N.m (5.3 kgf-m, 38.5 lb-ft) according to numerical order in figure. In the same manner as Step a), tighten them to 84 N.m (8.4 kgf-m, 61.0 lb-ft). Loosen all bolts until tightening torque is reduced to 0 in reverse order of tightening.

How big is the torque converter control bolt?

Application Spec Floorshift Control Bolt 89 in lb Flywheel to Torque Converter Bolt 46 ft lb Forward Accumulator Cover to Valve Body 6-10 ft lb Heat Shield to Transmission Bolt 13 ft lb

How much torque does a small block Chevy have?

Small Block Chevy Torque Specs Fastener Type Torque Spec 7/16 in. Outer Main Cap Bolt 65 ft.-lbs. 7/16 in. Inner Main Cap Bolt 70 ft.-lbs. 3/8 in. Outer Main Cap Bolt 40 ft.-lbs. 11/32 in. Connecting Rod Bolt 38-44 ft.-lbs.

How much torque do you need for a crankshaft?

In the same manner as Step a), tighten them to 53 N.m (5.3 kgf-m, 38.5 lb-ft). In the same manner as Step a) again, tighten them to 105 N.m (10.5 kgf-m, 76.0 lb-ft). Tighten cylinder head bolts (hex hole bolt) to specified torque. Install lower crankcase (1) to cylinder block. Apply oil to crankcase bolts before installing them.