Common questions

What are the fuses on a GMC Sierra?

What are the fuses on a GMC Sierra?

RH Turn and Stop Lamp) ECM 1 Fuse #15 10A Vehicle Control Module (VCM)/Powertrain Control Module (PCM) from IGN I Relay) INJA Fuse @20 15A Fuel injectors 1. 3, 5, and 7. Ignition Coils. Glow Pug Module, Fuel Heat. Water in Fuel (WIF) Sensor, Wastegate Solenoid IGN E Fuse #25 10A NC Compressor Clutch Relay.

How to change the running lights on a GMC Sierra 1500?

The video above shows you how to change the daytime running lights in your 2003 Sierra 1500.

What’s the fuse on a 2003 Chevy Silverado?

LBEC 1 50A FLASH Fuse, TBC 2A Fuse. TBC 2B Fuse. TBC 2C Fuse. LT DOORS Fuse LR PARK 10A Exterior Lamps-Left Rear.

What are the fuses on a Chevy Tahoe?

Evaporative Emission (EVAP) Canister Purge Solenoid, Fuel Composition Sensor, Secondary Fuel Pump Relay INJ 1 15A Fuel Injectors-Odd-Numbered. Ignition Coils-Odd-Numbered INJ 2 15A Fuel Injectors-Even-Numbered. Ignition Coils-Even-Numbered TRL B/U WA Body Control Module (BCM). Trailer Wiring. Back-Up Alarm

Where is the fuse box on a GMC Sierra?

The fuse block access door is on the driver’s side edge of the instrument panel. The center instrument panel utility block is located underneath the instrument panel, to the left of the steering column. The underhood fuse block in the engine compartment on the driver’s side of the vehicle near the battery.

What kind of running lights do GMC Sierra 1500s have?

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car. Daytime running lights, sometimes referred to as DRLs or DTRs, are lights that switch on automatically when your 2003 GMC Sierra 1500 is turned on and in drive.

LBEC 1 50A FLASH Fuse, TBC 2A Fuse. TBC 2B Fuse. TBC 2C Fuse. LT DOORS Fuse LR PARK 10A Exterior Lamps-Left Rear.

Why are the running lights not working on my Silverado?

Engine running, in drive, sunny day with the lights on or off. Nada. They do flash when I lock/unlock the truck, though. I changed the fuse and the relay for the DRL’s, but it made no difference.

Cruise Control, 4 WD Display Illum. Rear Window Defogger Timer, Aux. Batt. Relay Feed, Safety Belt Buzzer Timer, Cluster Ign. Feed Ign. A Dome Lamp, Cargo Lamp, Ctsy, and Glove Box Lps.

Where is the fuel relay on a Chevy 1500?

Some simple diagnosis techniques can often resolve the problem. While troubleshooting, wear protective gear and keep a class B fire extinguisher nearby. The fuel relay is located on the passenger side fire wall, “near the top of the compartment under the relay cover,” according Haynes manuals.

What to do about a fuel pump relay?

If the fuses and relay are good, check the fuel pump relay control circuit from the relay to the engine control module/powertrain control module (ECM/PCM). If the circuit is good, have the ECM/PCM diagnosed and serviced by an authorized repair shop or dealership.

Where is the fuse on the fuel pump?

Mounted about 6 inches to the right of the fuel pump fuse, it’s black with five wires coming out of the bottom. Examine fuel lines for a leak or crimped hose (or fuel line) impeding the flow of fuel to the carburetor. Have someone turn the ignition on while you listen for the fuel pump (located in the fuel tank) to activate.

What is the fuel pump relay wiring diagram?

Fuel Pump Relay Wiring Diagram (Automatic Trans. Only) NOTE: The illlustrations and info in this page apply only to 1994 Chevrolet/GMC pickups with a 4.3L, 5.0L or a 5.7L engine. For the 1993 fuel pump wiring diagram, check out the following article: 1993 Fuel Pump Circuit Tests (GM 4.3L, 5.0L, 5.7L).

Cruise Control, 4 WD Display Illum. Rear Window Defogger Timer, Aux. Batt. Relay Feed, Safety Belt Buzzer Timer, Cluster Ign. Feed Ign. A Dome Lamp, Cargo Lamp, Ctsy, and Glove Box Lps.

Some simple diagnosis techniques can often resolve the problem. While troubleshooting, wear protective gear and keep a class B fire extinguisher nearby. The fuel relay is located on the passenger side fire wall, “near the top of the compartment under the relay cover,” according Haynes manuals.

Mounted about 6 inches to the right of the fuel pump fuse, it’s black with five wires coming out of the bottom. Examine fuel lines for a leak or crimped hose (or fuel line) impeding the flow of fuel to the carburetor. Have someone turn the ignition on while you listen for the fuel pump (located in the fuel tank) to activate.

Why are all of the gauges in my car not working?

There are a lot of different types of instrument cluster designs and configurations, but when all of the gauges in a car stop working at once, the problem is usually either a fuse or wiring problem. The first step in diagnosing this type of issue is to identify the fuse associated with the instrument cluster or gauges.

Why does my car gauge read cold when I Turn on the ignition?

With the ignition on, the gauge should register cold. If you connect the sending unit wire to ground, the gauge should switch to read hot. If the gauge moves as expected, then you can suspect a bad sending unit. If the gauge doesn’t move when you ground out the sensor wire, then you can suspect a bad gauge.

What causes the ECM in a car to fail?

The most common source of ECM failure is in one of the wiring harnesses. If the wires to the transmission or fuel injectors become corroded, they can lose conductivity, leading to a failure. Fortunately, these issues can usually be resolved by replacing the corroded wires. If one of the wires shorts out to the frame, the ECM may fail entirely.

STOP LPS Fuse #14 20A VEH STOP and CHMSL Fuses. Trailer Wiring (LH. RH Turn and Stop Lamp) ECM 1 Fuse #15 10A Vehicle Control Module (VCM)/Powertrain Control Module (PCM) from IGN I Relay) INJA Fuse @20 15A Fuel injectors 1. 3, 5, and 7.

What is a typical GM starting system wiring diagram?

Click on the image here to pull up a PDF of a typical GM starting system wiring diagram. Depending on the year, model and engine of your GM vehicle, your starting system may be less complicated or use only some of the components shown here. For example, earlier anti-theft systems didn’t communicate the same way with the PCM.

Why does my GMC Silverado have no crank?

This is a fix for a known electrical issue with the 2003-2007 C/K series GM Trucks where a bad ground causes multiple issues. Such as no start, no crank, intermittent no gauges, and sometimes the theft light would stay on, and the parking lights would stay on.

Where are the fuses located in a Chevy Impala?

It is located on the driver’s side of the instrument panel, behind the cover. It is located on the passenger’s side of the instrument panel, behind the cover. There are two fuse blocks that are located in the engine compartment, on the passenger’s side. How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

Where is the fuse box on a Monte Carlo?

It is located on the driver’s side of the instrument panel, behind the cover. It is located on the passenger’s side of the instrument panel, behind the cover. There are two fuse blocks that are located in the engine compartment, on the passenger’s side.

Where is the fuse box in a car?

Fuse box in engine compartment. fuse box location. The underhood fuse block in the engine compartment on the driver’s side of the vehicle near the battery. Lift the cover for access to the fuse/relay block. fuse box diagram. legend. Device Rating Description STUD 1 Fuse

Where are the fuse panels on a GMC Sierra?

In this article, you will find fuse box diagrams of GMC Sierra 2014, 2015, 2016, 2017 and 2018, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where is the fuse box located on a GMC Envoy?

Fuse box location Rear Underseat Fuse Block It is located under the rear seat on the driver’s side of the vehicle (tilt the seat up, remove the fuse box cover). Engine compartment fuse box

When did the GMC Acadia fuse box come out?

In this article, we consider the first-generation GMC Acadia, produced from 2007 to 2016. Here you will find fuse box diagrams of GMC Acadia 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

When did the GMC TopKick fuse box come out?

The medium duty truck GMC Topkick was produced from 2003 to 2010. In this article, you will find fuse box diagrams of GMC Topkick 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

STOP LPS Fuse #14 20A VEH STOP and CHMSL Fuses. Trailer Wiring (LH. RH Turn and Stop Lamp) ECM 1 Fuse #15 10A Vehicle Control Module (VCM)/Powertrain Control Module (PCM) from IGN I Relay) INJA Fuse @20 15A Fuel injectors 1. 3, 5, and 7.

What causes a door lock relay to not work?

Power door locks do not function. Power door locks that do not function are another common symptom for a problem with the door lock relay. If the power door lock relay fails, it will cut off power to the entire power door lock system and may cause them to not function correctly.

How to diagnose power door locks dont work properly?

If all of the door locks are inoperative, start your diagnosis at the fuse box. Inspect the fuse that protects the door lock circuit to ensure it is not blown. Consult the fuse box placard or your owners manual for fuse designations and ratings.

Why are the door locks on my Suburban not working?

My 1997 2500 Suburban has a different twist. The lock/unlock switch on the driver side arm rest will not activate the door locks. But….. They all function automatically by locking when the truck is started and placed in gear and by unlocking when the truck is shut off. I checked the fuse box and found #13 fuse blown.

Where is the door lock relay located on a 1998 GMC Sierra?

The door lock relay is located under the center of the dash. Wow! This is probably why none of my searches are producing informative results. I also currently own a 1998 GMC Sierra truck and the dash looks identical. I have the Chilton manual for my 98′ but it never dawned on me to look.

Where are the fuses on a GMC Sierra?

The underhood fuse block in the engine compartment on the driver’s side of the vehicle near the battery. Lift the cover for access to the fuse/relay block. To remove fuses hold the end of the fuse between your thumb and index finger and pull straight out.

Where are the relays on a power door lock?

Facing the box you have two relays on the left side one on top of the other. On the right side you have a single relay. I was wondering if anyone can tell me what part of the locking operation does each relay control and what one of the three relays it is.

Where is the fog lamp relay on a GMC Sierra?

SEO B1 15A Instrument Panel Cluster (IPC), Rear Fog Lamp Relay. Overhead Console, Roof Beacon Switch LO HOLP-LT 10A Headlamp-Low Beam-Left, Headlamp Ballast-Left LO HDLP-RT 10A Headlamp-Low Beam-Right.

Where are the fuse panels on a Chevy Silverado?

Here you will find fuse box diagrams of Chevrolet Silverado 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

4WD Fuse #7 15A. Auxillary Battery Relay, Front Axle Actuator/Switch. Automatic Transfer (ATC) Control Module, Vehicle Control Module (VCM) Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period. They include wiring diagrams and technical service bulletins.

Author Image
Ruth Doyle