Common questions

Is there an auxiliary fuel tank for a Dodge Ram?

Is there an auxiliary fuel tank for a Dodge Ram?

Dodge Ram Diesel Auxiliary Fuel Tank Install Kit 2013-current Dodge Ram 2500/3500 4WD. The Southern Truck diesel auxiliary fuel tank install kit provides the ability to refuel your diesel fuel tank using a gravity feed system.

How does a diesel fuel auxiliary tank work?

Connect your Diesel Fuel Auxiliary Tank (sold separately) to your vehicle’s fuel-filler neck to continually keep your tank full. All hoses and mounting hardware included. Some cutting may be required of the OEM fuel hose. For diesel fuel operation only.

Can you change the ignition on an aux PDC?

All of your switches are ignition by default. You can change switches 1&2 (together only) to battery by moving the 5 amp mini fuse over one slot in the aux PDC. 2013 doesn’t have the option to configure the switches through commercial settings, and AlfaOBD can’t make it happen. All of your switches are ignition by default.

How do you plug in an aux switch?

The fuse block / relay for the aux switches have tiny tiny numbers on them dictating which switch/number they are. Get a pair of needle nose pliers and pull the rubber plug out of the specific plug you wanna use. The wire with the spade connector then pushes into it, that is your power.

Can you add auxiliary switches to a Ram 3500?

I’m very interested in adding Auxiliary Switches to my 2019 Ram 3500. Has anyone done it to a 2019? If so what all does it entail? How difficult is it? Need to know how populated the AUX fuse box is. Does both your guys’ AUX fuse box only have three relays and three fuses installed in it, or are they fully loaded?

Can you add aux switches to a diesel?

Click to expand… It is kind of silly sounding when for a pittance more you can get the 220+220 option for the diesels. It is kind of silly sounding when for a pittance more you can get the 220+220 option for the diesels. Click to expand… I’m still having a hard time buying into this.

All of your switches are ignition by default. You can change switches 1&2 (together only) to battery by moving the 5 amp mini fuse over one slot in the aux PDC. 2013 doesn’t have the option to configure the switches through commercial settings, and AlfaOBD can’t make it happen. All of your switches are ignition by default.

What kind of aux switch do I need for hemi truck?

On the build site, it shows 380A (220+160) for Hemi trucks only. if you build a Diesel it deselects the 380 dual alternators. If you try to select them, it forces it back into a Hemi. Pick 440A, it forces it to Diesel.

Author Image
Ruth Doyle