Common questions

Is there a crank on my Chevy Malibu?

Is there a crank on my Chevy Malibu?

All the guages on the dash and all go off, but there’s no crank, no sound, nothing. When I turn back from start to on, all the guages, radio, etc power back on. All the electronics turn on and get good power in the on position lights, radio, windows, etc. It’s when I turn to start, I get nothing.

What causes a Chevy Malibu to not start?

Tried switching around relays to see if there’s a bad one. Unless they’re all bad, not a problem here. Also, turning the key to start does not cause any relay to click. Setting the security system off causes the headlights relay to click repeatedly. (Probably irrelevant here). Removed and visually inspected every fuse, in all 3 fuse boxes.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

Is the starter circuit good on a Chevy Malibu?

Checked the starter circuit as described by Ben’s answer. Good power and ground to the correct relays. All fuses are good. Checked wiring to ecm. Ground on X3 73 is good. Confirmed B+ power to terminal 20 red-white on X1.

All the guages on the dash and all go off, but there’s no crank, no sound, nothing. When I turn back from start to on, all the guages, radio, etc power back on. All the electronics turn on and get good power in the on position lights, radio, windows, etc. It’s when I turn to start, I get nothing.

What to do if your Chevy Malibu wont start?

After shifting in to park try starting vehicle. If the vehicle does not start unless you push the shifter hard in to park you will need to adjust the shift cable as described (09077A) Check output from Park Neutral switch to ECM for proper signal. Check all terminals for loose or poor connections at Park Neutral switch and ECM.

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

Checked the starter circuit as described by Ben’s answer. Good power and ground to the correct relays. All fuses are good. Checked wiring to ecm. Ground on X3 73 is good. Confirmed B+ power to terminal 20 red-white on X1.

Is there a problem with my malibu relay?

This is a very common issue with the Malibu’s and it can get quiet costly. This 2010 Malibu can be a nightmare since there are many possibilities to a no start condition. I had to do it the hard way yet to discover that a faulty and poorly designed relay could also be one of those possibilities. The issue with the relay is it has a mind of its own.

This is a very common issue with the Malibu’s and it can get quiet costly. This 2010 Malibu can be a nightmare since there are many possibilities to a no start condition. I had to do it the hard way yet to discover that a faulty and poorly designed relay could also be one of those possibilities. The issue with the relay is it has a mind of its own.

What does no crank / no start mean?

It started as a no crank/ no start (no click,dash lights came on and didn’t dim, only sound was fuel pump) about a month ago. Initially (when I hadn’t replaced anything yet) out of about 100 crank attempts, around the 80th attempt it randomly started up then died after a few seconds and wouldn’t crank or start again.

Tried switching around relays to see if there’s a bad one. Unless they’re all bad, not a problem here. Also, turning the key to start does not cause any relay to click. Setting the security system off causes the headlights relay to click repeatedly. (Probably irrelevant here). Removed and visually inspected every fuse, in all 3 fuse boxes.

What does no start no crank no click mean?

If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that. In the old days, power flowed through the ignition switch and down to the starter solenoid. Not anymore.

Why does my Chevy Malibu have no power?

When turning the key you’d see a visible spark on the negative terminal, and all power would go (like a dead battery). Adjusting the negative cable would reestablish power. After a couple tries, the car would start. This is why I changed the battery terminal connector to begin with.

Why is the no start light on on my Chevy Malibu?

Turning key to run position and letting sit for 10-15 minutes, then to off letting sit for 5 minutes. This I found as a “trick” related to possible malfunctioning anti-theft system that causes similar no start issues, however my anti-theft light does not stay on.

Why does my Chevy Malibu have no crank?

A shifter range selector switch issue or shifter cable issue are certainly two of the possibilities for a no crank condition. There are several others. Thanks for the responses all! Still not sure what’s going on here.

What does no crank no start no click mean?

Diagnostics > By Symptom > No start > No crank no start no click –… GM has issued a technical service bulletin (TSB) #PIP4208 to deal with a no crank, no start, no click situation on the following vehicles: The starting procedure on these vehicles is fairly complicated and the root problem lies in the ignition switch.

What’s the warranty on a 2010 Chevy Malibu?

@Ken, on page 8-8 of the 2010 Chevrolet Malibu owner’s manual it reads that the Roadside Assistance program is provided for up to 5 years or 100,000 miles whichever happens first. I recommend contacting them and having the vehicle towed. This might be something covered under the Powertrain warranty.

After shifting in to park try starting vehicle. If the vehicle does not start unless you push the shifter hard in to park you will need to adjust the shift cable as described (09077A) Check output from Park Neutral switch to ECM for proper signal. Check all terminals for loose or poor connections at Park Neutral switch and ECM.

What kind of power does a Chevy Malibu have?

Checked wiring to ecm. Ground on X3 73 is good. Confirmed B+ power to terminal 20 red-white on X1. I have no power to terminal 19 pink on X1. I checked backprobing, and plugging into the front of the connector (wanted to double check).

Why is my car no crank no start?

Intermittent No Crank No Start. A customer or technician may comment on the above condition. This could be the result of any of the following: Misadjusted or damaged transmission shift cable. Park Neutral (PN) switch installation or internal failure.

Checked wiring to ecm. Ground on X3 73 is good. Confirmed B+ power to terminal 20 red-white on X1. I have no power to terminal 19 pink on X1. I checked backprobing, and plugging into the front of the connector (wanted to double check).

Turning key to run position and letting sit for 10-15 minutes, then to off letting sit for 5 minutes. This I found as a “trick” related to possible malfunctioning anti-theft system that causes similar no start issues, however my anti-theft light does not stay on.

Where is the fuse box located on a Malibu?

Chevrolet Malibu (2006) – fuse box diagram Year of production: 2006 Body Control Module (BCM) The instrument panel fuse block is located at on the lower front side of the console, on the passenger side of the vehicle. Device Ampere rating [A] Usage AIRBAG (BATT) 10 Infiatable Restraint Sensing and Diagnostic Module (SDM) AIRBAG (IGN) 10

Why are the dashboard lights on my Chevy not working?

If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.

Is the instrument cluster on my Malibu dead?

Malibu LT 2012, Instrument cluster panel is dead: except engine light, no other lights get on. all the gauges stop working. I pull out instrument cluster panel fuse for one minute, reinsert it, then everything works normally. the next day or sometimes a few hours later, the instrument panel is dead again.

What is the problem with my Chevy Malibu?

First of all Thank you very much !tommy for your help in this matter. I own 2010 Chevy Malibu LT 2.4L, The problem is with my IPC (Instrument panel/cluster) the gauges and lights are not working.

Why does my Chevy Malibu have no cluster?

Malibu 2009 LT, V6 3.5 engine. It has run almost 40k miles. could be a fuse. I’m more inclined to think there will be a loss of communication code somewhere in the car. A loss of either of those fuses that feed the cluster should bring with it more symptoms.

Author Image
Ruth Doyle