How to upgrade the sound system in a corvette?

First–keep it stock. Repair or replace original equipment (OE) components such that the system performs as well as when your Corvette was new.

How to replace rear speakers in Corvette C4?

09: To replace both rear speaker assemblies, remove the speaker grille retaining screws then remove the grilles and unplug the wiring. Cut the carpeting along the red lines. 10: Cutting eliminates having to disassemble more interior trim to facilitate moving the carpet out of the way.

How big is the Bose AMP in a 1989 Corvette?

Enclosures for 1989 and older Corvettes are the same. The 1988 1/2 and older enclosures house 1st generation Bose amplifiers. These amplifiers have a 6 x 3 1/2 x 7/8 metal case, working on DIY videos for common problems. No power, works with no audio, clock stuck at 1:00, poor reception and others. Rebuild CDM $125. One year warranty.

Why are my Bose speakers on my 1996 Corvette?

Severe radio receiver water damage may also occur from a leaking rear hatch window in 1994-1996 Corvettes. In some cases, the receiver is submerged in the compartment. Speakers can be tested with an AA 1.5 volt battery. The receiver output can be checked with a voltmeter for varying current output to make sure the amplifier is receiving a signal.

What kind of speakers are in a corvette?

2003 Chevrolet C5 Corvette 50th Anniversary Used OEM Bose 6 Speakers Set. Only 1 left!

What does the 1990-1996 Bose radio head do?

The 1990-1996 radio head is only for controlling the receiver and to play CD or cassettes. The sound bites go to the receiver for output to speakers. There are simple tests that can be performed to check the integrity of the amplifiers. If all speakers go out at once, the Bose relay should be checked first.

What is the amplifier number on a 1990 Corvette?

Door speaker amplifier item number 524024is for 1984-1985 Corvettes, 524062for 1990-1996 convertibles, 524065for 1990-1996 coupes. The 1990-1996 rear speaker (left side) part number for convertibles is 524046for and 524043for 1990-1996 coupes.

Can a 90-92 corvette stereo be repaired?

Repair – ’90-92 Corvette, we also suggest sending CDM (Tuner Box), when sending these Corvette radios for repair. Repair – ’93-96 Corvette, all stereo functions work, intermittent audio all speakers, power antenna up and down with audio in and out? See CDM below. NO tuning to a specific FM radio station.

Where is the radio head on a 1990 Corvette?

The radio receiver is located under the passenger side dash in 1990-1993 cars; it’s located behind the passenger seat in the rear compartment of 1994-1996 Corvettes. Some failed 1990-1996 receivers will result in a cessation of sound output. The 1990-1996 radio head is only for controlling the receiver and to play CD or cassettes.

First–keep it stock. Repair or replace original equipment (OE) components such that the system performs as well as when your Corvette was new.

Where is the radio receiver on a 90-92 corvette?

14: If you’re working on a 90-92, locate the radio receiver below the glove compartment on the multi-use relay bracket. It is marked by #7 in this GM Service Manual drawing. Unplug the radio antenna and speaker connections. You can remove the receiver and store it or leave it in place.

Can a Bose receiver be installed in a C4 Corvette?

There are challenges to installing an aftermarket receiver in a late-C4 originally equipped with the up-level, UU8 or U1F Delco-Bose music systems. The most significant are: 1) generally, aftermarket receivers are not compatible with Bose amplifier/speaker units so with all such installations, wiring work is required.

What can I do with my Bose 84-89?

The old Bose head unit was already out of my ’84 and a JVC unit in its place when I got it…it skipped on every bump (very annoying), so I changed it out for a Sony MEX-1GP that has a 1 GB flash drive in the head and a USB connection so I can take my music from my computer… I thought about a head unit and an EQ but opted for just a head unit.