How to unlock a Chevy TheftLock Radio Part 3?

Part 3 of 4: Obtain the radio unlock code 1 ) sign. 2 Enter the radio serial number. You will be prompted to enter the radio serial number you have just obtained. 3 Write down the radio unlock code. The prompt will read out your four-digit radio unlock code. Write it down precisely. …

Where do I find the radio unlock code?

In order to obtain your radio unlock code, you need to find your radio’s serial number. You can get the radio serial number directly from your radio. Step 1: Turn on the ignition. Turn the key to “accessory” mode or “on” mode.

How do you reset a locked GM radio?

Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel. By entering the code yourself, you can avoid the trouble and expense of paying to have your vehicle’s radio unlocked at the dealership.

What to do if your anti theft system is locked up?

If the anti-theft system has locked up your engine, you won’t be able to start it. You’ll have to disable it with these steps. Step 1: Check for the anti-theft light. It’s located on your dash and will have a blue or red light. Step 2: Turn the ignition to the “on” position.

What does theft lock do on a GM radio?

Theftlock is a theft prevention system designed into GM-brand radios starting in the mid-1990’s. This system is designed to lock the radio from use in the event of a loss of power, either from being disconnected or when the battery loses its charge.

How do I unlock my GM TheftLock radio?

Unlocking your Theftlock radio will require you to enter a unique 4-digit numerical code. Before you can do this, however, it will be necessary to write down two separate 3-digit numbers, which you’ll get by punching a series of buttons on the radio’s interface.

What to do if your car won’t unlock?

Turn on the ignition; it must be completely on and your vehicle running. Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds. Write down the 3-digit code that displays on the screen.

Do you need a code to unlock your car stereo?

If you own a vehicle, you may find that the audio systems are equipped with an Anti-theft or radio code feature that requires a special “security code” to unlock your radio. This radio unlock code is not required for normal operations. It’s purpose is to deter a potential thief from removing the stereo.

How to decode Jeep anti theft radio code?

Once you get the new icon just hit two left mouse clicks on it to open the Jeep anti theft radio code decoder, Finally at the end once you will finish whit entering data process just click on the main decode button!

How to unlock your Chevy or GMC radio without paying a fee?

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.

Is it possible to get a GM radio code?

Most GM dealerships will try to charge you a lot of money for a radio retrieval code, but it’s possible to get it yourself in a just a few short minutes, provided you know the dealer code associated with your vehicle’s radio.

How do you put a three digit code on a car radio?